* [RFC PATCH 0/8] Add MMC packed request support
@ 2020-01-17 5:24 Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 1/8] block: Change the dispatch_request() API to support batch requests Baolin Wang
` (7 more replies)
0 siblings, 8 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
Hi All,
Now some SD/MMC controllers can support packed command or packed request,
that means it can package multiple requests to host controller to be handled
at one time, which can improve the I/O performence. Thus this patch set
tries to add the MMC packed request function to support packed request or
packed command.
In this patch set, I changed the dispatch_request() interface to allow
dispatching a batch of requests to hardware and expanded the MMC software
queue to support packed request. I also implemented the SD host ADMA3
transfer mode to support packed request. The ADMA3 transfer mode can process
a multi-block data transfer by using a pair of command descriptor and ADMA2
descriptor. In future we can easily expand the MMC packed function to support
packed command.
Below are some comparison data between packed request and non-packed request
with fio tool. The fio command I used is like below with changing the
'--rw' parameter and enabling the direct IO flag to measure the actual hardware
transfer speed. I tested 5 times for each case and output a average speed.
./fio --filename=/dev/mmcblk0p30 --direct=1 --iodepth=20 --rw=read --bs=4K --size=512M --group_reporting --numjobs=20 --name=test_read
My eMMC card working at HS400 Enhanced strobe mode:
[ 2.229856] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 2.237566] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
[ 2.242621] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.00 MiB
[ 2.249110] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.00 MiB
[ 2.255307] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB, chardev (248:0)
1. Non-packed request
1) Sequential read:
Speed: 59.2MiB/s, 60.4MiB/s, 63.6MiB/s, 60.3MiB/s, 59.9MiB/s
Average speed: 60.68MiB/s
2) Random read:
Speed: 31.3MiB/s, 31.4MiB/s, 31.5MiB/s, 31.3MiB/s, 31.3MiB/s
Average speed: 31.36MiB/s
3) Sequential write:
Speed: 71MiB/s, 71.8MiB/s, 72.3MiB/s, 72.2MiB/s, 71MiB/s
Average speed: 71.66MiB/s
4) Random write:
Speed: 68.9MiB/s, 68.7MiB/s, 68.8MiB/s, 68.6MiB/s, 68.8MiB/s
Average speed: 68.76MiB/s
2. Packed request
1) Sequential read:
Speed: 230MiB/s, 230MiB/s, 229MiB/s, 230MiB/s, 229MiB/s
Average speed: 229.6MiB/s
2) Random read:
Speed: 181MiB/s, 181MiB/s, 181MiB/s, 180MiB/s, 181MiB/s
Average speed: 180.8MiB/s
3) Sequential write:
Speed: 175MiB/s, 171MiB/s, 171MiB/s, 172MiB/s, 171MiB/s
Average speed: 172MiB/s
4) Random write:
Speed: 169MiB/s, 169MiB/s, 171MiB/s, 167MiB/s, 170MiB/s
Average speed: 169.2MiB/s
From above data, we can see the packed request can improve the performance
greatly. Any comments are welcome. Thanks a lot.
Baolin Wang (8):
block: Change the dispatch_request() API to support batch requests
block: Allow sending a batch of requests from the scheduler to
hardware
mmc: Add MMC packed request support for MMC software queue
mmc: host: sdhci: Introduce ADMA3 transfer mode
mmc: host: sdhci: Factor out the command configuration
mmc: host: sdhci: Remove redundant sg_count member of struct
sdhci_host
mmc: host: sdhci: Add MMC packed request support
mmc: host: sdhci-sprd: Add MMC packed request support
block/bfq-iosched.c | 38 +++-
block/blk-mq-sched.c | 15 +-
block/blk-mq.c | 2 -
block/blk-settings.c | 13 ++
block/kyber-iosched.c | 80 ++++---
block/mq-deadline.c | 26 ++-
drivers/mmc/core/block.c | 22 +-
drivers/mmc/core/block.h | 3 +-
drivers/mmc/core/core.c | 26 +++
drivers/mmc/core/core.h | 2 +
drivers/mmc/core/queue.c | 22 +-
drivers/mmc/host/mmc_hsq.c | 310 ++++++++++++++++++++++---
drivers/mmc/host/mmc_hsq.h | 26 ++-
drivers/mmc/host/sdhci-sprd.c | 30 ++-
drivers/mmc/host/sdhci.c | 499 +++++++++++++++++++++++++++++++++++------
drivers/mmc/host/sdhci.h | 61 ++++-
include/linux/blkdev.h | 8 +
include/linux/elevator.h | 2 +-
include/linux/mmc/core.h | 6 +
include/linux/mmc/host.h | 9 +
20 files changed, 1015 insertions(+), 185 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 10+ messages in thread
* [RFC PATCH 1/8] block: Change the dispatch_request() API to support batch requests
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
2020-02-10 9:21 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 2/8] block: Allow sending a batch of requests from the scheduler to hardware Baolin Wang
` (6 subsequent siblings)
7 siblings, 1 reply; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
Now some SD/MMC host controllers can support packed command or packed request,
that means we can package several requests to host controller at one time
to improve performence.
But the blk-mq always takes one request from the scheduler and dispatch it to
the device, regardless of the driver or the scheduler, so there should only
ever be one request in the local list in blk_mq_dispatch_rq_list(), that means
the bd.last is always true and the driver can not use bd.last to decide if
there are requests are pending now in hardware queue to help to package
requests.
Thus this is a preparation patch, which tries to change the dispatch_request()
API to allow dispatching more than one request from the scheduler.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
block/bfq-iosched.c | 12 +++++++++---
block/blk-mq-sched.c | 15 ++++-----------
block/kyber-iosched.c | 20 +++++++++++++-------
block/mq-deadline.c | 12 +++++++++---
include/linux/elevator.h | 2 +-
5 files changed, 36 insertions(+), 25 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index ad4af4a..decabc4 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -4774,7 +4774,8 @@ static inline void bfq_update_dispatch_stats(struct request_queue *q,
bool idle_timer_disabled) {}
#endif /* CONFIG_BFQ_CGROUP_DEBUG */
-static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
+static int bfq_dispatch_requests(struct blk_mq_hw_ctx *hctx,
+ struct list_head *list)
{
struct bfq_data *bfqd = hctx->queue->elevator->elevator_data;
struct request *rq;
@@ -4796,7 +4797,12 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
bfq_update_dispatch_stats(hctx->queue, rq, in_serv_queue,
idle_timer_disabled);
- return rq;
+ if (!rq)
+ return 0;
+
+ list_add(&rq->queuelist, list);
+
+ return 1;
}
/*
@@ -6772,7 +6778,7 @@ static ssize_t bfq_low_latency_store(struct elevator_queue *e,
.finish_request = bfq_finish_requeue_request,
.exit_icq = bfq_exit_icq,
.insert_requests = bfq_insert_requests,
- .dispatch_request = bfq_dispatch_request,
+ .dispatch_requests = bfq_dispatch_requests,
.next_request = elv_rb_latter_request,
.former_request = elv_rb_former_request,
.allow_merge = bfq_allow_bio_merge,
diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index ca22afd..f49f9d9 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -90,28 +90,21 @@ static void blk_mq_do_dispatch_sched(struct blk_mq_hw_ctx *hctx)
struct request_queue *q = hctx->queue;
struct elevator_queue *e = q->elevator;
LIST_HEAD(rq_list);
+ int ret;
do {
- struct request *rq;
-
if (e->type->ops.has_work && !e->type->ops.has_work(hctx))
break;
if (!blk_mq_get_dispatch_budget(hctx))
break;
- rq = e->type->ops.dispatch_request(hctx);
- if (!rq) {
+ ret = e->type->ops.dispatch_requests(hctx, &rq_list);
+ if (ret == 0) {
blk_mq_put_dispatch_budget(hctx);
break;
}
- /*
- * Now this rq owns the budget which has to be released
- * if this rq won't be queued to driver via .queue_rq()
- * in blk_mq_dispatch_rq_list().
- */
- list_add(&rq->queuelist, &rq_list);
} while (blk_mq_dispatch_rq_list(q, &rq_list, true));
}
@@ -171,7 +164,7 @@ void blk_mq_sched_dispatch_requests(struct blk_mq_hw_ctx *hctx)
{
struct request_queue *q = hctx->queue;
struct elevator_queue *e = q->elevator;
- const bool has_sched_dispatch = e && e->type->ops.dispatch_request;
+ const bool has_sched_dispatch = e && e->type->ops.dispatch_requests;
LIST_HEAD(rq_list);
/* RCU or SRCU read lock is needed before checking quiesced flag */
diff --git a/block/kyber-iosched.c b/block/kyber-iosched.c
index 34dcea0..8f58434 100644
--- a/block/kyber-iosched.c
+++ b/block/kyber-iosched.c
@@ -796,12 +796,13 @@ static int kyber_get_domain_token(struct kyber_queue_data *kqd,
return NULL;
}
-static struct request *kyber_dispatch_request(struct blk_mq_hw_ctx *hctx)
+static int kyber_dispatch_requests(struct blk_mq_hw_ctx *hctx,
+ struct list_head *list)
{
struct kyber_queue_data *kqd = hctx->queue->elevator->elevator_data;
struct kyber_hctx_data *khd = hctx->sched_data;
struct request *rq;
- int i;
+ int i, ret = 0;
spin_lock(&khd->lock);
@@ -811,8 +812,11 @@ static struct request *kyber_dispatch_request(struct blk_mq_hw_ctx *hctx)
*/
if (khd->batching < kyber_batch_size[khd->cur_domain]) {
rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
- if (rq)
+ if (rq) {
+ list_add(&rq->queuelist, list);
+ ret = 1;
goto out;
+ }
}
/*
@@ -832,14 +836,16 @@ static struct request *kyber_dispatch_request(struct blk_mq_hw_ctx *hctx)
khd->cur_domain++;
rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
- if (rq)
+ if (rq) {
+ list_add(&rq->queuelist, list);
+ ret = 1;
goto out;
+ }
}
- rq = NULL;
out:
spin_unlock(&khd->lock);
- return rq;
+ return ret;
}
static bool kyber_has_work(struct blk_mq_hw_ctx *hctx)
@@ -1020,7 +1026,7 @@ static int kyber_batching_show(void *data, struct seq_file *m)
.finish_request = kyber_finish_request,
.requeue_request = kyber_finish_request,
.completed_request = kyber_completed_request,
- .dispatch_request = kyber_dispatch_request,
+ .dispatch_requests = kyber_dispatch_requests,
.has_work = kyber_has_work,
},
#ifdef CONFIG_BLK_DEBUG_FS
diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index b490f47..9fbffba 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -378,7 +378,8 @@ static struct request *__dd_dispatch_request(struct deadline_data *dd)
* different hardware queue. This is because mq-deadline has shared
* state for all hardware queues, in terms of sorting, FIFOs, etc.
