From: Johan Jonker <jbx6244@gmail.com> To: ulf.hansson@linaro.org Cc: robh+dt@kernel.org, mark.rutland@arm.com, heiko@sntech.de, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org Subject: [PATCH v2 2/3] dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml Date: Thu, 16 Jan 2020 16:22:29 +0100 Message-ID: <20200116152230.29831-2-jbx6244@gmail.com> (raw) In-Reply-To: <20200116152230.29831-1-jbx6244@gmail.com> Current dts files with 'dwmmc' nodes are manually verified. In order to automate this process rockchip-dw-mshc.txt has to be converted to yaml. In the new setup rockchip-dw-mshc.yaml will inherit properties from mmc-controller.yaml and synopsys-dw-mshc-common.yaml. 'dwmmc' will no longer be a valid name for a node and should be changed to 'mmc'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- .../devicetree/bindings/mmc/rockchip-dw-mshc.txt | 49 -------- .../devicetree/bindings/mmc/rockchip-dw-mshc.yaml | 123 +++++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 124 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt create mode 100644 Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt deleted file mode 100644 index 6f629b12b..000000000 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Rockchip specific extensions to the Synopsys Designware Mobile - Storage Host Controller - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsys dw mshc controller properties described -by synopsys-dw-mshc.txt and the properties used by the Rockchip specific -extensions to the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: - -* compatible: should be - - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, - before RK3288 - - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 - - "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip PX30 - - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - - "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x - - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328 - - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 - -Optional Properties: -* clocks: from common clock binding: if ciu-drive and ciu-sample are - specified in clock-names, should contain handles to these clocks. - -* clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt - two more clocks "ciu-drive" and "ciu-sample" are supported. They are used - to control the clock phases, "ciu-sample" is required for tuning high- - speed modes. - -* rockchip,default-sample-phase: The default phase to set ciu-sample at - probing, low speeds or in case where all phases work at tuning time. - If not specified 0 deg will be used. - -* rockchip,desired-num-phases: The desired number of times that the host - execute tuning when needed. If not specified, the host will do tuning - for 360 times, namely tuning for each degree. - -Example: - - rkdwmmc0@12200000 { - compatible = "rockchip,rk3288-dw-mshc"; - reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml new file mode 100644 index 000000000..2f70f5ef0 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip designware mobile storage host controller device tree bindings + +description: + Rockchip uses the Synopsys designware mobile storage host controller + to interface a SoC with storage medium such as eMMC or SD/MMC cards. + This file documents the combined properties for the core Synopsys dw mshc + controller that are not already included in the synopsys-dw-mshc-common.yaml + file and the Rockchip specific extensions. + +allOf: + - $ref: "synopsys-dw-mshc-common.yaml#" + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + # for Rockchip RK2928 and before RK3288 + - const: rockchip,rk2928-dw-mshc + # for Rockchip RK3288 + - const: rockchip,rk3288-dw-mshc + - items: + - enum: + # for Rockchip PX30 + - rockchip,px30-dw-mshc + # for Rockchip RK3036 + - rockchip,rk3036-dw-mshc + # for Rockchip RK322x + - rockchip,rk3228-dw-mshc + # for Rockchip RK3328 + - rockchip,rk3328-dw-mshc + # for Rockchip RK3368 + - rockchip,rk3368-dw-mshc + # for Rockchip RK3399 + - rockchip,rk3399-dw-mshc + # for Rockchip RV1108 + - rockchip,rv1108-dw-mshc + - const: rockchip,rk3288-dw-mshc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + description: + Handle to "biu" and "ciu" clocks for the bus interface unit clock and + the card interface unit clock. If "ciu-drive" and "ciu-sample" are + specified in clock-names, it should also contain + handles to these clocks. + + clock-names: + minItems: 2 + items: + - const: biu + - const: ciu + - const: ciu-drive + - const: ciu-sample + description: + Apart from the clock-names "biu" and "ciu" two more clocks + "ciu-drive" and "ciu-sample" are supported. They are used + to control the clock phases, "ciu-sample" is required for tuning + high speed modes. + + rockchip,default-sample-phase: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 360 + default: 0 + description: + The default phase to set "ciu-sample" at probing, + low speeds or in case where all phases work at tuning time. + If not specified 0 deg will be used. + + rockchip,desired-num-phases: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 360 + default: 360 + description: + The desired number of times that the host execute tuning when needed. + If not specified, the host will do tuning for 360 times, + namely tuning for each degree. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + sdmmc: mmc@ff0c0000 { + compatible = "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0c0000 0x0 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index d6ad01d71..1b16c0fdf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2240,6 +2240,7 @@ L: linux-rockchip@lists.infradead.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +F: Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml F: arch/arm/boot/dts/rk3* F: arch/arm/boot/dts/rv1108* F: arch/arm/mach-rockchip/ -- 2.11.0
next prev parent reply index Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-16 15:22 [PATCH v2 1/3] dt-bindings: mmc: convert synopsys " Johan Jonker 2020-01-16 15:22 ` Johan Jonker [this message] 2020-01-22 16:05 ` [PATCH v2 2/3] dt-bindings: mmc: convert rockchip " Rob Herring 2020-01-24 11:25 ` Ulf Hansson 2020-01-16 15:22 ` [PATCH v2 3/3] dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308 Johan Jonker 2020-01-22 16:05 ` Rob Herring 2020-01-24 11:25 ` Ulf Hansson 2020-01-22 16:05 ` [PATCH v2 1/3] dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml Rob Herring 2020-01-24 11:25 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200116152230.29831-2-jbx6244@gmail.com \ --to=jbx6244@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-mmc Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-mmc/0 linux-mmc/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-mmc linux-mmc/ https://lore.kernel.org/linux-mmc \ linux-mmc@vger.kernel.org public-inbox-index linux-mmc Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mmc AGPL code for this site: git clone https://public-inbox.org/public-inbox.git