Linux-mm Archive on lore.kernel.org
 help / color / Atom feed
From: Anshuman Khandual <anshuman.khandual@arm.com>
To: Minchan Kim <minchan@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	linux-mm <linux-mm@kvack.org>, Michal Hocko <mhocko@suse.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Tim Murray <timmurray@google.com>,
	Joel Fernandes <joel@joelfernandes.org>,
	Suren Baghdasaryan <surenb@google.com>,
	Daniel Colascione <dancol@google.com>,
	Shakeel Butt <shakeelb@google.com>,
	Sonny Rao <sonnyrao@google.com>,
	Brian Geffon <bgeffon@google.com>
Subject: Re: [RFC 0/7] introduce memory hinting API for external process
Date: Mon, 20 May 2019 12:07:42 +0530
Message-ID: <dbe801f0-4bbe-5f6e-9053-4b7deb38e235@arm.com> (raw)
In-Reply-To: <20190520035254.57579-1-minchan@kernel.org>



On 05/20/2019 09:22 AM, Minchan Kim wrote:
> - Problem
> 
> Naturally, cached apps were dominant consumers of memory on the system.
> However, they were not significant consumers of swap even though they are
> good candidate for swap. Under investigation, swapping out only begins
> once the low zone watermark is hit and kswapd wakes up, but the overall
> allocation rate in the system might trip lmkd thresholds and cause a cached
> process to be killed(we measured performance swapping out vs. zapping the
> memory by killing a process. Unsurprisingly, zapping is 10x times faster
> even though we use zram which is much faster than real storage) so kill
> from lmkd will often satisfy the high zone watermark, resulting in very
> few pages actually being moved to swap.

Getting killed by lmkd which is triggered by custom system memory allocation
parameters and hence not being able to swap out is a problem ? But is not the
problem created by lmkd itself.

Or Is the objective here is reduce the number of processes which get killed by
lmkd by triggering swapping for the unused memory (user hinted) sooner so that
they dont get picked by lmkd. Under utilization for zram hardware is a concern
here as well ?

Swapping out memory into zram wont increase the latency for a hot start ? Or
is it because as it will prevent a fresh cold start which anyway will be slower
than a slow hot start. Just being curious.


