[PATCH v2 06/14] mmc: sdhci-esdhc-imx: add strobe-dll-delay-target support

[BOUGH CHEN <haibo.chen@nxp.com>]

strobe-dll-delay-target is the delay cell add on the strobe line.
Strobe line the the uSDHC loopback read clock which is use in HS400
mode. Different strobe-dll-delay-target may need to set for different
board/SoC. If this delay cell is not set to an appropriate value,
we may see some read operation meet CRC error after HS400 mode select
which already pass the tuning.

This patch add the strobe-dll-delay-target setting in driver, so that
user can easily config this delay cell in dts file.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c          | 12 +++++++++++-
 include/linux/platform_data/mmc-esdhc-imx.h |  1 +
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 0cce4d97f0a5..4b19ac0039f6 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -73,6 +73,7 @@
 #define ESDHC_STROBE_DLL_CTRL		0x70
 #define ESDHC_STROBE_DLL_CTRL_ENABLE	(1 << 0)
 #define ESDHC_STROBE_DLL_CTRL_RESET	(1 << 1)
+#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT	0x7
 #define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT	3
 #define ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT	(4 << 20)
 
@@ -995,6 +996,9 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
  */
 static void esdhc_set_strobe_dll(struct sdhci_host *host)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	u32 strobe_delay;
 	u32 v;
 
 	/* disable clock before enabling strobe dll */
@@ -1012,9 +1016,13 @@ static void esdhc_set_strobe_dll(struct sdhci_host *host)
 	 * enable strobe dll ctrl and adjust the delay target
 	 * for the uSDHC loopback read clock
 	 */
+	if (imx_data->boarddata.strobe_dll_delay_target)
+		strobe_delay = imx_data->boarddata.strobe_dll_delay_target;
+	else
+		strobe_delay = ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT;
 	v = ESDHC_STROBE_DLL_CTRL_ENABLE |
 		ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT |
-		(7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
+		(strobe_delay << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
 	writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL);
 	/* wait 5us to make sure strobe dll status register stable */
 	udelay(5);
@@ -1340,6 +1348,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 	of_property_read_u32(np, "fsl,tuning-start-tap",
 			     &boarddata->tuning_start_tap);
 
+	of_property_read_u32(np, "fsl,strobe-dll-delay-target",
+				&boarddata->strobe_dll_delay_target);
 	if (of_find_property(np, "no-1-8-v", NULL))
 		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
index 6c006078c8a1..0434f68eda86 100644
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -37,5 +37,6 @@ struct esdhc_platform_data {
 	unsigned int delay_line;
 	unsigned int tuning_step;       /* The delay cell steps in tuning procedure */
 	unsigned int tuning_start_tap;	/* The start delay cell point in tuning procedure */
+	unsigned int strobe_dll_delay_target;	/* The delay cell for strobe pad (read clock) */
 };
 #endif /* __ASM_ARCH_IMX_ESDHC_H */
-- 
2.17.1