*/
-static struct request *dd_dispatch_request(struct blk_mq_hw_ctx *hctx)
+static int dd_dispatch_requests(struct blk_mq_hw_ctx *hctx,
+ struct list_head *list)
{
struct deadline_data *dd = hctx->queue->elevator->elevator_data;
struct request *rq;
@@ -387,7 +388,12 @@ static struct request *dd_dispatch_request(struct blk_mq_hw_ctx *hctx)
rq = __dd_dispatch_request(dd);
spin_unlock(&dd->lock);
- return rq;
+ if (!rq)
+ return 0;
+
+ list_add(&rq->queuelist, list);
+
+ return 1;
}
static void dd_exit_queue(struct elevator_queue *e)
@@ -774,7 +780,7 @@ static void deadline_dispatch_stop(struct seq_file *m, void *v)
static struct elevator_type mq_deadline = {
.ops = {
.insert_requests = dd_insert_requests,
- .dispatch_request = dd_dispatch_request,
+ .dispatch_requests = dd_dispatch_requests,
.prepare_request = dd_prepare_request,
.finish_request = dd_finish_request,
.next_request = elv_rb_latter_request,
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 901bda3..a65bf5d 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -42,7 +42,7 @@ struct elevator_mq_ops {
void (*prepare_request)(struct request *, struct bio *bio);
void (*finish_request)(struct request *);
void (*insert_requests)(struct blk_mq_hw_ctx *, struct list_head *, bool);
- struct request *(*dispatch_request)(struct blk_mq_hw_ctx *);
+ int (*dispatch_requests)(struct blk_mq_hw_ctx *, struct list_head *);
bool (*has_work)(struct blk_mq_hw_ctx *);
void (*completed_request)(struct request *, u64);
void (*requeue_request)(struct request *);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RFC PATCH 2/8] block: Allow sending a batch of requests from the scheduler to hardware
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 1/8] block: Change the dispatch_request() API to support batch requests Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 3/8] mmc: Add MMC packed request support for MMC software queue Baolin Wang
` (5 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
As we know, some SD/MMC host controllers can support packed request,
that means we can package several requests to host controller at one
time to improve performence. So the hardware driver expects the blk-mq
can dispatch a batch of requests at one time, and driver can use bd.last
to indicate if it is the last request in the batch to help to combine
requests as much as possible.
Thus we should add batch requests setting from the block driver to tell
the scheduler how many requests can be dispatched in a batch, as well
as changing the scheduler to dispatch more than one request if setting
the maximum batch requests number.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
block/bfq-iosched.c | 32 +++++++++++++--------
block/blk-mq.c | 2 --
block/blk-settings.c | 13 +++++++++
block/kyber-iosched.c | 74 ++++++++++++++++++++++++++----------------------
block/mq-deadline.c | 20 +++++++++----
include/linux/blkdev.h | 8 ++++++
6 files changed, 95 insertions(+), 54 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index decabc4..bef1187 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -4778,29 +4778,37 @@ static int bfq_dispatch_requests(struct blk_mq_hw_ctx *hctx,
struct list_head *list)
{
struct bfq_data *bfqd = hctx->queue->elevator->elevator_data;
+ unsigned int batch_reqs = queue_max_batch_requests(hctx->queue) ? : 1;
struct request *rq;
struct bfq_queue *in_serv_queue;
bool waiting_rq, idle_timer_disabled;
+ int i;
- spin_lock_irq(&bfqd->lock);
+ for (i = 0; i < batch_reqs; i++) {
+ spin_lock_irq(&bfqd->lock);
- in_serv_queue = bfqd->in_service_queue;
- waiting_rq = in_serv_queue && bfq_bfqq_wait_request(in_serv_queue);
+ in_serv_queue = bfqd->in_service_queue;
+ waiting_rq = in_serv_queue && bfq_bfqq_wait_request(in_serv_queue);
- rq = __bfq_dispatch_request(hctx);
+ rq = __bfq_dispatch_request(hctx);
- idle_timer_disabled =
- waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
+ idle_timer_disabled =
+ waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
- spin_unlock_irq(&bfqd->lock);
+ spin_unlock_irq(&bfqd->lock);
- bfq_update_dispatch_stats(hctx->queue, rq, in_serv_queue,
- idle_timer_disabled);
+ bfq_update_dispatch_stats(hctx->queue, rq, in_serv_queue,
+ idle_timer_disabled);
- if (!rq)
- return 0;
+ if (!rq) {
+ if (list_empty(list))
+ return 0;
- list_add(&rq->queuelist, list);
+ return 1;
+ }
+
+ list_add(&rq->queuelist, list);
+ }
return 1;
}
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 323c9cb..e9a6677 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1185,8 +1185,6 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
if (list_empty(list))
return false;
- WARN_ON(!list_is_singular(list) && got_budget);
-
/*
* Now process all the entries, sending them to the driver.
*/
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 5f6dcc7..29e3a3c 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -59,6 +59,7 @@ void blk_set_default_limits(struct queue_limits *lim)
lim->io_opt = 0;
lim->misaligned = 0;
lim->zoned = BLK_ZONED_NONE;
+ lim->max_batch_reqs = 1;
}
EXPORT_SYMBOL(blk_set_default_limits);
@@ -871,6 +872,18 @@ bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
}
EXPORT_SYMBOL_GPL(blk_queue_can_use_dma_map_merging);
+/**
+ * blk_queue_max_batch_requests - set max requests for batch processing
+ * @q: the request queue for the device
+ * @max_batch_requests: maximum number of requests in a batch
+ **/
+void blk_queue_max_batch_requests(struct request_queue *q,
+ unsigned int max_batch_requests)
+{
+ q->limits.max_batch_reqs = max_batch_requests;
+}
+EXPORT_SYMBOL(blk_queue_max_batch_requests);
+
static int __init blk_settings_init(void)
{
blk_max_low_pfn = max_low_pfn - 1;
diff --git a/block/kyber-iosched.c b/block/kyber-iosched.c
index 8f58434..3a84a5f 100644
--- a/block/kyber-iosched.c
+++ b/block/kyber-iosched.c
@@ -801,50 +801,56 @@ static int kyber_dispatch_requests(struct blk_mq_hw_ctx *hctx,
{
struct kyber_queue_data *kqd = hctx->queue->elevator->elevator_data;
struct kyber_hctx_data *khd = hctx->sched_data;
+ unsigned int batch_reqs = queue_max_batch_requests(hctx->queue) ? : 1;
struct request *rq;
- int i, ret = 0;
+ int i, j, ret = 0;
spin_lock(&khd->lock);
- /*
- * First, if we are still entitled to batch, try to dispatch a request
- * from the batch.
- */
- if (khd->batching < kyber_batch_size[khd->cur_domain]) {
- rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
- if (rq) {
- list_add(&rq->queuelist, list);
- ret = 1;
- goto out;
+ for (j = 0; j < batch_reqs; j++) {
+ /*
+ * First, if we are still entitled to batch, try to dispatch a
+ * request from the batch.
+ */
+ if (khd->batching < kyber_batch_size[khd->cur_domain]) {
+ rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
+ if (rq) {
+ list_add(&rq->queuelist, list);
+ ret = 1;
+ continue;
+ }
}
- }
-
- /*
- * Either,
- * 1. We were no longer entitled to a batch.
- * 2. The domain we were batching didn't have any requests.
- * 3. The domain we were batching was out of tokens.
- *
- * Start another batch. Note that this wraps back around to the original
- * domain if no other domains have requests or tokens.
- */
- khd->batching = 0;
- for (i = 0; i < KYBER_NUM_DOMAINS; i++) {
- if (khd->cur_domain == KYBER_NUM_DOMAINS - 1)
- khd->cur_domain = 0;
- else
- khd->cur_domain++;
- rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
- if (rq) {
- list_add(&rq->queuelist, list);
- ret = 1;
- goto out;
+ /*
+ * Either,
+ * 1. We were no longer entitled to a batch.
+ * 2. The domain we were batching didn't have any requests.
+ * 3. The domain we were batching was out of tokens.
+ *
+ * Start another batch. Note that this wraps back around to the
+ * original domain if no other domains have requests or tokens.
+ */
+ khd->batching = 0;
+ for (i = 0; i < KYBER_NUM_DOMAINS; i++) {
+ if (khd->cur_domain == KYBER_NUM_DOMAINS - 1)
+ khd->cur_domain = 0;
+ else
+ khd->cur_domain++;
+
+ rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
+ if (rq) {
+ list_add(&rq->queuelist, list);
+ ret = 1;
+ break;
+ }
}
}
-out:
spin_unlock(&khd->lock);
+
+ if (list_empty(list))
+ ret = 0;
+
return ret;
}
diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index 9fbffba..4e3d58a 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -382,16 +382,24 @@ static int dd_dispatch_requests(struct blk_mq_hw_ctx *hctx,
struct list_head *list)
{
struct deadline_data *dd = hctx->queue->elevator->elevator_data;
+ unsigned int batch_reqs = queue_max_batch_requests(hctx->queue) ? : 1;
struct request *rq;
+ int i;
- spin_lock(&dd->lock);
- rq = __dd_dispatch_request(dd);
- spin_unlock(&dd->lock);
+ for (i = 0; i < batch_reqs; i++) {
+ spin_lock(&dd->lock);
+ rq = __dd_dispatch_request(dd);
+ spin_unlock(&dd->lock);
- if (!rq)
- return 0;
+ if (!rq) {
+ if (list_empty(list))
+ return 0;
- list_add(&rq->queuelist, list);
+ return 1;
+ }
+
+ list_add(&rq->queuelist, list);
+ }
return 1;
}
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 47eb22a..9043fdb 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -337,6 +337,7 @@ struct queue_limits {
unsigned int max_write_zeroes_sectors;
unsigned int discard_granularity;
unsigned int discard_alignment;
+ unsigned int max_batch_reqs;
unsigned short logical_block_size;
unsigned short max_segments;
@@ -1109,6 +1110,8 @@ extern void blk_queue_required_elevator_features(struct request_queue *q,
unsigned int features);
extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
struct device *dev);
+extern void blk_queue_max_batch_requests(struct request_queue *q,
+ unsigned int max_batch_requests);
/*
* Number of physical segments as sent to the device.
@@ -1291,6 +1294,11 @@ static inline unsigned int queue_max_segment_size(const struct request_queue *q)
return q->limits.max_segment_size;
}
+static inline unsigned int queue_max_batch_requests(const struct request_queue *q)
+{
+ return q->limits.max_batch_reqs;
+}
+
static inline unsigned short queue_logical_block_size(const struct request_queue *q)
{
int retval = 512;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RFC PATCH 3/8] mmc: Add MMC packed request support for MMC software queue
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 1/8] block: Change the dispatch_request() API to support batch requests Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 2/8] block: Allow sending a batch of requests from the scheduler to hardware Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 4/8] mmc: host: sdhci: Introduce ADMA3 transfer mode Baolin Wang
` (4 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
Some SD controllers can support packed command or packed request, that
means it can package several requests to host controller to be handled
at one time, which can reduce interrutps and improve the DMA transfer.
As a result, the I/O performence can be improved.
Thus this patch adds MMC packed function to support packed requests or
packed command based on the MMC software queue.
