From: Ulf Hansson <ulf.hansson@linaro.org>
To: linux-mmc@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Ludovic Barre <ludovic.barre@st.com>,
Baolin Wang <baolin.wang7@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
mirq-linux@rere.qmqm.pl
Subject: [PATCH 08/12] mmc: core: Convert to mmc_poll_for_busy() for erase/trim/discard
Date: Tue, 4 Feb 2020 09:54:45 +0100 [thread overview]
Message-ID: <20200204085449.32585-9-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20200204085449.32585-1-ulf.hansson@linaro.org>
Rather than open coding the polling loop in mmc_do_erase(), let's convert
to use mmc_poll_for_busy().
To allow a slightly different error parsing during polling, compared to the
__mmc_switch() case, a new in-parameter to mmc_poll_for_busy() is needed,
but other than that the conversion is straight forward.
Besides addressing the open coding issue, moving to mmc_poll_for_busy() for
erase/trim/discard improves the behaviour according to below.
- Adds support for polling via the optional ->card_busy() host ops.
- Returns zero to indicate success when the final polling attempt finds the
card non-busy, even if the timeout expired.
- Exits the polling loop when state moves to R1_STATE_TRAN, rather than
when leaving R1_STATE_PRG.
- Decreases the starting range for throttling to 32-64us.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/core/core.c | 36 ++----------------------------------
drivers/mmc/core/mmc_ops.c | 30 ++++++++++++++++++++++++------
drivers/mmc/core/mmc_ops.h | 7 +++++++
3 files changed, 33 insertions(+), 40 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index aa54d359dab7..6b38c194d74f 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1658,8 +1658,6 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
struct mmc_command cmd = {};
unsigned int qty = 0, busy_timeout = 0;
bool use_r1b_resp = false;
- unsigned long timeout;
- int loop_udelay=64, udelay_max=32768;
int err;
mmc_retune_hold(card->host);
@@ -1760,38 +1758,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
goto out;
- timeout = jiffies + msecs_to_jiffies(busy_timeout);
- do {
- memset(&cmd, 0, sizeof(struct mmc_command));
- cmd.opcode = MMC_SEND_STATUS;
- cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
- /* Do not retry else we can't see errors */
- err = mmc_wait_for_cmd(card->host, &cmd, 0);
- if (err || R1_STATUS(cmd.resp[0])) {
- pr_err("error %d requesting status %#x\n",
- err, cmd.resp[0]);
- err = -EIO;
- goto out;
- }
-
- /* Timeout if the device never becomes ready for data and
- * never leaves the program state.
- */
- if (time_after(jiffies, timeout)) {
- pr_err("%s: Card stuck in programming state! %s\n",
- mmc_hostname(card->host), __func__);
- err = -EIO;
- goto out;
- }
- if ((cmd.resp[0] & R1_READY_FOR_DATA) &&
- R1_CURRENT_STATE(cmd.resp[0]) != R1_STATE_PRG)
- break;
-
- usleep_range(loop_udelay, loop_udelay*2);
- if (loop_udelay < udelay_max)
- loop_udelay *= 2;
- } while (1);
+ /* Let's poll to find out when the erase operation completes. */
+ err = mmc_poll_for_busy(card, busy_timeout, MMC_BUSY_ERASE);
out:
mmc_retune_release(card->host);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index c14e24570b4e..5643277a4eeb 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -445,7 +445,7 @@ int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal)
}
static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
- bool *busy)
+ enum mmc_busy_cmd busy_cmd, bool *busy)
{
struct mmc_host *host = card->host;
u32 status = 0;
@@ -464,7 +464,17 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
if (err)
return err;
- err = mmc_switch_status_error(card->host, status);
+ switch (busy_cmd) {
+ case MMC_BUSY_CMD6:
+ err = mmc_switch_status_error(card->host, status);
+ break;
+ case MMC_BUSY_ERASE:
+ err = R1_STATUS(status) ? -EIO : 0;
+ break;
+ default:
+ err = -EINVAL;
+ }
+
if (err)
return err;
@@ -472,8 +482,9 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
return 0;
}