  parent reply index

Thread overview: 138+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20  3:52 Minchan Kim
2019-05-20  3:52 ` [RFC 1/7] mm: introduce MADV_COOL Minchan Kim
2019-05-20  8:16   ` Michal Hocko
2019-05-20  8:19     ` Michal Hocko
2019-05-20 15:08       ` Suren Baghdasaryan
2019-05-20 22:55       ` Minchan Kim
2019-05-20 22:54     ` Minchan Kim
2019-05-21  6:04       ` Michal Hocko
2019-05-21  9:11         ` Minchan Kim
2019-05-21 10:05           ` Michal Hocko
2019-05-28  8:53   ` Hillf Danton
2019-05-28 10:58   ` Minchan Kim
2019-05-20  3:52 ` [RFC 2/7] mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM Minchan Kim
2019-05-20 16:50   ` Johannes Weiner
2019-05-20 22:57     ` Minchan Kim
2019-05-20  3:52 ` [RFC 3/7] mm: introduce MADV_COLD Minchan Kim
2019-05-20  8:27   ` Michal Hocko
2019-05-20 23:00     ` Minchan Kim
2019-05-21  6:08       ` Michal Hocko
2019-05-21  9:13         ` Minchan Kim
2019-05-28 14:54   ` Hillf Danton
2019-05-30  0:45   ` Minchan Kim
2019-05-20  3:52 ` [RFC 4/7] mm: factor out madvise's core functionality Minchan Kim
2019-05-20 14:26   ` Oleksandr Natalenko
2019-05-21  1:26     ` Minchan Kim
2019-05-21  6:36       ` Oleksandr Natalenko
2019-05-21  6:50         ` Michal Hocko
2019-05-21  7:06           ` Oleksandr Natalenko
2019-05-21 10:52             ` Minchan Kim
2019-05-21 11:00               ` Michal Hocko
2019-05-21 11:24                 ` Minchan Kim
2019-05-21 11:32                   ` Michal Hocko
2019-05-21 10:49         ` Minchan Kim
2019-05-21 10:55           ` Michal Hocko
2019-05-20  3:52 ` [RFC 5/7] mm: introduce external memory hinting API Minchan Kim
2019-05-20  9:18   ` Michal Hocko
2019-05-21  2:41     ` Minchan Kim
2019-05-21  6:17       ` Michal Hocko
2019-05-21 10:32         ` Minchan Kim
2019-05-21  9:01   ` Christian Brauner
2019-05-21 11:35     ` Minchan Kim
2019-05-21 11:51       ` Christian Brauner
2019-05-21 15:31   ` Oleg Nesterov
2019-05-27  7:43     ` Minchan Kim
2019-05-27 15:12       ` Oleg Nesterov
2019-05-27 23:33         ` Minchan Kim
2019-05-28  7:23           ` Michal Hocko
2019-05-29  3:41   ` Hillf Danton
2019-05-30  0:38   ` Minchan Kim
2019-05-20  3:52 ` [RFC 6/7] mm: extend process_madvise syscall to support vector arrary Minchan Kim
2019-05-20  9:22   ` Michal Hocko
2019-05-21  2:48     ` Minchan Kim
2019-05-21  6:24       ` Michal Hocko
2019-05-21 10:26         ` Minchan Kim
2019-05-21 10:37           ` Michal Hocko
2019-05-27  7:49             ` Minchan Kim
2019-05-29 10:08               ` Daniel Colascione
2019-05-29 10:33                 ` Michal Hocko
2019-05-30  2:17                   ` Minchan Kim
2019-05-30  6:57                     ` Michal Hocko
2019-05-30  8:02                       ` Minchan Kim
2019-05-30 16:19                         ` Daniel Colascione
2019-05-30 18:47                         ` Michal Hocko
2019-05-29  4:14   ` Hillf Danton
2019-05-30  0:35   ` Minchan Kim
2019-05-20  3:52 ` [RFC 7/7] mm: madvise support MADV_ANONYMOUS_FILTER and MADV_FILE_FILTER Minchan Kim
2019-05-20  9:28   ` Michal Hocko
2019-05-21  2:55     ` Minchan Kim
2019-05-21  6:26       ` Michal Hocko
2019-05-27  7:58         ` Minchan Kim
2019-05-27 12:44           ` Michal Hocko
2019-05-28  3:26             ` Minchan Kim
2019-05-28  6:29               ` Michal Hocko
2019-05-28  8:13                 ` Minchan Kim
2019-05-28  8:31                   ` Daniel Colascione
2019-05-28  8:49                     ` Minchan Kim
2019-05-28  9:08                       ` Michal Hocko
2019-05-28  9:39                         ` Daniel Colascione
2019-05-28 10:33                           ` Michal Hocko
2019-05-28 11:21                             ` Daniel Colascione
2019-05-28 11:49                               ` Michal Hocko
2019-05-28 12:11                                 ` Daniel Colascione
2019-05-28 12:32                                   ` Michal Hocko
2019-05-28 10:32                         ` Minchan Kim
2019-05-28 10:41                           ` Michal Hocko
2019-05-28 11:12                             ` Minchan Kim
2019-05-28 11:28                               ` Michal Hocko
2019-05-28 11:42                                 ` Daniel Colascione
2019-05-28 11:56                                   ` Michal Hocko
2019-05-28 12:18                                     ` Daniel Colascione
2019-05-28 12:38                                       ` Michal Hocko
2019-05-28 12:10                                   ` Minchan Kim
2019-05-28 11:44                                 ` Minchan Kim
2019-05-28 11:51                                   ` Daniel Colascione
2019-05-28 12:06                                   ` Michal Hocko
2019-05-28 12:22                                     ` Minchan Kim
2019-05-28 11:28                             ` Daniel Colascione
2019-05-21 15:33       ` Johannes Weiner
2019-05-22  1:50         ` Minchan Kim
2019-05-29  4:36   ` Hillf Danton
2019-05-30  1:00   ` Minchan Kim
2019-05-20  6:37 ` Anshuman Khandual [this message]
2019-05-20 16:59   ` [RFC 0/7] introduce memory hinting API for external process Tim Murray
2019-05-21  2:55     ` Anshuman Khandual
2019-05-21  5:14       ` Minchan Kim
2019-05-21 10:34       ` Michal Hocko
2019-05-28 10:50         ` Anshuman Khandual
2019-05-21 12:56       ` Shakeel Butt
2019-05-22  4:15         ` Brian Geffon
2019-05-22  4:23         ` Brian Geffon
2019-05-20  9:28 ` Michal Hocko
2019-05-20 14:42 ` Oleksandr Natalenko
2019-05-21  2:56   ` Minchan Kim
2019-05-20 16:46 ` Johannes Weiner
2019-05-21  4:39   ` Minchan Kim
2019-05-21  6:32     ` Michal Hocko
2019-05-21  1:44 ` Matthew Wilcox
2019-05-21  5:01   ` Minchan Kim
2019-05-21  6:34   ` Michal Hocko
2019-05-21  8:42 ` Christian Brauner
2019-05-21 11:05   ` Minchan Kim
2019-05-21 11:30     ` Christian Brauner
2019-05-21 11:39       ` Christian Brauner
2019-05-22  5:11         ` Daniel Colascione
2019-05-22  8:22           ` Christian Brauner
2019-05-22 13:16             ` Daniel Colascione
2019-05-22 14:52               ` Christian Brauner
2019-05-22 15:17                 ` Daniel Colascione
2019-05-22 15:48                   ` Christian Brauner
2019-05-22 15:57                     ` Daniel Colascione
2019-05-22 16:01                       ` Christian Brauner
2019-05-22 16:01                         ` Daniel Colascione
2019-05-23 13:07                           ` Minchan Kim
2019-05-27  8:06                             ` Minchan Kim
2019-05-21 11:41       ` Minchan Kim
2019-05-21 12:04         ` Christian Brauner
2019-05-21 12:15           ` Oleksandr Natalenko
2019-05-21 12:53 ` Shakeel Butt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dbe801f0-4bbe-5f6e-9053-4b7deb38e235@arm.com \
    --to=anshuman.khandual@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=bgeffon@google.com \
    --cc=dancol@google.com \
    --cc=hannes@cmpxchg.org \
    --cc=joel@joelfernandes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=shakeelb@google.com \
    --cc=sonnyrao@google.com \
    --cc=surenb@google.com \
    --cc=timmurray@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mm Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mm/0 linux-mm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mm linux-mm/ https://lore.kernel.org/linux-mm \
		linux-mm@kvack.org
	public-inbox-index linux-mm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kvack.linux-mm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git