The basic concept of this function is that, we try to collect more
requests from block layer as much as possible to be linked into
MMC packed queue by mmc_blk_cqe_issue_rw_rq(). When the last
request of the hardware queue comes, or the collected request numbers
are larger than 16, or a larger request comes, then we can start to
pakage a packed request to host controller. The MMC packed function
also supplies packed algorithm operations to help to package qualified
requests. After finishing the packed request, the MMC packed function
will help to complete each request, at the same time, the MMC packed
queue will allow to collect more requests from block layer. After
completing each request, the MMC packed function can try to package
another packed request to host controller directly in the complete path,
if there are enough requests in MMC packed queue or the request pending
flag is not set. If the pending flag was set, we should let the
mmc_blk_cqe_issue_rw_rq() collect more request as much as possible.i
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/mmc/core/block.c | 22 ++-
drivers/mmc/core/block.h | 3 +-
drivers/mmc/core/core.c | 26 ++++
drivers/mmc/core/core.h | 2 +
drivers/mmc/core/queue.c | 22 ++-
drivers/mmc/host/mmc_hsq.c | 310 ++++++++++++++++++++++++++++++++++++-----
drivers/mmc/host/mmc_hsq.h | 26 +++-
drivers/mmc/host/sdhci-sprd.c | 2 +-
include/linux/mmc/core.h | 6 +
include/linux/mmc/host.h | 9 ++
10 files changed, 375 insertions(+), 53 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index eb5f15f..0715ad0 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1537,7 +1537,8 @@ static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req)
return mmc_blk_cqe_start_req(mq->card->host, mrq);
}
-static int mmc_blk_swq_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+static int mmc_blk_swq_issue_rw_rq(struct mmc_queue *mq, struct request *req,
+ bool last)
{
struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
struct mmc_host *host = mq->card->host;
@@ -1548,19 +1549,25 @@ static int mmc_blk_swq_issue_rw_rq(struct mmc_queue *mq, struct request *req)
mmc_pre_req(host, &mqrq->brq.mrq);
err = mmc_cqe_start_req(host, &mqrq->brq.mrq);
- if (err)
+ if (err) {
mmc_post_req(host, &mqrq->brq.mrq, err);
+ return err;
+ }
- return err;
+ if (last)
+ mmc_cqe_commit_rqs(host, true);
+
+ return 0;
}
-static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req,
+ bool last)
{
struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
struct mmc_host *host = mq->card->host;
if (host->swq_enabled)
- return mmc_blk_swq_issue_rw_rq(mq, req);
+ return mmc_blk_swq_issue_rw_rq(mq, req, last);
mmc_blk_data_prep(mq, mqrq, 0, NULL, NULL);
@@ -2236,7 +2243,8 @@ static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host)
return mmc_blk_rw_wait(mq, NULL);
}
-enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req)
+enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req,
+ bool last)
{
struct mmc_blk_data *md = mq->blkdata;
struct mmc_card *card = md->queue.card;
@@ -2280,7 +2288,7 @@ enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req)
case REQ_OP_READ:
case REQ_OP_WRITE:
if (mq->use_cqe)
- ret = mmc_blk_cqe_issue_rw_rq(mq, req);
+ ret = mmc_blk_cqe_issue_rw_rq(mq, req, last);
else
ret = mmc_blk_mq_issue_rw_rq(mq, req);
break;
diff --git a/drivers/mmc/core/block.h b/drivers/mmc/core/block.h
index 31153f6..8bfb89f 100644
--- a/drivers/mmc/core/block.h
+++ b/drivers/mmc/core/block.h
@@ -9,7 +9,8 @@
enum mmc_issued;
-enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req);
+enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req,
+ bool last);
void mmc_blk_mq_complete(struct request *req);
void mmc_blk_mq_recovery(struct mmc_queue *mq);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index abf8f5e..987aa17 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -329,6 +329,7 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
}
}
+ INIT_LIST_HEAD(&mrq->list);
return 0;
}
@@ -536,6 +537,31 @@ void mmc_cqe_post_req(struct mmc_host *host, struct mmc_request *mrq)
}
EXPORT_SYMBOL(mmc_cqe_post_req);
+/**
+ * mmc_cqe_commit_rqs - Commit requests pending in CQE
+ * @host: MMC host
+ * @last: Indicate if the last request from block layer
+ */
+void mmc_cqe_commit_rqs(struct mmc_host *host, bool last)
+{
+ if (host->cqe_ops->cqe_commit_rqs)
+ host->cqe_ops->cqe_commit_rqs(host, last);
+}
+EXPORT_SYMBOL(mmc_cqe_commit_rqs);
+
+/**
+ * mmc_cqe_is_busy - If CQE is busy or not
+ * @host: MMC host
+ */
+bool mmc_cqe_is_busy(struct mmc_host *host)
+{
+ if (host->cqe_ops->cqe_is_busy)
+ return host->cqe_ops->cqe_is_busy(host);
+
+ return false;
+}
+EXPORT_SYMBOL(mmc_cqe_is_busy);
+
/* Arbitrary 1 second timeout */
#define MMC_CQE_RECOVERY_TIMEOUT 1000
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 575ac02..e72e6f1 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -139,6 +139,8 @@ static inline void mmc_claim_host(struct mmc_host *host)
int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq);
void mmc_cqe_post_req(struct mmc_host *host, struct mmc_request *mrq);
int mmc_cqe_recovery(struct mmc_host *host);
+void mmc_cqe_commit_rqs(struct mmc_host *host, bool last);
+bool mmc_cqe_is_busy(struct mmc_host *host);
/**
* mmc_pre_req - Prepare for a new request
diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index d9086c1..e9967bf 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -285,11 +285,7 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
}
break;
case MMC_ISSUE_ASYNC:
- /*
- * For MMC host software queue, we only allow 2 requests in
- * flight to avoid a long latency.
- */
- if (host->swq_enabled && mq->in_flight[issue_type] > 2) {
+ if (mq->use_cqe && mmc_cqe_is_busy(host)) {
spin_unlock_irq(&mq->lock);
return BLK_STS_RESOURCE;
}
@@ -330,7 +326,7 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
blk_mq_start_request(req);
- issued = mmc_blk_mq_issue_rq(mq, req);
+ issued = mmc_blk_mq_issue_rq(mq, req, bd->last);
switch (issued) {
case MMC_REQ_BUSY:
@@ -362,8 +358,19 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
return ret;
}
+static void mmc_mq_commit_rqs(struct blk_mq_hw_ctx *hctx)
+{
+ struct mmc_queue *mq = hctx->queue->queuedata;
+ struct mmc_card *card = mq->card;
+ struct mmc_host *host = card->host;
+
+ if (mq->use_cqe)
+ mmc_cqe_commit_rqs(host, false);
+}
+
static const struct blk_mq_ops mmc_mq_ops = {
.queue_rq = mmc_mq_queue_rq,
+ .commit_rqs = mmc_mq_commit_rqs,
.init_request = mmc_mq_init_request,
.exit_request = mmc_mq_exit_request,
.complete = mmc_blk_mq_complete,
@@ -390,6 +397,9 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
"merging was advertised but not possible");
blk_queue_max_segments(mq->queue, mmc_get_max_segments(host));
+ if (host->max_packed_reqs != 0)
+ blk_queue_max_batch_requests(mq->queue, host->max_packed_reqs);
+
if (mmc_card_mmc(card))
block_size = card->ext_csd.data_sector_size;
diff --git a/drivers/mmc/host/mmc_hsq.c b/drivers/mmc/host/mmc_hsq.c
index 6a6bdd0..1eef0f8 100644
--- a/drivers/mmc/host/mmc_hsq.c
+++ b/drivers/mmc/host/mmc_hsq.c
@@ -8,22 +8,54 @@
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
#include "mmc_hsq.h"
#define HSQ_NUM_SLOTS 32
#define HSQ_INVALID_TAG HSQ_NUM_SLOTS
+#define HSQ_PACKED_FLUSH_BLOCKS 256
+#define HSQ_PACKED_QUEUE_DEPTH 64
+
+/**
+ * mmc_hsq_packed_algo_rw - the algorithm to package read or write requests
+ * @mmc: the host controller
+ *
+ * TODO: we can add more condition to decide if we can package this
+ * request or not.
+ */
+void mmc_hsq_packed_algo_rw(struct mmc_host *mmc)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ struct hsq_packed *packed = hsq->packed;
+ struct mmc_packed_request *prq = &packed->prq;
+ struct mmc_request *mrq, *t;
+ u32 i = 0;
+
+ list_for_each_entry_safe(mrq, t, &packed->list, list) {
+ if (++i > packed->max_entries)
+ break;
+
+ list_move_tail(&mrq->list, &prq->list);
+ prq->nr_reqs++;
+ }
+}
+EXPORT_SYMBOL_GPL(mmc_hsq_packed_algo_rw);
+
static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
{
+ struct hsq_packed *packed = hsq->packed;
struct mmc_host *mmc = hsq->mmc;
struct hsq_slot *slot;
+ struct mmc_request *mrq;
unsigned long flags;
+ int ret;
spin_lock_irqsave(&hsq->lock, flags);
/* Make sure we are not already running a request now */
- if (hsq->mrq) {
+ if (hsq->mrq || (packed && packed->prq.nr_reqs)) {
spin_unlock_irqrestore(&hsq->lock, flags);
return;
}
@@ -34,16 +66,58 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
return;
}
- slot = &hsq->slot[hsq->next_tag];
- hsq->mrq = slot->mrq;
- hsq->qcnt--;
+ if (packed) {
+ /* Try to package requests */
+ packed->ops->packed_algo(mmc);
+
+ packed->busy = true;
+ hsq->qcnt -= packed->prq.nr_reqs;
+ } else {
+ slot = &hsq->slot[hsq->next_tag];
+ hsq->mrq = slot->mrq;
+ hsq->qcnt--;
+ }
spin_unlock_irqrestore(&hsq->lock, flags);
- if (mmc->ops->request_atomic)
- mmc->ops->request_atomic(mmc, hsq->mrq);
- else
- mmc->ops->request(mmc, hsq->mrq);
+ if (!packed) {
+ if (mmc->ops->request_atomic)
+ mmc->ops->request_atomic(mmc, hsq->mrq);
+ else
+ mmc->ops->request(mmc, hsq->mrq);
+
+ return;
+ }
+
+ if (packed->ops->prepare_hardware) {
+ ret = packed->ops->prepare_hardware(mmc);
+ if (ret) {
+ pr_err("failed to prepare hardware\n");
+ goto error;
+ }
+ }
+
+ ret = packed->ops->packed_request(mmc, &packed->prq);
+ if (ret) {
+ pr_err("failed to packed requests\n");
+ goto error;
+ }
+
+ return;
+
+error:
+ spin_lock_irqsave(&hsq->lock, flags);
+
+ list_for_each_entry(mrq, &packed->prq.list, list) {
+ struct mmc_data *data = mrq->data;
+
+ data->error = ret;
+ data->bytes_xfered = 0;
+ }
+
+ spin_unlock_irqrestore(&hsq->lock, flags);
+
+ mmc_hsq_finalize_packed_request(mmc, &packed->prq);
}
static void mmc_hsq_update_next_tag(struct mmc_hsq *hsq, int remains)
@@ -85,16 +159,24 @@ static void mmc_hsq_update_next_tag(struct mmc_hsq *hsq, int remains)
static void mmc_hsq_post_request(struct mmc_hsq *hsq)
{
+ struct hsq_packed *packed = hsq->packed;
+ bool need_pump;
unsigned long flags;
int remains;
spin_lock_irqsave(&hsq->lock, flags);
remains = hsq->qcnt;
- hsq->mrq = NULL;
-
- /* Update the next available tag to be queued. */
- mmc_hsq_update_next_tag(hsq, remains);
+ if (packed) {
+ need_pump = !packed->rqs_pending;
+ packed->prq.nr_reqs = 0;
+ } else {
+ need_pump = true;
+ hsq->mrq = NULL;
+
+ /* Update the next available tag to be queued. */
+ mmc_hsq_update_next_tag(hsq, remains);
+ }
if (hsq->waiting_for_idle && !remains) {
hsq->waiting_for_idle = false;
@@ -110,10 +192,17 @@ static void mmc_hsq_post_request(struct mmc_hsq *hsq)
spin_unlock_irqrestore(&hsq->lock, flags);
/*
- * Try to pump new request to host controller as fast as possible,
- * after completing previous request.
- */
- if (remains > 0)
+ * For non-packed request mode, we should try to pump new request to
+ * host controller as fast as possible if there are pending requests,
+ * after completing previous request.
+ *
+ * For packed request mode, If there are not enough requests in queue
+ * and the request pending flag was set, then do not pump requests here,
+ * instead we should let the mmc_blk_swq_issue_rw_rq() combine more
+ * requests and pump them.