-static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
- bool send_status, bool retry_crc_err)
+static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+ bool send_status, bool retry_crc_err,
+ enum mmc_busy_cmd busy_cmd)
{
struct mmc_host *host = card->host;
int err;
@@ -500,7 +511,7 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
*/
expired = time_after(jiffies, timeout);
- err = mmc_busy_status(card, retry_crc_err, &busy);
+ err = mmc_busy_status(card, retry_crc_err, busy_cmd, &busy);
if (err)
return err;
@@ -522,6 +533,12 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
return 0;
}
+int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+ enum mmc_busy_cmd busy_cmd)
+{
+ return __mmc_poll_for_busy(card, timeout_ms, true, false, busy_cmd);
+}
+
/**
* __mmc_switch - modify EXT_CSD register
* @card: the MMC card associated with the data transfer
@@ -589,7 +606,8 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
goto out_tim;
/* Let's try to poll to find out when the command is completed. */
- err = mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err);
+ err = __mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err,
+ MMC_BUSY_CMD6);
if (err)
goto out;
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index de0c509a3a38..8cd05fb583da 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -10,6 +10,11 @@
#include <linux/types.h>
+enum mmc_busy_cmd {
+ MMC_BUSY_CMD6,
+ MMC_BUSY_ERASE,
+};
+
struct mmc_host;
struct mmc_card;
@@ -30,6 +35,8 @@ int mmc_interrupt_hpi(struct mmc_card *card);
int mmc_can_ext_csd(struct mmc_card *card);
int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
+int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+ enum mmc_busy_cmd busy_cmd);
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms, unsigned char timing,
bool send_status, bool retry_crc_err);
--
2.17.1
next prev parent reply other threads:[~2020-02-04 8:55 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-04 8:54 [PATCH 00/12] mmc: core: Improve code for polling and HW busy detect Ulf Hansson
2020-02-04 8:54 ` [PATCH 01/12] mmc: core: Throttle polling rate for CMD6 Ulf Hansson
2020-02-12 13:51 ` Ludovic BARRE
2020-02-12 14:18 ` Ulf Hansson
2020-02-12 14:24 ` Ludovic BARRE
2020-02-04 8:54 ` [PATCH 02/12] mmc: core: Drop unused define Ulf Hansson
2020-02-04 8:54 ` [PATCH 03/12] mmc: core: Extend mmc_switch_status() to rid of __mmc_switch_status() Ulf Hansson
2020-02-04 8:54 ` [PATCH 04/12] mmc: core: Drop redundant in-parameter to __mmc_switch() Ulf Hansson
2020-02-04 8:54 ` [PATCH 05/12] mmc: core: Split up mmc_poll_for_busy() Ulf Hansson
2020-02-04 8:54 ` [PATCH 06/12] mmc: core: Enable re-use of mmc_blk_in_tran_state() Ulf Hansson
2020-02-04 8:54 ` [PATCH 07/12] mmc: core: Update CMD13 busy check for CMD6 commands Ulf Hansson
2020-02-04 8:54 ` Ulf Hansson [this message]
2020-02-04 8:54 ` [PATCH 09/12] mmc: core: Drop redundant out-parameter to mmc_send_hpi_cmd() Ulf Hansson
2020-02-04 8:54 ` [PATCH 10/12] mmc: core: Convert to mmc_poll_for_busy() for HPI commands Ulf Hansson
2020-02-04 8:54 ` [PATCH 11/12] mmc: core: Fixup support for HW busy detection " Ulf Hansson
2020-02-04 8:54 ` [PATCH 12/12] mmc: core: Re-work the error path for the eMMC sanitize command Ulf Hansson
2020-02-11 22:29 ` kbuild test robot
2020-02-11 13:17 ` [PATCH 00/12] mmc: core: Improve code for polling and HW busy detect Baolin Wang
2020-02-13 6:23 ` Baolin Wang
2020-02-13 11:08 ` Ulf Hansson
2020-02-13 14:42 ` Ludovic BARRE
2020-02-14 14:21 ` Ulf Hansson
2020-02-18 23:38 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200204085449.32585-9-ulf.hansson@linaro.org \
--to=ulf.hansson@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=baolin.wang7@gmail.com \
--cc=chaotian.jing@mediatek.com \
--cc=linus.walleij@linaro.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ludovic.barre@st.com \
--cc=mirq-linux@rere.qmqm.pl \
--cc=shawn.lin@rock-chips.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).