Linux-mmc Archive on lore.kernel.org
 help / color / Atom feed
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-mmc@vger.kernel.org>
Cc: <adrian.hunter@intel.com>, <kishon@ti.com>,
	<mark.rutland@arm.com>, <robh+dt@kernel.org>,
	<ulf.hansson@linaro.org>, <faiz_abbas@ti.com>, <tony@atomide.com>
Subject: [PATCH v5 04/10] mmc: sdhci-omap: Add using external dma
Date: Thu, 16 Jan 2020 16:21:48 +0530
Message-ID: <20200116105154.7685-5-faiz_abbas@ti.com> (raw)
In-Reply-To: <20200116105154.7685-1-faiz_abbas@ti.com>

From: Chunyan Zhang <zhang.chunyan@linaro.org>

sdhci-omap can support both external dma controller via dmaengine framework
as well as ADMA which standard SD host controller provides.

Fixes by Faiz Abbas <fazi_abbas@ti.com>:
1. Switch to DMA slave mode when using external DMA
2. Add offset to mapbase

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/Kconfig      |  1 +
 drivers/mmc/host/sdhci-omap.c | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index adef971582a1..2c0d90b9383e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -1010,6 +1010,7 @@ config MMC_SDHCI_OMAP
 	depends on MMC_SDHCI_PLTFM && OF
 	select THERMAL
 	imply TI_SOC_THERMAL
+	select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's DRA7 SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 083e7e053c95..84d85aa743da 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -685,7 +685,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host)
 	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
 
 	reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
-	reg |= CON_DMA_MASTER;
+	reg &= ~CON_DMA_MASTER;
+	/* Switch to DMA slave mode when using external DMA */
+	if (!host->use_external_dma)
+		reg |= CON_DMA_MASTER;
+
 	sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
 
 	return 0;
@@ -1037,6 +1041,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct sdhci_omap_data *data;
 	const struct soc_device_attribute *soc;
+	struct resource *regs;
 
 	match = of_match_device(omap_sdhci_match, dev);
 	if (!match)
@@ -1049,6 +1054,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	}
 	offset = data->offset;
 
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
 	host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
 				sizeof(*omap_host));
 	if (IS_ERR(host)) {
@@ -1065,6 +1074,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->timing = MMC_TIMING_LEGACY;
 	omap_host->flags = data->flags;
 	host->ioaddr += offset;
+	host->mapbase = regs->start + offset;
 
 	mmc = host->mmc;
 	sdhci_get_of_property(pdev);
@@ -1134,6 +1144,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
 	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
 
+	/* Switch to external DMA only if there is the "dmas" property */
+	if (of_find_property(dev->of_node, "dmas", NULL))
+		sdhci_switch_external_dma(host, true);
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto err_put_sync;
-- 
2.19.2


  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16 10:51 [PATCH v5 00/10] Port am335x and am437x devices to sdhci-omap Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 01/10] dt-bindings: sdhci-omap: Add properties for using external dma Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 02/10] mmc: sdhci: Factor out some operations set to their own functions Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 03/10] mmc: sdhci: add support for using external DMA devices Faiz Abbas
2020-01-16 10:51 ` Faiz Abbas [this message]
2020-01-16 10:51 ` [PATCH v5 05/10] mmc: sdhci: Convert sdhci_set_timeout_irq() to non-static Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 06/10] mmc: sdhci: Refactor sdhci_set_timeout() Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 07/10] mmc: sdhci-omap: Disable data timeout interrupt during erase Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 08/10] dt-bindings: sdhci-omap: Add am335x and am437x specific bindings Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 09/10] mmc: sdhci-omap: Add am335x and am437x specific compatibles Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 10/10] mmc: sdhci-omap: Add special reset capability Faiz Abbas
2020-01-16 15:37 ` [PATCH v5 00/10] Port am335x and am437x devices to sdhci-omap Ulf Hansson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116105154.7685-5-faiz_abbas@ti.com \
    --to=faiz_abbas@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mmc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mmc/0 linux-mmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mmc linux-mmc/ https://lore.kernel.org/linux-mmc \
		linux-mmc@vger.kernel.org
	public-inbox-index linux-mmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git