+ */
+ if ((need_pump && remains > 0) ||
+ (packed && remains >= packed->max_entries))
mmc_hsq_pump_requests(hsq);
}
@@ -152,6 +241,104 @@ bool mmc_hsq_finalize_request(struct mmc_host *mmc, struct mmc_request *mrq)
}
EXPORT_SYMBOL_GPL(mmc_hsq_finalize_request);
+/**
+ * mmc_hsq_finalize_packed_request - finalize one packed request
+ * @mmc: the host controller
+ * @prq: the packed request need to be finalized
+ */
+void mmc_hsq_finalize_packed_request(struct mmc_host *mmc,
+ struct mmc_packed_request *prq)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ struct hsq_packed *packed = hsq->packed;
+ struct mmc_request *mrq, *t;
+ LIST_HEAD(head);
+ unsigned long flags;
+
+ if (!packed || !prq)
+ return;
+
+ if (packed->ops->unprepare_hardware &&
+ packed->ops->unprepare_hardware(mmc))
+ pr_err("failed to unprepare hardware\n");
+
+ /*
+ * Clear busy flag to allow collecting more requests into command
+ * queue, but now we can not pump them to controller, we should wait
+ * for all requests are completed. During the period of completing
+ * requests, we should collect more requests from block layer as much
+ * as possible.
+ */
+ spin_lock_irqsave(&hsq->lock, flags);
+ list_splice_tail_init(&prq->list, &head);
+ packed->busy = false;
+ spin_unlock_irqrestore(&hsq->lock, flags);
+
+ list_for_each_entry_safe(mrq, t, &head, list) {
+ list_del(&mrq->list);
+
+ mmc_cqe_request_done(mmc, mrq);
+ }
+
+ mmc_hsq_post_request(hsq);
+}
+EXPORT_SYMBOL_GPL(mmc_hsq_finalize_packed_request);
+
+static void mmc_hsq_commit_rqs(struct mmc_host *mmc, bool last)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ struct hsq_packed *packed = hsq->packed;
+
+ if (!packed)
+ return;
+
+ spin_lock_irq(&hsq->lock);
+
+ /* Set pending flag which indicates more request will be coming */
+ if (!last && !packed->rqs_pending)
+ packed->rqs_pending = true;
+
+ spin_unlock_irq(&hsq->lock);
+
+ /*
+ * If the last request is coming in hardware queue, then pump requests
+ * to controller as fast as possible.
+ */
+ if (last)
+ mmc_hsq_pump_requests(hsq);
+}
+
+static bool mmc_hsq_is_busy(struct mmc_host *mmc)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ struct hsq_packed *packed = hsq->packed;
+ unsigned long flags;
+ bool busy;
+
+ spin_lock_irqsave(&hsq->lock, flags);
+
+ /*
+ * For packed mode, when hardware is busy, we can only allow maximum
+ * packed number requests to be ready in software queue to be queued
+ * after previous packed request is completed, which avoiding long
+ * latency.
+ *
+ * For non-packed mode, we can only allow 2 requests in flight to avoid
+ * long latency.
+ *
+ * Otherwise return BLK_STS_RESOURCE to tell block layer to dispatch
+ * requests later.
+ */
+ if (packed)
+ busy = packed->busy && hsq->qcnt >= packed->max_entries;
+ else
+ busy = hsq->qcnt > 1;
+
+ spin_unlock_irqrestore(&hsq->lock, flags);
+
+ return busy;
+}
+
static void mmc_hsq_recovery_start(struct mmc_host *mmc)
{
struct mmc_hsq *hsq = mmc->cqe_private;
@@ -187,7 +374,8 @@ static void mmc_hsq_recovery_finish(struct mmc_host *mmc)
static int mmc_hsq_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmc_hsq *hsq = mmc->cqe_private;
- int tag = mrq->tag;
+ struct hsq_packed *packed = hsq->packed;
+ int nr_rqs = 0, tag = mrq->tag;
spin_lock_irq(&hsq->lock);
@@ -202,20 +390,41 @@ static int mmc_hsq_request(struct mmc_host *mmc, struct mmc_request *mrq)
return -EBUSY;
}
- hsq->slot[tag].mrq = mrq;
+ hsq->qcnt++;
- /*
- * Set the next tag as current request tag if no available
- * next tag.
- */
- if (hsq->next_tag == HSQ_INVALID_TAG)
- hsq->next_tag = tag;
+ if (packed) {
+ list_add_tail(&mrq->list, &packed->list);
- hsq->qcnt++;
+ /* New request comes, then clear pending flag */
+ if (packed->rqs_pending)
+ packed->rqs_pending = false;
+
+ nr_rqs = hsq->qcnt;
+ } else {
+ hsq->slot[tag].mrq = mrq;
+
+ /*
+ * Set the next tag as current request tag if no available
+ * next tag.
+ */
+ if (hsq->next_tag == HSQ_INVALID_TAG)
+ hsq->next_tag = tag;
+ }
spin_unlock_irq(&hsq->lock);
- mmc_hsq_pump_requests(hsq);
+ /*
+ * For non-packed request mode, we should pump requests as soon as
+ * possible.
+ *
+ * For the packed request mode, if it is a larger request or the
+ * request count is larger than the maximum packed number, we
+ * should pump requests to controller. Otherwise we should try to
+ * combine requests as much as we can.
+ */
+ if (!packed || mrq->data->blocks > HSQ_PACKED_FLUSH_BLOCKS ||
+ nr_rqs >= packed->max_entries)
+ mmc_hsq_pump_requests(hsq);
return 0;
}
@@ -228,12 +437,17 @@ static void mmc_hsq_post_req(struct mmc_host *mmc, struct mmc_request *mrq)
static bool mmc_hsq_queue_is_idle(struct mmc_hsq *hsq, int *ret)
{
+ struct hsq_packed *packed = hsq->packed;
bool is_idle;
spin_lock_irq(&hsq->lock);
- is_idle = (!hsq->mrq && !hsq->qcnt) ||
- hsq->recovery_halt;
+ if (packed)
+ is_idle = (!packed->prq.nr_reqs && !hsq->qcnt) ||
+ hsq->recovery_halt;
+ else
+ is_idle = (!hsq->mrq && !hsq->qcnt) ||
+ hsq->recovery_halt;
*ret = hsq->recovery_halt ? -EBUSY : 0;
hsq->waiting_for_idle = !is_idle;
@@ -310,18 +524,40 @@ static int mmc_hsq_enable(struct mmc_host *mmc, struct mmc_card *card)
.cqe_wait_for_idle = mmc_hsq_wait_for_idle,
.cqe_recovery_start = mmc_hsq_recovery_start,
.cqe_recovery_finish = mmc_hsq_recovery_finish,
+ .cqe_is_busy = mmc_hsq_is_busy,
+ .cqe_commit_rqs = mmc_hsq_commit_rqs,
};
-int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc)
+int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc,
+ const struct hsq_packed_ops *ops, int max_packed)
{
- hsq->num_slots = HSQ_NUM_SLOTS;
- hsq->next_tag = HSQ_INVALID_TAG;
- mmc->cqe_qdepth = HSQ_NUM_SLOTS;
-
- hsq->slot = devm_kcalloc(mmc_dev(mmc), hsq->num_slots,
- sizeof(struct hsq_slot), GFP_KERNEL);
- if (!hsq->slot)
- return -ENOMEM;
+ if (ops && max_packed > 1) {
+ struct hsq_packed *packed;
+
+ packed = devm_kzalloc(mmc_dev(mmc), sizeof(struct hsq_packed),
+ GFP_KERNEL);
+ if (!packed)
+ return -ENOMEM;
+
+ packed->ops = ops;
+ packed->max_entries = max_packed;
+ INIT_LIST_HEAD(&packed->list);
+ INIT_LIST_HEAD(&packed->prq.list);
+
+ hsq->packed = packed;
+ mmc->cqe_qdepth = HSQ_PACKED_QUEUE_DEPTH;
+ mmc->max_packed_reqs = max_packed;
+ } else {
+ hsq->num_slots = HSQ_NUM_SLOTS;
+ hsq->next_tag = HSQ_INVALID_TAG;
+ mmc->cqe_qdepth = HSQ_NUM_SLOTS;
+
+ hsq->slot = devm_kcalloc(mmc_dev(mmc), hsq->num_slots,
+ sizeof(struct hsq_slot),
+ GFP_KERNEL);
+ if (!hsq->slot)
+ return -ENOMEM;
+ }
hsq->mmc = mmc;
hsq->mmc->cqe_private = hsq;
diff --git a/drivers/mmc/host/mmc_hsq.h b/drivers/mmc/host/mmc_hsq.h
index d51beb7..c3d3bc7 100644
--- a/drivers/mmc/host/mmc_hsq.h
+++ b/drivers/mmc/host/mmc_hsq.h
@@ -2,6 +2,24 @@
#ifndef LINUX_MMC_HSQ_H
#define LINUX_MMC_HSQ_H
+struct hsq_packed_ops {
+ void (*packed_algo)(struct mmc_host *mmc);
+ int (*prepare_hardware)(struct mmc_host *mmc);
+ int (*unprepare_hardware)(struct mmc_host *mmc);
+ int (*packed_request)(struct mmc_host *mmc,
+ struct mmc_packed_request *prq);
+};
+
+struct hsq_packed {
+ bool busy;
+ bool rqs_pending;
+ int max_entries;
+
+ struct list_head list;
+ struct mmc_packed_request prq;
+ const struct hsq_packed_ops *ops;
+};
+
struct hsq_slot {
struct mmc_request *mrq;
};
@@ -20,11 +38,17 @@ struct mmc_hsq {
bool enabled;
bool waiting_for_idle;
bool recovery_halt;
+
+ struct hsq_packed *packed;
};
-int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc);
+int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc,
+ const struct hsq_packed_ops *ops, int max_packed);
void mmc_hsq_suspend(struct mmc_host *mmc);
int mmc_hsq_resume(struct mmc_host *mmc);
bool mmc_hsq_finalize_request(struct mmc_host *mmc, struct mmc_request *mrq);
+void mmc_hsq_finalize_packed_request(struct mmc_host *mmc,
+ struct mmc_packed_request *prq);
+void mmc_hsq_packed_algo_rw(struct mmc_host *mmc);
#endif
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index ae9acb8..49afe1c 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -676,7 +676,7 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
goto err_cleanup_host;
}
- ret = mmc_hsq_init(hsq, host->mmc);
+ ret = mmc_hsq_init(hsq, host->mmc, NULL, 0);
if (ret)
goto err_cleanup_host;
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index b7ba881..b1be983 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -165,6 +165,12 @@ struct mmc_request {
bool cap_cmd_during_tfr;
int tag;
+ struct list_head list;
+};
+
+struct mmc_packed_request {
+ struct list_head list;
+ u32 nr_reqs;
};
struct mmc_card;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index cc1a79b..7ac5be1 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -216,6 +216,14 @@ struct mmc_cqe_ops {
* will have zero data bytes transferred.
*/
void (*cqe_recovery_finish)(struct mmc_host *host);
+
+ /* If CQE is busy or not. */
+ bool (*cqe_is_busy)(struct mmc_host *host);
+ /*
+ * Serve the purpose of kicking the hardware to handle pending
+ * requests.
+ */
+ void (*cqe_commit_rqs)(struct mmc_host *host, bool last);
};
struct mmc_async_req {
@@ -385,6 +393,7 @@ struct mmc_host {
unsigned int max_blk_size; /* maximum size of one mmc block */
unsigned int max_blk_count; /* maximum number of blocks in one req */
unsigned int max_busy_timeout; /* max busy timeout in ms */
+ unsigned int max_packed_reqs; /* max number of requests can be packed */
/* private data */
spinlock_t lock; /* lock for claim and bus ops */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RFC PATCH 4/8] mmc: host: sdhci: Introduce ADMA3 transfer mode
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
` (2 preceding siblings ...)
2020-01-17 5:24 ` [RFC PATCH 3/8] mmc: Add MMC packed request support for MMC software queue Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 5/8] mmc: host: sdhci: Factor out the command configuration Baolin Wang
` (3 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
The standard SD host controller can support ADMA3 transfer mode optionally.
The ADMA3 uses command descriptor to issue an SD command, and a multi-block
data transfer is programmed by using a pair of command descriptor and ADMA2
descriptor. ADMA3 performs multiple of multi-block data transfer by using
integrated descriptor.
