From: Manish Narani <manish.narani@xilinx.com>
To: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
adrian.hunter@intel.com, michal.simek@xilinx.com,
jolly.shah@xilinx.com, rajan.vaja@xilinx.com,
nava.manne@xilinx.com, mdf@kernel.org, manish.narani@xilinx.com
Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, git@xilinx.com
Subject: [PATCH v6 5/8] mmc: sdhci-of-arasan: Add support to set clock phase delays for SD
Date: Wed, 20 Nov 2019 12:17:26 +0530 [thread overview]
Message-ID: <1574232449-13570-6-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1574232449-13570-1-git-send-email-manish.narani@xilinx.com>
Add support to read Clock Phase Delays from the DT and set it via
clk_set_phase() API from clock framework. Some of the controllers might
have their own handling of setting clock delays, for this keep the
set_clk_delays as function pointer which can be assigned controller
specific handling of the same.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/mmc/host/sdhci-of-arasan.c | 92 ++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index b75ba780f902..9452ae01f6fa 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -77,12 +77,18 @@ struct sdhci_arasan_soc_ctl_map {
* @sdcardclk: Pointer to normal 'struct clock' for sdcardclk_hw.
* @sampleclk_hw: Struct for the clock we might provide to a PHY.
* @sampleclk: Pointer to normal 'struct clock' for sampleclk_hw.
+ * @clk_phase_in: Array of Input Clock Phase Delays for all speed modes
+ * @clk_phase_out: Array of Output Clock Phase Delays for all speed modes
+ * @set_clk_delays: Function pointer for setting Clock Delays
*/
struct sdhci_arasan_clk_data {
struct clk_hw sdcardclk_hw;
struct clk *sdcardclk;
struct clk_hw sampleclk_hw;
struct clk *sampleclk;
+ int clk_phase_in[MMC_TIMING_MMC_HS400 + 1];
+ int clk_phase_out[MMC_TIMING_MMC_HS400 + 1];
+ void (*set_clk_delays)(struct sdhci_host *host);
};
/**
@@ -186,6 +192,7 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+ struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
bool ctrl_phy = false;
if (!IS_ERR(sdhci_arasan->phy)) {
@@ -227,6 +234,10 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_arasan->is_phy_on = false;
}
+ /* Set the Input and Output Clock Phase Delays */
+ if (clk_data->set_clk_delays)
+ clk_data->set_clk_delays(host);
+
sdhci_set_clock(host, clock);
if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE)
@@ -650,6 +661,85 @@ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
sdhci_arasan_syscon_write(host, &soc_ctl_map->baseclkfreq, mhz);
}
+static void sdhci_arasan_set_clk_delays(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+ struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
+
+ clk_set_phase(clk_data->sampleclk,
+ clk_data->clk_phase_in[host->timing]);
+ clk_set_phase(clk_data->sdcardclk,
+ clk_data->clk_phase_out[host->timing]);
+}
+
+static void arasan_dt_read_clk_phase(struct device *dev,
+ struct sdhci_arasan_clk_data *clk_data,
+ unsigned int timing, const char *prop)
+{
+ struct device_node *np = dev->of_node;
+
+ int clk_phase[2] = {0};
+
+ /*
+ * Read Tap Delay values from DT, if the DT does not contain the
+ * Tap Values then use the pre-defined values.
+ */
+ if (of_property_read_variable_u32_array(np, prop, &clk_phase[0],
+ 2, 0)) {
+ dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n",
+ prop, clk_data->clk_phase_in[timing],
+ clk_data->clk_phase_out[timing]);
+ return;
+ }
+
+ /* The values read are Input and Output Clock Delays in order */
+ clk_data->clk_phase_in[timing] = clk_phase[0];
+ clk_data->clk_phase_out[timing] = clk_phase[1];
+}
+
+/**
+ * arasan_dt_parse_clk_phases - Read Clock Delay values from DT
+ *
+ * Called at initialization to parse the values of Clock Delays.
+ *
+ * @dev: Pointer to our struct device.
+ * @clk_data: Pointer to the Clock Data structure
+ */
+static void arasan_dt_parse_clk_phases(struct device *dev,
+ struct sdhci_arasan_clk_data *clk_data)
+{
+ /*
+ * This has been kept as a pointer and is assigned a function here.
+ * So that different controller variants can assign their own handling
+ * function.
+ */
+ clk_data->set_clk_delays = sdhci_arasan_set_clk_delays;
+
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY,
+ "clk-phase-legacy");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS,
+ "clk-phase-mmc-hs");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_SD_HS,
+ "clk-phase-sd-hs");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR12,
+ "clk-phase-uhs-sdr12");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR25,
+ "clk-phase-uhs-sdr25");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR50,
+ "clk-phase-uhs-sdr50");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR104,
+ "clk-phase-uhs-sdr104");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_DDR50,
+ "clk-phase-uhs-ddr50");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_DDR52,
+ "clk-phase-mmc-ddr52");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS200,
+ "clk-phase-mmc-hs200");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS400,
+ "clk-phase-mmc-hs400");
+}
+
/**
* sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
*
@@ -942,6 +1032,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
if (ret)
goto clk_disable_all;
+ arasan_dt_parse_clk_phases(&pdev->dev, &sdhci_arasan->clk_data);
+
ret = mmc_of_parse(host->mmc);
if (ret) {
if (ret != -EPROBE_DEFER)
--
2.17.1
next prev parent reply other threads:[~2019-11-20 6:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 6:47 [PATCH v6 0/8] Arasan SDHCI enhancements and ZynqMP Tap Delays Handling Manish Narani
2019-11-20 6:47 ` [PATCH v6 1/8] mmc: sdhci-of-arasan: Separate out clk related data to another structure Manish Narani
2019-11-20 6:47 ` [PATCH v6 2/8] dt-bindings: mmc: arasan: Update Documentation for the input clock Manish Narani
2019-11-20 6:47 ` [PATCH v6 3/8] mmc: sdhci-of-arasan: Add sampling clock for a phy to use Manish Narani
2019-11-20 6:47 ` [PATCH v6 4/8] dt-bindings: mmc: Add optional generic properties for mmc Manish Narani
2019-11-21 19:01 ` Rob Herring
2019-11-22 6:53 ` Ulf Hansson
2019-11-20 6:47 ` Manish Narani [this message]
2019-11-20 6:47 ` [PATCH v6 6/8] firmware: xilinx: Add SDIO Tap Delay nodes Manish Narani
2019-11-20 6:47 ` [PATCH v6 7/8] dt-bindings: mmc: arasan: Document 'xlnx, zynqmp-8.9a' controller Manish Narani
2019-11-20 6:47 ` [PATCH v6 8/8] mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup Manish Narani
2019-11-20 12:59 ` [PATCH v6 0/8] Arasan SDHCI enhancements and ZynqMP Tap Delays Handling Ulf Hansson
2019-11-21 7:08 ` Manish Narani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574232449-13570-6-git-send-email-manish.narani@xilinx.com \
--to=manish.narani@xilinx.com \
--cc=adrian.hunter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=jolly.shah@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mdf@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=nava.manne@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).