linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ming Lei <ming.lei@redhat.com>,
	Naresh Kamboju <naresh.kamboju@linaro.org>,
	Christoph Hellwig <hch@lst.de>, Faiz Abbas <faiz_abbas@ti.com>,
	linux-block@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-mmc@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 196/219] mmc: core: align max segment size with logical block size
Date: Fri, 22 Nov 2019 00:48:48 -0500	[thread overview]
Message-ID: <20191122054911.1750-189-sashal@kernel.org> (raw)
In-Reply-To: <20191122054911.1750-1-sashal@kernel.org>

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit c53336c8f5f29043fded57912cc06c24e12613d7 ]

Logical block size is the lowest possible block size that the storage
device can address. Max segment size is often related with controller's
DMA capability. And it is reasonable to align max segment size with
logical block size.

SDHCI sets un-aligned max segment size, and causes ADMA error, so
fix it by aligning max segment size with logical block size.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/block.c | 6 ------
 drivers/mmc/core/queue.c | 9 ++++++++-
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index eee004fb3c3e3..527ab15c421f9 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -2384,12 +2384,6 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	snprintf(md->disk->disk_name, sizeof(md->disk->disk_name),
 		 "mmcblk%u%s", card->host->index, subname ? subname : "");
 
-	if (mmc_card_mmc(card))
-		blk_queue_logical_block_size(md->queue.queue,
-					     card->ext_csd.data_sector_size);
-	else
-		blk_queue_logical_block_size(md->queue.queue, 512);
-
 	set_capacity(md->disk, size);
 
 	if (mmc_host_cmd23(card->host)) {
diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index 18aae28845ec9..becc6594a8a47 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -355,6 +355,7 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
 	u64 limit = BLK_BOUNCE_HIGH;
+	unsigned block_size = 512;
 
 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
 		limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
@@ -368,7 +369,13 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
 	blk_queue_max_hw_sectors(mq->queue,
 		min(host->max_blk_count, host->max_req_size / 512));
 	blk_queue_max_segments(mq->queue, host->max_segs);
-	blk_queue_max_segment_size(mq->queue, host->max_seg_size);
+
+	if (mmc_card_mmc(card))
+		block_size = card->ext_csd.data_sector_size;
+
+	blk_queue_logical_block_size(mq->queue, block_size);
+	blk_queue_max_segment_size(mq->queue,
+			round_down(host->max_seg_size, block_size));
 
 	INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
 	INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);
-- 
2.20.1

      parent reply	other threads:[~2019-11-22  5:48 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191122054911.1750-1-sashal@kernel.org>
2019-11-22  5:46 ` [PATCH AUTOSEL 4.19 068/219] mmc: meson-gx: make sure the descriptor is stopped on errors Sasha Levin
2019-11-22  5:48 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191122054911.1750-189-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=faiz_abbas@ti.com \
    --cc=hch@lst.de \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ming.lei@redhat.com \
    --cc=naresh.kamboju@linaro.org \
    --cc=stable@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).