This is a preparation patch to add ADMA3 structures and help to expand the
ADMA buffer for support ADMA3 transfer mode.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/mmc/host/sdhci.c | 106 ++++++++++++++++++++++++++++++++++++++--------
drivers/mmc/host/sdhci.h | 48 +++++++++++++++++++++
2 files changed, 137 insertions(+), 17 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 004f789..907a35e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -771,7 +771,8 @@ static void sdhci_adma_table_pre(struct sdhci_host *host,
* If this triggers then we have a calculation bug
* somewhere. :/
*/
- WARN_ON((desc - host->adma_table) >= host->adma_table_sz);
+ WARN_ON((desc - host->adma_table) >=
+ host->adma_table_sz * host->adma3_table_cnt);
}
if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
@@ -3805,10 +3806,17 @@ int sdhci_setup_host(struct sdhci_host *host)
(host->caps & SDHCI_CAN_DO_ADMA2))
host->flags |= SDHCI_USE_ADMA;
+ if ((host->quirks2 & SDHCI_QUIRK2_USE_ADMA3_SUPPORT) &&
+ (host->flags & SDHCI_USE_ADMA) &&
+ (host->caps1 & SDHCI_CAN_DO_ADMA3)) {
+ DBG("Enable ADMA3 mode for data transfer\n");
+ host->flags |= SDHCI_USE_ADMA3;
+ }
+
if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
(host->flags & SDHCI_USE_ADMA)) {
DBG("Disabling ADMA as it is marked broken\n");
- host->flags &= ~SDHCI_USE_ADMA;
+ host->flags &= ~(SDHCI_USE_ADMA | SDHCI_USE_ADMA3);
}
if (sdhci_can_64bit_dma(host))
@@ -3826,7 +3834,7 @@ int sdhci_setup_host(struct sdhci_host *host)
if (ret) {
pr_warn("%s: No suitable DMA available - falling back to PIO\n",
mmc_hostname(mmc));
- host->flags &= ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
+ host->flags &= ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA | SDHCI_USE_ADMA3);
ret = 0;
}
@@ -3850,31 +3858,68 @@ int sdhci_setup_host(struct sdhci_host *host)
host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
}
+ host->adma3_table_cnt = 1;
+
+ if (host->flags & SDHCI_USE_ADMA3) {
+ /* We can package maximum 16 requests once */
+ host->adma3_table_cnt = SDHCI_MAX_ADMA3_ENTRIES;
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ host->integr_desc_sz = SDHCI_INTEGR_64_DESC_SZ;
+ else
+ host->integr_desc_sz = SDHCI_INTEGR_32_DESC_SZ;
+
+ host->cmd_desc_sz = SDHCI_ADMA3_CMD_DESC_SZ;
+ host->cmd_table_sz = host->adma3_table_cnt *
+ SDHCI_ADMA3_CMD_DESC_SZ * SDHCI_ADMA3_CMD_DESC_ENTRIES;
+
+ buf = dma_alloc_coherent(mmc_dev(mmc),
+ host->adma3_table_cnt *
+ host->integr_desc_sz,
+ &dma, GFP_KERNEL);
+ if (!buf) {
+ pr_warn("%s: Unable to allocate ADMA3 integrated buffers - falling back to ADMA\n",
+ mmc_hostname(mmc));
+ host->flags &= ~SDHCI_USE_ADMA3;
+ host->adma3_table_cnt = 1;
+ } else {
+ host->integr_table = buf;
+ host->integr_addr = dma;
+ }
+ }
+
host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN;
/*
* Use zalloc to zero the reserved high 32-bits of 128-bit
* descriptors so that they never need to be written.
*/
buf = dma_alloc_coherent(mmc_dev(mmc),
- host->align_buffer_sz + host->adma_table_sz,
+ host->align_buffer_sz *
+ host->adma3_table_cnt +
+ host->cmd_table_sz +
+ host->adma_table_sz *
+ host->adma3_table_cnt,
&dma, GFP_KERNEL);
if (!buf) {
pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
mmc_hostname(mmc));
- host->flags &= ~SDHCI_USE_ADMA;
- } else if ((dma + host->align_buffer_sz) &
+ host->flags &= ~(SDHCI_USE_ADMA | SDHCI_USE_ADMA3);
+ } else if ((dma + host->align_buffer_sz * host->adma3_table_cnt) &
(SDHCI_ADMA2_DESC_ALIGN - 1)) {
pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
mmc_hostname(mmc));
- host->flags &= ~SDHCI_USE_ADMA;
- dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
- host->adma_table_sz, buf, dma);
+ host->flags &= ~(SDHCI_USE_ADMA | SDHCI_USE_ADMA3);
+ dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz *
+ host->adma3_table_cnt +
+ host->cmd_table_sz +
+ host->adma_table_sz *
+ host->adma3_table_cnt, buf, dma);
} else {
host->align_buffer = buf;
host->align_addr = dma;
- host->adma_table = buf + host->align_buffer_sz;
- host->adma_addr = dma + host->align_buffer_sz;
+ host->adma_table = buf + host->align_buffer_sz * host->adma3_table_cnt;
+ host->adma_addr = dma + host->align_buffer_sz * host->adma3_table_cnt;
}
}
@@ -4273,12 +4318,21 @@ int sdhci_setup_host(struct sdhci_host *host)
regulator_disable(mmc->supply.vqmmc);
undma:
if (host->align_buffer)
- dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
- host->adma_table_sz, host->align_buffer,
+ dma_free_coherent(mmc_dev(mmc),
+ host->align_buffer_sz * host->adma3_table_cnt +
+ host->cmd_table_sz +
+ host->adma_table_sz * host->adma3_table_cnt,
+ host->align_buffer,
host->align_addr);
host->adma_table = NULL;
host->align_buffer = NULL;
+ if (host->integr_table)
+ dma_free_coherent(mmc_dev(mmc),
+ host->adma3_table_cnt * host->integr_desc_sz,
+ host->integr_table, host->integr_addr);
+ host->integr_table = NULL;
+
return ret;
}
EXPORT_SYMBOL_GPL(sdhci_setup_host);
@@ -4291,11 +4345,20 @@ void sdhci_cleanup_host(struct sdhci_host *host)
regulator_disable(mmc->supply.vqmmc);
if (host->align_buffer)
- dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
- host->adma_table_sz, host->align_buffer,
+ dma_free_coherent(mmc_dev(mmc),
+ host->align_buffer_sz * host->adma3_table_cnt +
+ host->cmd_table_sz +
+ host->adma_table_sz * host->adma3_table_cnt,
+ host->align_buffer,
host->align_addr);
host->adma_table = NULL;
host->align_buffer = NULL;
+
+ if (host->integr_table)
+ dma_free_coherent(mmc_dev(mmc),
+ host->adma3_table_cnt * host->integr_desc_sz,
+ host->integr_table, host->integr_addr);
+ host->integr_table = NULL;
}
EXPORT_SYMBOL_GPL(sdhci_cleanup_host);
@@ -4423,12 +4486,21 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
regulator_disable(mmc->supply.vqmmc);
if (host->align_buffer)
- dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
- host->adma_table_sz, host->align_buffer,
+ dma_free_coherent(mmc_dev(mmc),
+ host->align_buffer_sz * host->adma3_table_cnt +
+ host->cmd_table_sz +
+ host->adma_table_sz * host->adma3_table_cnt,
+ host->align_buffer,
host->align_addr);
host->adma_table = NULL;
host->align_buffer = NULL;
+
+ if (host->integr_table)
+ dma_free_coherent(mmc_dev(mmc),
+ host->adma3_table_cnt * host->integr_desc_sz,
+ host->integr_table, host->integr_addr);
+ host->integr_table = NULL;
}
EXPORT_SYMBOL_GPL(sdhci_remove_host);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index cecc64b..a5df807 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -274,6 +274,9 @@
#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
+#define SDHCI_ADMA3_ADDRESS 0x78
+#define SDHCI_ADMA3_ADDRESS_HI 0x7c
+
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
@@ -346,6 +349,41 @@ struct sdhci_adma2_64_desc {
#define ADMA2_NOP_END_VALID 0x3
#define ADMA2_END 0x2
+#define SDHCI_MAX_ADMA3_ENTRIES 16
+
+/* ADMA3 command descriptor */
+struct sdhci_adma3_cmd_desc {
+ __le32 cmd;
+ __le32 reg;
+} __packed __aligned(4);
+
+#define ADMA3_TRAN_VALID 0x9
+#define ADMA3_TRAN_END 0xb
+
+/* ADMA3 command descriptor size */
+#define SDHCI_ADMA3_CMD_DESC_ENTRIES 4
+#define SDHCI_ADMA3_CMD_DESC_SZ 8
+
+/* ADMA3 integrated 32-bit descriptor */
+struct sdhci_integr_32_desc {
+ __le32 cmd;
+ __le32 addr;
+} __packed __aligned(4);
+
+#define SDHCI_INTEGR_32_DESC_SZ 8
+
+/* ADMA3 integrated 64-bit descriptor. */
+struct sdhci_integr_64_desc {
+ __le32 cmd;
+ __le32 addr_lo;
+ __le32 addr_hi;
+} __packed __aligned(4);
+
+#define SDHCI_INTEGR_64_DESC_SZ 16
+
+#define ADMA3_INTEGR_TRAN_VALID 0x39
+#define ADMA3_INTEGR_TRAN_END 0x3b
+
/*
* Maximum segments assuming a 512KiB maximum requisition size and a minimum
* 4KiB page size.
@@ -482,6 +520,8 @@ struct sdhci_host {
* block count.
*/
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
+/* use ADMA3 for data read/write if hardware supports */
+#define SDHCI_QUIRK2_USE_ADMA3_SUPPORT (1<<19)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
@@ -517,6 +557,7 @@ struct sdhci_host {
#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
+#define SDHCI_USE_ADMA3 (1<<17) /* Host is ADMA3 capable */
unsigned int version; /* SDHCI spec. version */
@@ -548,14 +589,19 @@ struct sdhci_host {
void *adma_table; /* ADMA descriptor table */
void *align_buffer; /* Bounce buffer */
+ void *integr_table; /* ADMA3 intergrate descriptor table */
size_t adma_table_sz; /* ADMA descriptor table size */
size_t align_buffer_sz; /* Bounce buffer size */
+ size_t cmd_table_sz; /* ADMA3 command descriptor table size */
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
dma_addr_t align_addr; /* Mapped bounce buffer */
+ dma_addr_t integr_addr; /* Mapped ADMA3 intergrate descr. table */
unsigned int desc_sz; /* ADMA descriptor size */
+ unsigned int cmd_desc_sz; /* ADMA3 command descriptor size */
+ unsigned int integr_desc_sz; /* ADMA3 intergrate descriptor size */
struct workqueue_struct *complete_wq; /* Request completion wq */
struct work_struct complete_work; /* Request completion work */
@@ -601,6 +647,8 @@ struct sdhci_host {
/* Host ADMA table count */
u32 adma_table_cnt;
+ /* Host ADMA3 table count */
+ u32 adma3_table_cnt;
u64 data_timeout;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RFC PATCH 5/8] mmc: host: sdhci: Factor out the command configuration
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
` (3 preceding siblings ...)
