From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: linux-mmc@vger.kernel.org
Cc: Chris Ball <chris@printf.net>,
Ulf Hansson <ulf.hansson@linaro.org>,
Ben Dooks <ben-linux@fluff.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>
Subject: [PATCH] MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
Date: Thu, 04 Dec 2014 02:12:01 +0100 [thread overview]
Message-ID: <14058791.TAS1lQ00cW@vostro.rjw.lan> (raw)
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/misc/.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) which is only in linux-next at the moment (via the
linux-pm tree).
Please let me know if it is OK to take this one into linux-pm.
---
drivers/mmc/core/bus.c | 4 ++--
drivers/mmc/host/sdhci-acpi.c | 2 +-
drivers/mmc/host/sdhci-esdhc-imx.c | 4 ++--
drivers/mmc/host/sdhci-pci.c | 18 +++++++-----------
drivers/mmc/host/sdhci-pxav3.c | 2 +-
drivers/mmc/host/sdhci-s3c.c | 6 +++---
drivers/mmc/host/sdhci.c | 7 ++-----
drivers/mmc/host/sdhci.h | 3 ---
8 files changed, 18 insertions(+), 28 deletions(-)
Index: linux-pm/drivers/mmc/core/bus.c
===================================================================
--- linux-pm.orig/drivers/mmc/core/bus.c
+++ linux-pm/drivers/mmc/core/bus.c
@@ -179,7 +179,7 @@ static int mmc_bus_resume(struct device
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int mmc_runtime_suspend(struct device *dev)
{
struct mmc_card *card = mmc_dev_to_card(dev);
@@ -195,7 +195,7 @@ static int mmc_runtime_resume(struct dev
return host->bus_ops->runtime_resume(host);
}
-#endif /* !CONFIG_PM_RUNTIME */
+#endif /* !CONFIG_PM */
static const struct dev_pm_ops mmc_bus_pm_ops = {
SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, NULL)
Index: linux-pm/drivers/mmc/host/sdhci-acpi.c
===================================================================
--- linux-pm.orig/drivers/mmc/host/sdhci-acpi.c
+++ linux-pm/drivers/mmc/host/sdhci-acpi.c
@@ -416,7 +416,7 @@ static int sdhci_acpi_resume(struct devi
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_acpi_runtime_suspend(struct device *dev)
{
Index: linux-pm/drivers/mmc/host/sdhci-esdhc-imx.c
===================================================================
--- linux-pm.orig/drivers/mmc/host/sdhci-esdhc-imx.c
+++ linux-pm/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1172,7 +1172,7 @@ static int sdhci_esdhc_imx_remove(struct
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- if (!IS_ENABLED(CONFIG_PM_RUNTIME)) {
+ if (!IS_ENABLED(CONFIG_PM)) {
clk_disable_unprepare(imx_data->clk_per);
clk_disable_unprepare(imx_data->clk_ipg);
clk_disable_unprepare(imx_data->clk_ahb);
@@ -1183,7 +1183,7 @@ static int sdhci_esdhc_imx_remove(struct
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_esdhc_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
Index: linux-pm/drivers/mmc/host/sdhci-pci.c
===================================================================
--- linux-pm.orig/drivers/mmc/host/sdhci-pci.c
+++ linux-pm/drivers/mmc/host/sdhci-pci.c
@@ -134,7 +134,7 @@ static int pch_hc_probe_slot(struct sdhc
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static irqreturn_t sdhci_pci_sd_cd(int irq, void *dev_id)
{
@@ -1230,15 +1230,6 @@ static int sdhci_pci_resume(struct devic
return 0;
}
-#else /* CONFIG_PM */
-
-#define sdhci_pci_suspend NULL
-#define sdhci_pci_resume NULL
-
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
-
static int sdhci_pci_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
@@ -1310,7 +1301,12 @@ static int sdhci_pci_runtime_idle(struct
return 0;
}
-#endif
+#else /* CONFIG_PM */
+
+#define sdhci_pci_suspend NULL
+#define sdhci_pci_resume NULL
+
+#endif /* CONFIG_PM */
static const struct dev_pm_ops sdhci_pci_pm_ops = {
.suspend = sdhci_pci_suspend,
Index: linux-pm/drivers/mmc/host/sdhci-pxav3.c
===================================================================
--- linux-pm.orig/drivers/mmc/host/sdhci-pxav3.c
+++ linux-pm/drivers/mmc/host/sdhci-pxav3.c
@@ -436,7 +436,7 @@ static int sdhci_pxav3_resume(struct dev
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_pxav3_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
Index: linux-pm/drivers/mmc/host/sdhci-s3c.c
===================================================================
--- linux-pm.orig/drivers/mmc/host/sdhci-s3c.c
+++ linux-pm/drivers/mmc/host/sdhci-s3c.c
@@ -609,7 +609,7 @@ static int sdhci_s3c_probe(struct platfo
goto err_req_regs;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
clk_disable_unprepare(sc->clk_io);
#endif
@@ -635,7 +635,7 @@ static int sdhci_s3c_remove(struct platf
if (sc->ext_cd_irq)
free_irq(sc->ext_cd_irq, sc);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
clk_prepare_enable(sc->clk_io);
#endif
@@ -667,7 +667,7 @@ static int sdhci_s3c_resume(struct devic
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_s3c_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
Index: linux-pm/drivers/mmc/host/sdhci.c
===================================================================
--- linux-pm.orig/drivers/mmc/host/sdhci.c
+++ linux-pm/drivers/mmc/host/sdhci.c
@@ -56,7 +56,7 @@ static int sdhci_execute_tuning(struct m
static void sdhci_tuning_timer(unsigned long data);
static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_runtime_pm_get(struct sdhci_host *host);
static int sdhci_runtime_pm_put(struct sdhci_host *host);
static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
@@ -2654,9 +2654,6 @@ int sdhci_resume_host(struct sdhci_host
}
EXPORT_SYMBOL_GPL(sdhci_resume_host);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
static int sdhci_runtime_pm_get(struct sdhci_host *host)
{
@@ -2757,7 +2754,7 @@ int sdhci_runtime_resume_host(struct sdh
}
EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
-#endif
+#endif /* CONFIG_PM */
/*****************************************************************************\
* *
Index: linux-pm/drivers/mmc/host/sdhci.h
===================================================================
--- linux-pm.orig/drivers/mmc/host/sdhci.h
+++ linux-pm/drivers/mmc/host/sdhci.h
@@ -411,9 +411,6 @@ void sdhci_set_uhs_signaling(struct sdhc
extern int sdhci_suspend_host(struct sdhci_host *host);
extern int sdhci_resume_host(struct sdhci_host *host);
extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
extern int sdhci_runtime_resume_host(struct sdhci_host *host);
#endif
next reply other threads:[~2014-12-04 1:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 1:12 Rafael J. Wysocki [this message]
2014-12-04 10:12 ` [PATCH] MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=14058791.TAS1lQ00cW@vostro.rjw.lan \
--to=rjw@rjwysocki.net \
--cc=ben-linux@fluff.org \
--cc=chris@printf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).