2020-01-17 5:24 ` [RFC PATCH 4/8] mmc: host: sdhci: Introduce ADMA3 transfer mode Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 6/8] mmc: host: sdhci: Remove redundant sg_count member of struct sdhci_host Baolin Wang
` (2 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
Move the SD command configuration into one separate function to simplify
the sdhci_send_command(). Moreover this function can be used to support
ADMA3 transfer mode in following patches.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/mmc/host/sdhci.c | 65 +++++++++++++++++++++++++++-------------------
1 file changed, 38 insertions(+), 27 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 907a35e..f517121 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1350,9 +1350,43 @@ static void sdhci_finish_data(struct sdhci_host *host)
}
}
-void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+static int sdhci_get_command(struct sdhci_host *host, struct mmc_command *cmd)
{
int flags;
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ pr_err("%s: Unsupported response type!\n",
+ mmc_hostname(host->mmc));
+ cmd->error = -EINVAL;
+ sdhci_finish_mrq(host, cmd->mrq);
+ return -EINVAL;
+ }
+
+ if (!(cmd->flags & MMC_RSP_PRESENT))
+ flags = SDHCI_CMD_RESP_NONE;
+ else if (cmd->flags & MMC_RSP_136)
+ flags = SDHCI_CMD_RESP_LONG;
+ else if (cmd->flags & MMC_RSP_BUSY)
+ flags = SDHCI_CMD_RESP_SHORT_BUSY;
+ else
+ flags = SDHCI_CMD_RESP_SHORT;
+
+ if (cmd->flags & MMC_RSP_CRC)
+ flags |= SDHCI_CMD_CRC;
+ if (cmd->flags & MMC_RSP_OPCODE)
+ flags |= SDHCI_CMD_INDEX;
+
+ /* CMD19 is special in that the Data Present Select should be set */
+ if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
+ cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
+ flags |= SDHCI_CMD_DATA;
+
+ return SDHCI_MAKE_CMD(cmd->opcode, flags);
+}
+
+void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ int command;
u32 mask;
unsigned long timeout;
@@ -1402,32 +1436,9 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
sdhci_set_transfer_mode(host, cmd);
- if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
- pr_err("%s: Unsupported response type!\n",
- mmc_hostname(host->mmc));
- cmd->error = -EINVAL;
- sdhci_finish_mrq(host, cmd->mrq);
+ command = sdhci_get_command(host, cmd);
+ if (command < 0)
return;
- }
-
- if (!(cmd->flags & MMC_RSP_PRESENT))
- flags = SDHCI_CMD_RESP_NONE;
- else if (cmd->flags & MMC_RSP_136)
- flags = SDHCI_CMD_RESP_LONG;
- else if (cmd->flags & MMC_RSP_BUSY)
- flags = SDHCI_CMD_RESP_SHORT_BUSY;
- else
- flags = SDHCI_CMD_RESP_SHORT;
-
- if (cmd->flags & MMC_RSP_CRC)
- flags |= SDHCI_CMD_CRC;
- if (cmd->flags & MMC_RSP_OPCODE)
- flags |= SDHCI_CMD_INDEX;
-
- /* CMD19 is special in that the Data Present Select should be set */
- if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
- cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
- flags |= SDHCI_CMD_DATA;
timeout = jiffies;
if (host->data_timeout)
@@ -1438,7 +1449,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
timeout += 10 * HZ;
sdhci_mod_timer(host, cmd->mrq, timeout);
- sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
+ sdhci_writew(host, command, SDHCI_COMMAND);
}
EXPORT_SYMBOL_GPL(sdhci_send_command);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RFC PATCH 6/8] mmc: host: sdhci: Remove redundant sg_count member of struct sdhci_host
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
` (4 preceding siblings ...)
2020-01-17 5:24 ` [RFC PATCH 5/8] mmc: host: sdhci: Factor out the command configuration Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 7/8] mmc: host: sdhci: Add MMC packed request support Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 8/8] mmc: host: sdhci-sprd: " Baolin Wang
7 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
The mmc_data structure has a member to save the mapped sg count, so
no need introduce a redundant sg_count of struct sdhci_host, remove it.
This is also a preparation patch to support ADMA3 transfer mode.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/mmc/host/sdhci.c | 12 +++++-------
drivers/mmc/host/sdhci.h | 2 --
2 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index f517121..645785d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -707,7 +707,7 @@ static void sdhci_adma_mark_end(void *desc)
}
static void sdhci_adma_table_pre(struct sdhci_host *host,
- struct mmc_data *data, int sg_count)
+ struct mmc_data *data)
{
struct scatterlist *sg;
unsigned long flags;
@@ -721,14 +721,12 @@ static void sdhci_adma_table_pre(struct sdhci_host *host,
* We currently guess that it is LE.
*/
- host->sg_count = sg_count;
-
desc = host->adma_table;
align = host->align_buffer;
align_addr = host->align_addr;
- for_each_sg(data->sg, sg, host->sg_count, i) {
+ for_each_sg(data->sg, sg, data->sg_count, i) {
addr = sg_dma_address(sg);
len = sg_dma_len(sg);
@@ -800,7 +798,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
bool has_unaligned = false;
/* Do a quick scan of the SG list for any unaligned mappings */
- for_each_sg(data->sg, sg, host->sg_count, i)
+ for_each_sg(data->sg, sg, data->sg_count, i)
if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) {
has_unaligned = true;
break;
@@ -812,7 +810,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
align = host->align_buffer;
- for_each_sg(data->sg, sg, host->sg_count, i) {
+ for_each_sg(data->sg, sg, data->sg_count, i) {
if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) {
size = SDHCI_ADMA2_ALIGN -
(sg_dma_address(sg) & SDHCI_ADMA2_MASK);
@@ -1110,7 +1108,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
WARN_ON(1);
host->flags &= ~SDHCI_REQ_USE_DMA;
} else if (host->flags & SDHCI_USE_ADMA) {
- sdhci_adma_table_pre(host, data, sg_cnt);
+ sdhci_adma_table_pre(host, data);
sdhci_set_adma_addr(host, host->adma_addr);
} else {
WARN_ON(sg_cnt != 1);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index a5df807..7bbdd8a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -585,8 +585,6 @@ struct sdhci_host {
struct sg_mapping_iter sg_miter; /* SG state for PIO */
unsigned int blocks; /* remaining PIO blocks */
- int sg_count; /* Mapped sg entries */
-
void *adma_table; /* ADMA descriptor table */
void *align_buffer; /* Bounce buffer */
void *integr_table; /* ADMA3 intergrate descriptor table */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RFC PATCH 7/8] mmc: host: sdhci: Add MMC packed request support
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
` (5 preceding siblings ...)
2020-01-17 5:24 ` [RFC PATCH 6/8] mmc: host: sdhci: Remove redundant sg_count member of struct sdhci_host Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 8/8] mmc: host: sdhci-sprd: " Baolin Wang
7 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
This patch adds MMC packed operations to support packed requests,
and enables ADMA3 transfer mode to support this feature.
Enable ADMA3 transfer mode only for read and write commands, and
we will disable command interrupt and data timeout interrupt,
instead we will use software data timeout for ADMA3 fransfer mode.
For other non-data commands, we still use the ADMA2 transfer, since
no bebefits using ADMA3 transfer.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/mmc/host/sdhci.c | 316 ++++++++++++++++++++++++++++++++++++++++++++--
drivers/mmc/host/sdhci.h | 11 ++
2 files changed, 315 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 645785d..56a3fb5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -109,6 +109,19 @@ void sdhci_dumpregs(struct sdhci_host *host)
}
}
+ if (host->adma3_enabled) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ SDHCI_DUMP("ADMA3 Err: 0x%08x | ADMA3 Ptr: 0x%08x%08x\n",
+ sdhci_readl(host, SDHCI_ADMA_ERROR),
+ sdhci_readl(host, SDHCI_ADMA3_ADDRESS_HI),
+ sdhci_readl(host, SDHCI_ADMA3_ADDRESS));
+ } else {
+ SDHCI_DUMP("ADMA3 Err: 0x%08x | ADMA3 Ptr: 0x%08x\n",
+ sdhci_readl(host, SDHCI_ADMA_ERROR),
+ sdhci_readl(host, SDHCI_ADMA3_ADDRESS));
+ }
+ }
+
SDHCI_DUMP("============================================\n");
}
EXPORT_SYMBOL_GPL(sdhci_dumpregs);
@@ -286,7 +299,9 @@ static void sdhci_config_dma(struct sdhci_host *host)
goto out;
/* Note if DMA Select is zero then SDMA is selected */
- if (host->flags & SDHCI_USE_ADMA)
+ if (host->adma3_enabled)
+ ctrl |= SDHCI_CTRL_ADMA3;
+ else if (host->flags & SDHCI_USE_ADMA)
ctrl |= SDHCI_CTRL_ADMA32;
if (host->flags & SDHCI_USE_64_BIT_DMA) {
@@ -456,7 +471,7 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host)
static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
unsigned long timeout)
{
- if (sdhci_data_line_cmd(mrq->cmd))
+ if (host->prq || sdhci_data_line_cmd(mrq->cmd))
mod_timer(&host->data_timer, timeout);
else
mod_timer(&host->timer, timeout);
@@ -464,7 +479,7 @@ static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq)
{
- if (sdhci_data_line_cmd(mrq->cmd))
+ if (host->prq || sdhci_data_line_cmd(mrq->cmd))
del_timer(&host->data_timer);
else
del_timer(&host->timer);
@@ -721,10 +736,16 @@ static void sdhci_adma_table_pre(struct sdhci_host *host,
* We currently guess that it is LE.
*/
- desc = host->adma_table;
- align = host->align_buffer;
-
- align_addr = host->align_addr;
+ if (host->adma3_enabled) {
+ desc = host->adma3_pos;
+ align = host->adma3_align_pos;
+ align_addr = host->align_addr +
+ host->adma3_align_pos - host->align_buffer;
+ } else {
+ desc = host->adma_table;
+ align = host->align_buffer;
+ align_addr = host->align_addr;
+ }
for_each_sg(data->sg, sg, data->sg_count, i) {
addr = sg_dma_address(sg);
@@ -783,6 +804,11 @@ static void sdhci_adma_table_pre(struct sdhci_host *host,
/* Add a terminating entry - nop, end, valid */
__sdhci_adma_write_desc(host, &desc, 0, 0, ADMA2_NOP_END_VALID);
}
+
+ if (host->adma3_enabled) {
+ host->adma3_pos = desc;
+ host->adma3_align_pos = align;
+ }
}
static void sdhci_adma_table_post(struct sdhci_host *host,
@@ -808,7 +834,10 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
data->sg_len, DMA_FROM_DEVICE);
- align = host->align_buffer;
+ if (host->adma3_enabled)
+ align = host->adma3_align_pos;
+ else
+ align = host->align_buffer;
for_each_sg(data->sg, sg, data->sg_count, i) {
if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) {
@@ -822,6 +851,9 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
align += SDHCI_ADMA2_ALIGN;
}
}
+
+ if (host->adma3_enabled)
+ host->adma3_align_pos = align;
}
}
}
@@ -1030,13 +1062,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
host->data_timeout = 0;
- if (sdhci_data_line_cmd(cmd))
+ if (!host->prq && sdhci_data_line_cmd(cmd))
sdhci_set_timeout(host, cmd);
if (!data)
return;
- WARN_ON(host->data);
+ WARN_ON(!host->prq && host->data);
/* Sanity checks */
BUG_ON(data->blksz * data->blocks > 524288);
@@ -1109,7 +1141,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
host->flags &= ~SDHCI_REQ_USE_DMA;
} else if (host->flags & SDHCI_USE_ADMA) {
sdhci_adma_table_pre(host, data);
- sdhci_set_adma_addr(host, host->adma_addr);
+ if (!host->adma3_enabled)
+ sdhci_set_adma_addr(host, host->adma_addr);
} else {
WARN_ON(sg_cnt != 1);
sdhci_set_sdma_addr(host, sdhci_sdma_address(host));
@@ -1132,6 +1165,9 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
sdhci_set_transfer_irqs(host);
+ if (host->adma3_enabled)
+ return;
+
/* Set the DMA boundary value and block size */
sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
SDHCI_BLOCK_SIZE);
@@ -1289,6 +1325,36 @@ static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
queue_work(host->complete_wq, &host->complete_work);
}
+static void sdhci_finish_packed_data(struct sdhci_host *host, int error)
+{
+ struct mmc_request *mrq;
+
+ host->data = NULL;
+ /*
+ * Reset the align buffer pointer address for unaligned mappings after
+ * finishing the transfer.
+ */
+ host->adma3_align_pos = host->align_buffer;
+
+ if (error)
+ sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+
+ list_for_each_entry(mrq, &host->prq->list, list) {
+ struct mmc_data *data = mrq->data;
+
+ sdhci_adma_table_post(host, data);
+ data->error = error;
+
+ if (data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blksz * data->blocks;
+ }
+
+ sdhci_del_timer(host, NULL);
+ sdhci_led_deactivate(host);
+}
+
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_command *data_cmd = host->data_cmd;
@@ -1820,6 +1886,206 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
* *
\*****************************************************************************/
+static void sdhci_adma3_write_cmd_desc(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+ struct sdhci_adma3_cmd_desc *cmd_desc = host->adma3_pos;
+ int blksz, command;
+ u16 mode = 0;
+
+ /* Set block count */
+ cmd_desc->cmd = cpu_to_le32(ADMA3_TRAN_VALID);
+ cmd_desc->reg = cpu_to_le32(data->blocks);
+ cmd_desc++;
+
+ /* Set block size */
+ cmd_desc->cmd = cpu_to_le32(ADMA3_TRAN_VALID);
+ blksz = SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz);
+ cmd_desc->reg = cpu_to_le32(blksz);
+ cmd_desc++;
+
+ /* Set argument */
+ cmd_desc->cmd = cpu_to_le32(ADMA3_TRAN_VALID);
+ cmd_desc->reg = cpu_to_le32(cmd->arg);
+ cmd_desc++;
+
+ /* set command and transfer mode */
+ if (data->flags & MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+
+ if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE))
+ mode |= SDHCI_TRNS_BLK_CNT_EN;
+
+ if (mmc_op_multi(cmd->opcode) || data->blocks > 1)
+ mode |= SDHCI_TRNS_MULTI;
+
+ sdhci_auto_cmd_select(host, cmd, &mode);
+ mode |= SDHCI_TRNS_DMA;
+
+ command = sdhci_get_command(host, cmd);
+ command = (command << 16) | mode;
+ cmd_desc->cmd = cpu_to_le32(ADMA3_TRAN_END);
+ cmd_desc->reg = cpu_to_le32(command);
+
+ host->adma3_pos +=
+ SDHCI_ADMA3_CMD_DESC_SZ * SDHCI_ADMA3_CMD_DESC_ENTRIES;
+}
+
+static void sdhci_adma3_write_integr_desc(struct sdhci_host *host,
+ dma_addr_t addr)
+{
+ struct sdhci_integr_64_desc *integr_desc = host->integr_table;
+
+ integr_desc->cmd = cpu_to_le32(ADMA3_INTEGR_TRAN_END);
+ integr_desc->addr_lo = cpu_to_le32((u32)addr);
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ integr_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
+}
+
+static void sdhci_set_adma3_addr(struct sdhci_host *host, dma_addr_t addr)
+{
+ sdhci_writel(host, addr, SDHCI_ADMA3_ADDRESS);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ sdhci_writel(host, (u64)addr >> 32, SDHCI_ADMA3_ADDRESS_HI);
+}
+
+int sdhci_prepare_packed(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long timeout, flags;
+ u32 mask;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!(host->flags & SDHCI_USE_ADMA3) ||
+ !(host->flags & (SDHCI_AUTO_CMD23 | SDHCI_AUTO_CMD12))) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ pr_err("%s: Unsupported packed request\n",
+ mmc_hostname(host->mmc));
+ return -EOPNOTSUPP;
+ }
+
+ /* Wait max 10 ms */
+ timeout = 10;
+ mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT;
+
+ while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
+ if (timeout == 0) {
+ sdhci_dumpregs(host);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ pr_err("%s: Controller never released inhibit bit(s).\n",
+ mmc_hostname(host->mmc));
+ return -EIO;
+ }
+
+ timeout--;
+ mdelay(1);
+ }
+
+ /* Disable command complete event for ADMA3 mode */
+ host->ier &= ~SDHCI_INT_RESPONSE;
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+ /*
+ * Disable data timeout interrupt, and will use software timeout for
+ * packed request.
+ */
+ sdhci_set_data_timeout_irq(host, false);
+
+ /* Enable ADMA3 mode for packed request */
+ host->adma3_enabled = true;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return 0;
+}
+
+int sdhci_unprepare_packed(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Disable ADMA3 mode after finishing packed request */
+ host->adma3_enabled = false;
+
+ /* Re-enable command complete event after ADMA3 mode */
+ host->ier |= SDHCI_INT_RESPONSE;
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return 0;
+}
+
+int sdhci_packed_request(struct mmc_host *mmc,
+ struct mmc_packed_request *prq)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct mmc_request *mrq;
+ unsigned long timeout, flags;
+ u64 data_timeout = 0;
+ dma_addr_t integr_addr;
+ int present;
+
+ /* Firstly check card presence */
+ present = mmc->ops->get_cd(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ sdhci_led_activate(host);
+
+ if (!present || host->flags & SDHCI_DEVICE_DEAD) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return -ENOMEDIUM;
+ }
+
+ host->prq = prq;
+ host->adma3_pos = host->adma_table;
+ host->adma3_align_pos = host->align_buffer;
+ integr_addr = host->adma_addr;
+
+ list_for_each_entry(mrq, &prq->list, list) {
+ struct mmc_command *cmd = mrq->cmd;
+
+ /* Set command descriptor */
+ sdhci_adma3_write_cmd_desc(host, cmd);
+ /* Set ADMA2 descriptors */
+ sdhci_prepare_data(host, cmd);
+ /* Set integrated descriptor */
+ sdhci_adma3_write_integr_desc(host, integr_addr);
+
+ /* Update the integrated descriptor address */
+ integr_addr =
+ host->adma_addr + (host->adma3_pos - host->adma_table);
+
+ /* Calculate each command's data timeout */
+ sdhci_calc_sw_timeout(host, cmd);
+ data_timeout += host->data_timeout;
+ }
+
+ timeout = jiffies;
+ if (data_timeout)
+ timeout += nsecs_to_jiffies(data_timeout);
+ else
+ timeout += 10 * HZ * prq->nr_reqs;
+ sdhci_mod_timer(host, NULL, timeout);
+
+ /* Start ADMA3 transfer */
+ sdhci_set_adma3_addr(host, host->integr_addr);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_packed_request);
+
static void sdhci_start_request(struct mmc_host *mmc, struct mmc_request *mrq,
int present)
{
@@ -2661,9 +2927,19 @@ static bool sdhci_request_done(struct sdhci_host *host)
{
unsigned long flags;
struct mmc_request *mrq;
+ struct mmc_packed_request *prq;
int i;
spin_lock_irqsave(&host->lock, flags);
+ prq = host->prq;
+
+ if (prq) {
+ host->prq = NULL;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ host->ops->packed_request_done(host, prq);
+ return true;
+ }
for (i = 0; i < SDHCI_MAX_MRQS; i++) {
mrq = host->mrqs_done[i];
@@ -2808,6 +3084,17 @@ static void sdhci_timeout_data_timer(struct timer_list *t)
spin_lock_irqsave(&host->lock, flags);
+ if (host->prq) {
+ pr_err("%s: Packed requests timeout for hardware interrupt.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ sdhci_finish_packed_data(host, -ETIMEDOUT);
+ queue_work(host->complete_wq, &host->complete_work);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return;
+ }
+
if (host->data || host->data_cmd ||
(host->cmd && sdhci_data_line_cmd(host->cmd))) {
pr_err("%s: Timeout waiting for hardware interrupt.\n",
@@ -3015,7 +3302,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
host->ops->adma_workaround(host, intmask);
}
- if (host->data->error)
+ if (host->prq)
+ sdhci_finish_packed_data(host, host->data->error);
+ else if (host->data->error)
sdhci_finish_data(host);
else {
if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
@@ -3187,6 +3476,9 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
host->mrqs_done[i] = NULL;
}
}
+
+ if (host->prq)
+ result = IRQ_WAKE_THREAD;
out:
spin_unlock(&host->lock);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 7bbdd8a..5b9b521 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -575,6 +575,7 @@ struct sdhci_host {
bool irq_wake_enabled; /* IRQ wakeup is enabled */
bool v4_mode; /* Host Version 4 Enable */
bool always_defer_done; /* Always defer to complete requests */
+ bool adma3_enabled; /* ADMA3 mode enabled */
struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
struct mmc_command *cmd; /* Current command */
@@ -582,12 +583,15 @@ struct sdhci_host {
struct mmc_data *data; /* Current data request */
unsigned int data_early:1; /* Data finished before cmd */
+ struct mmc_packed_request *prq; /* Current packed request */
struct sg_mapping_iter sg_miter; /* SG state for PIO */
unsigned int blocks; /* remaining PIO blocks */
void *adma_table; /* ADMA descriptor table */
void *align_buffer; /* Bounce buffer */
void *integr_table; /* ADMA3 intergrate descriptor table */
+ void *adma3_pos; /* ADMA3 buffer position */
+ void *adma3_align_pos; /* ADMA3 Bounce buffer position */
size_t adma_table_sz; /* ADMA descriptor table size */
size_t align_buffer_sz; /* Bounce buffer size */
@@ -693,6 +697,8 @@ struct sdhci_ops {
dma_addr_t addr, int len, unsigned int cmd);
void (*request_done)(struct sdhci_host *host,
struct mmc_request *mrq);
+ void (*packed_request_done)(struct sdhci_host *host,
+ struct mmc_packed_request *prq);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
@@ -844,4 +850,9 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
void sdhci_send_tuning(struct sdhci_host *host, u32 opcode);
void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode);
+int sdhci_prepare_packed(struct mmc_host *mmc);
+int sdhci_unprepare_packed(struct mmc_host *mmc);
+int sdhci_packed_request(struct mmc_host *mmc,
+ struct mmc_packed_request *prq);
+
#endif /* __SDHCI_HW_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RFC PATCH 8/8] mmc: host: sdhci-sprd: Add MMC packed request support
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
` (6 preceding siblings ...)
2020-01-17 5:24 ` [RFC PATCH 7/8] mmc: host: sdhci: Add MMC packed request support Baolin Wang
@ 2020-01-17 5:24 ` Baolin Wang
7 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-01-17 5:24 UTC (permalink / raw)
To: axboe, paolo.valente, adrian.hunter, ulf.hansson
Cc: zhang.lyra, orsonzhai, arnd, linus.walleij, baolin.wang7,
linux-mmc, linux-kernel, linux-block
Enable the ADMA3 transfer mode as well as adding packed operations
to support MMC packed requests to improve IO performance.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/mmc/host/sdhci-sprd.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 49afe1c..daa38ed 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -390,6 +390,12 @@ static void sdhci_sprd_request_done(struct sdhci_host *host,
mmc_request_done(host->mmc, mrq);
}
+static void sdhci_sprd_packed_request_done(struct sdhci_host *host,
+ struct mmc_packed_request *prq)
+{
+ mmc_hsq_finalize_packed_request(host->mmc, prq);
+}
+
static struct sdhci_ops sdhci_sprd_ops = {
.read_l = sdhci_sprd_readl,
.write_l = sdhci_sprd_writel,
@@ -404,6 +410,7 @@ static void sdhci_sprd_request_done(struct sdhci_host *host,
.get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
.get_ro = sdhci_sprd_get_ro,
.request_done = sdhci_sprd_request_done,
+ .packed_request_done = sdhci_sprd_packed_request_done,
};
static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
@@ -546,10 +553,18 @@ static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host,
SDHCI_QUIRK_MISSING_CAPS,
.quirks2 = SDHCI_QUIRK2_BROKEN_HS200 |
SDHCI_QUIRK2_USE_32BIT_BLK_CNT |
- SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_USE_ADMA3_SUPPORT,
.ops = &sdhci_sprd_ops,
};
+static const struct hsq_packed_ops packed_ops = {
+ .packed_algo = mmc_hsq_packed_algo_rw,
+ .prepare_hardware = sdhci_prepare_packed,
+ .unprepare_hardware = sdhci_unprepare_packed,
+ .packed_request = sdhci_packed_request,
+};
+
static int sdhci_sprd_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
@@ -676,7 +691,18 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
goto err_cleanup_host;
}
- ret = mmc_hsq_init(hsq, host->mmc, NULL, 0);
+ /*
+ * If the host controller can support ADMA3 mode, we can enable the
+ * packed request mode to improve the read/write performance.
+ *
+ * Considering the maximum ADMA3 entries (default is 16) and the request
+ * latency, we set the default maximum packed requests number is 8.
+ */
+ if (host->flags & SDHCI_USE_ADMA3)
+ ret = mmc_hsq_init(hsq, host->mmc, &packed_ops,
+ SDHCI_MAX_ADMA3_ENTRIES / 2);
+ else
+ ret = mmc_hsq_init(hsq, host->mmc, NULL, 0);
if (ret)
goto err_cleanup_host;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [RFC PATCH 1/8] block: Change the dispatch_request() API to support batch requests
2020-01-17 5:24 ` [RFC PATCH 1/8] block: Change the dispatch_request() API to support batch requests Baolin Wang
@ 2020-02-10 9:21 ` Baolin Wang
0 siblings, 0 replies; 10+ messages in thread
From: Baolin Wang @ 2020-02-10 9:21 UTC (permalink / raw)
To: axboe, Paolo Valente, Adrian Hunter, Ulf Hansson
Cc: Chunyan Zhang, Orson Zhai, Arnd Bergmann, Linus Walleij,
linux-mmc, LKML, linux-block
Hi Jens and Paolo,
On Fri, Jan 17, 2020 at 1:25 PM Baolin Wang <baolin.wang7@gmail.com> wrote:
>
> Now some SD/MMC host controllers can support packed command or packed request,
> that means we can package several requests to host controller at one time
> to improve performence.
>
> But the blk-mq always takes one request from the scheduler and dispatch it to
> the device, regardless of the driver or the scheduler, so there should only
> ever be one request in the local list in blk_mq_dispatch_rq_list(), that means
> the bd.last is always true and the driver can not use bd.last to decide if
> there are requests are pending now in hardware queue to help to package
> requests.
>
> Thus this is a preparation patch, which tries to change the dispatch_request()
> API to allow dispatching more than one request from the scheduler.
Do you have any comments for patch 1 and patch 2 in this patch set? Thanks.
> Suggested-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
> ---
> block/bfq-iosched.c | 12 +++++++++---
> block/blk-mq-sched.c | 15 ++++-----------
> block/kyber-iosched.c | 20 +++++++++++++-------
> block/mq-deadline.c | 12 +++++++++---
> include/linux/elevator.h | 2 +-
> 5 files changed, 36 insertions(+), 25 deletions(-)
>
> diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
> index ad4af4a..decabc4 100644
> --- a/block/bfq-iosched.c
> +++ b/block/bfq-iosched.c
> @@ -4774,7 +4774,8 @@ static inline void bfq_update_dispatch_stats(struct request_queue *q,
> bool idle_timer_disabled) {}
> #endif /* CONFIG_BFQ_CGROUP_DEBUG */
>
> -static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
> +static int bfq_dispatch_requests(struct blk_mq_hw_ctx *hctx,
> + struct list_head *list)
> {
> struct bfq_data *bfqd = hctx->queue->elevator->elevator_data;
> struct request *rq;
> @@ -4796,7 +4797,12 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
> bfq_update_dispatch_stats(hctx->queue, rq, in_serv_queue,
> idle_timer_disabled);
>
> - return rq;
> + if (!rq)
> + return 0;
> +
> + list_add(&rq->queuelist, list);
> +
> + return 1;
> }
>
> /*
> @@ -6772,7 +6778,7 @@ static ssize_t bfq_low_latency_store(struct elevator_queue *e,
> .finish_request = bfq_finish_requeue_request,
> .exit_icq = bfq_exit_icq,
> .insert_requests = bfq_insert_requests,
> - .dispatch_request = bfq_dispatch_request,
> + .dispatch_requests = bfq_dispatch_requests,
> .next_request = elv_rb_latter_request,
> .former_request = elv_rb_former_request,
> .allow_merge = bfq_allow_bio_merge,
> diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
> index ca22afd..f49f9d9 100644
> --- a/block/blk-mq-sched.c
> +++ b/block/blk-mq-sched.c
> @@ -90,28 +90,21 @@ static void blk_mq_do_dispatch_sched(struct blk_mq_hw_ctx *hctx)
> struct request_queue *q = hctx->queue;
> struct elevator_queue *e = q->elevator;
> LIST_HEAD(rq_list);
> + int ret;
>
> do {
> - struct request *rq;
> -
> if (e->type->ops.has_work && !e->type->ops.has_work(hctx))
> break;
>
> if (!blk_mq_get_dispatch_budget(hctx))
> break;
>
> - rq = e->type->ops.dispatch_request(hctx);
> - if (!rq) {
> + ret = e->type->ops.dispatch_requests(hctx, &rq_list);
> + if (ret == 0) {
> blk_mq_put_dispatch_budget(hctx);
> break;
> }
>
> - /*
> - * Now this rq owns the budget which has to be released
> - * if this rq won't be queued to driver via .queue_rq()
> - * in blk_mq_dispatch_rq_list().
> - */
> - list_add(&rq->queuelist, &rq_list);
> } while (blk_mq_dispatch_rq_list(q, &rq_list, true));
> }
>
> @@ -171,7 +164,7 @@ void blk_mq_sched_dispatch_requests(struct blk_mq_hw_ctx *hctx)
> {
> struct request_queue *q = hctx->queue;
> struct elevator_queue *e = q->elevator;
> - const bool has_sched_dispatch = e && e->type->ops.dispatch_request;
> + const bool has_sched_dispatch = e && e->type->ops.dispatch_requests;
> LIST_HEAD(rq_list);
>
> /* RCU or SRCU read lock is needed before checking quiesced flag */
> diff --git a/block/kyber-iosched.c b/block/kyber-iosched.c
> index 34dcea0..8f58434 100644
> --- a/block/kyber-iosched.c
> +++ b/block/kyber-iosched.c
> @@ -796,12 +796,13 @@ static int kyber_get_domain_token(struct kyber_queue_data *kqd,
> return NULL;
> }
>
> -static struct request *kyber_dispatch_request(struct blk_mq_hw_ctx *hctx)
> +static int kyber_dispatch_requests(struct blk_mq_hw_ctx *hctx,
> + struct list_head *list)
> {
> struct kyber_queue_data *kqd = hctx->queue->elevator->elevator_data;
> struct kyber_hctx_data *khd = hctx->sched_data;
> struct request *rq;
> - int i;
> + int i, ret = 0;
>
> spin_lock(&khd->lock);
>
> @@ -811,8 +812,11 @@ static struct request *kyber_dispatch_request(struct blk_mq_hw_ctx *hctx)
> */
> if (khd->batching < kyber_batch_size[khd->cur_domain]) {
> rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
> - if (rq)
> + if (rq) {
> + list_add(&rq->queuelist, list);
> + ret = 1;
> goto out;
> + }
> }
>
> /*
> @@ -832,14 +836,16 @@ static struct request *kyber_dispatch_request(struct blk_mq_hw_ctx *hctx)
> khd->cur_domain++;
>
> rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
> - if (rq)
> + if (rq) {
> + list_add(&rq->queuelist, list);
> + ret = 1;
> goto out;
> + }
> }
>
> - rq = NULL;
> out:
> spin_unlock(&khd->lock);
> - return rq;
> + return ret;
> }
>
> static bool kyber_has_work(struct blk_mq_hw_ctx *hctx)
> @@ -1020,7 +1026,7 @@ static int kyber_batching_show(void *data, struct seq_file *m)
> .finish_request = kyber_finish_request,
> .requeue_request = kyber_finish_request,
> .completed_request = kyber_completed_request,
> - .dispatch_request = kyber_dispatch_request,
> + .dispatch_requests = kyber_dispatch_requests,
> .has_work = kyber_has_work,
> },
> #ifdef CONFIG_BLK_DEBUG_FS
> diff --git a/block/mq-deadline.c b/block/mq-deadline.c
> index b490f47..9fbffba 100644
> --- a/block/mq-deadline.c
> +++ b/block/mq-deadline.c
> @@ -378,7 +378,8 @@ static struct request *__dd_dispatch_request(struct deadline_data *dd)
> * different hardware queue. This is because mq-deadline has shared
> * state for all hardware queues, in terms of sorting, FIFOs, etc.
> */
> -static struct request *dd_dispatch_request(struct blk_mq_hw_ctx *hctx)
> +static int dd_dispatch_requests(struct blk_mq_hw_ctx *hctx,
> + struct list_head *list)
> {
> struct deadline_data *dd = hctx->queue->elevator->elevator_data;
> struct request *rq;
> @@ -387,7 +388,12 @@ static struct request *dd_dispatch_request(struct blk_mq_hw_ctx *hctx)
> rq = __dd_dispatch_request(dd);
> spin_unlock(&dd->lock);
>
> - return rq;
> + if (!rq)
> + return 0;
> +
> + list_add(&rq->queuelist, list);
> +
> + return 1;
> }
>
> static void dd_exit_queue(struct elevator_queue *e)
> @@ -774,7 +780,7 @@ static void deadline_dispatch_stop(struct seq_file *m, void *v)
> static struct elevator_type mq_deadline = {
> .ops = {
> .insert_requests = dd_insert_requests,
> - .dispatch_request = dd_dispatch_request,
> + .dispatch_requests = dd_dispatch_requests,
> .prepare_request = dd_prepare_request,
> .finish_request = dd_finish_request,
> .next_request = elv_rb_latter_request,
> diff --git a/include/linux/elevator.h b/include/linux/elevator.h
> index 901bda3..a65bf5d 100644
> --- a/include/linux/elevator.h
> +++ b/include/linux/elevator.h
> @@ -42,7 +42,7 @@ struct elevator_mq_ops {
> void (*prepare_request)(struct request *, struct bio *bio);
> void (*finish_request)(struct request *);
> void (*insert_requests)(struct blk_mq_hw_ctx *, struct list_head *, bool);
> - struct request *(*dispatch_request)(struct blk_mq_hw_ctx *);
> + int (*dispatch_requests)(struct blk_mq_hw_ctx *, struct list_head *);
> bool (*has_work)(struct blk_mq_hw_ctx *);
> void (*completed_request)(struct request *, u64);
> void (*requeue_request)(struct request *);
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-02-10 9:22 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-17 5:24 [RFC PATCH 0/8] Add MMC packed request support Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 1/8] block: Change the dispatch_request() API to support batch requests Baolin Wang
2020-02-10 9:21 ` Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 2/8] block: Allow sending a batch of requests from the scheduler to hardware Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 3/8] mmc: Add MMC packed request support for MMC software queue Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 4/8] mmc: host: sdhci: Introduce ADMA3 transfer mode Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 5/8] mmc: host: sdhci: Factor out the command configuration Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 6/8] mmc: host: sdhci: Remove redundant sg_count member of struct sdhci_host Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 7/8] mmc: host: sdhci: Add MMC packed request support Baolin Wang
2020-01-17 5:24 ` [RFC PATCH 8/8] mmc: host: sdhci-sprd: " Baolin Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).