From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-mmc@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: Re: [RFC PATCH 5/6] mmc: tmio: factor out TAP usage
Date: Tue, 11 Feb 2020 00:57:30 +0100 [thread overview]
Message-ID: <20200210235730.GE2443363@oden.dyn.berto.se> (raw)
In-Reply-To: <20200129203709.30493-6-wsa+renesas@sang-engineering.com>
Hi Wolfram,
Thanks for your work.
On 2020-01-29 21:37:08 +0100, Wolfram Sang wrote:
> TAPs are Renesas SDHI specific. Now that we moved all handling to the
> SDHI core, we can also move the definitions from the TMIO struct to the
> SDHI one.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/mmc/host/renesas_sdhi.h | 5 ++++
> drivers/mmc/host/renesas_sdhi_core.c | 38 ++++++++++++++--------------
> drivers/mmc/host/tmio_mmc.h | 5 ----
> 3 files changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h
> index 11a0b2bca3aa..7a1a741547f2 100644
> --- a/drivers/mmc/host/renesas_sdhi.h
> +++ b/drivers/mmc/host/renesas_sdhi.h
> @@ -58,6 +58,11 @@ struct renesas_sdhi {
> u32 scc_tappos;
> u32 scc_tappos_hs400;
> bool doing_tune;
> +
> + /* Tuning values: 1 for success, 0 for failure */
> + DECLARE_BITMAP(taps, BITS_PER_BYTE * sizeof(long));
> + unsigned int tap_num;
> + unsigned long tap_set;
> };
>
> #define host_to_priv(host) \
> diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
> index 0c9e5e010bda..22eaabe513d0 100644
> --- a/drivers/mmc/host/renesas_sdhi_core.c
> +++ b/drivers/mmc/host/renesas_sdhi_core.c
> @@ -354,7 +354,7 @@ static void renesas_sdhi_hs400_complete(struct tmio_mmc_host *host)
>
> if (priv->quirks && priv->quirks->hs400_4taps)
> sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET,
> - host->tap_set / 2);
> + priv->tap_set / 2);
>
> sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL,
> SH_MOBILE_SDHI_SCC_CKSEL_DTSEL |
> @@ -438,11 +438,11 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
> * result requiring the tap to be good in both runs before
> * considering it for tuning selection.
> */
> - for (i = 0; i < host->tap_num * 2; i++) {
> - int offset = host->tap_num * (i < host->tap_num ? 1 : -1);
> + for (i = 0; i < priv->tap_num * 2; i++) {
> + int offset = priv->tap_num * (i < priv->tap_num ? 1 : -1);
>
> - if (!test_bit(i, host->taps))
> - clear_bit(i + offset, host->taps);
> + if (!test_bit(i, priv->taps))
> + clear_bit(i + offset, priv->taps);
> }
>
> /*
> @@ -454,8 +454,8 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
> ntap = 0;
> tap_start = 0;
> tap_end = 0;
> - for (i = 0; i < host->tap_num * 2; i++) {
> - if (test_bit(i, host->taps)) {
> + for (i = 0; i < priv->tap_num * 2; i++) {
> + if (test_bit(i, priv->taps)) {
> ntap++;
> } else {
> if (ntap > tap_cnt) {
> @@ -474,12 +474,12 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
> }
>
> if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP)
> - host->tap_set = (tap_start + tap_end) / 2 % host->tap_num;
> + priv->tap_set = (tap_start + tap_end) / 2 % priv->tap_num;
> else
> return -EIO;
>
> /* Set SCC */
> - sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, host->tap_set);
> + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, priv->tap_set);
>
> /* Enable auto re-tuning */
> sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
> @@ -494,27 +494,27 @@ static int renesas_sdhi_execute_tuning(struct tmio_mmc_host *host, u32 opcode)
> struct renesas_sdhi *priv = host_to_priv(host);
> int i, ret;
>
> - host->tap_num = renesas_sdhi_init_tuning(host);
> - if (!host->tap_num)
> + priv->tap_num = renesas_sdhi_init_tuning(host);
> + if (!priv->tap_num)
> return 0; /* Tuning is not supported */
>
> - if (host->tap_num * 2 >= sizeof(host->taps) * BITS_PER_BYTE) {
> + if (priv->tap_num * 2 >= sizeof(priv->taps) * BITS_PER_BYTE) {
> dev_err(&host->pdev->dev,
> "Too many taps, please update 'taps' in tmio_mmc_host!\n");
> return -EINVAL;
> }
>
> priv->doing_tune = true;
> - bitmap_zero(host->taps, host->tap_num * 2);
> + bitmap_zero(priv->taps, priv->tap_num * 2);
>
> /* Issue CMD19 twice for each tap */
> - for (i = 0; i < 2 * host->tap_num; i++) {
> + for (i = 0; i < 2 * priv->tap_num; i++) {
> /* Set sampling clock position */
> - sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, i % host->tap_num);
> + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, i % priv->tap_num);
>
> ret = mmc_send_tuning(host->mmc, opcode, NULL);
> if (ret == 0)
> - set_bit(i, host->taps);
> + set_bit(i, priv->taps);
> }
>
> return renesas_sdhi_select_tuning(host);
> @@ -523,7 +523,7 @@ static int renesas_sdhi_execute_tuning(struct tmio_mmc_host *host, u32 opcode)
> static bool renesas_sdhi_manual_correction(struct tmio_mmc_host *host, bool use_4tap)
> {
> struct renesas_sdhi *priv = host_to_priv(host);
> - unsigned long new_tap = host->tap_set;
> + unsigned long new_tap = priv->tap_set;
> u32 val;
>
> val = sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ);
> @@ -560,9 +560,9 @@ static bool renesas_sdhi_manual_correction(struct tmio_mmc_host *host, bool use_
> return false;
> }
>
> - host->tap_set = (new_tap % host->tap_num);
> + priv->tap_set = (new_tap % priv->tap_num);
> sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET,
> - host->tap_set / (use_4tap ? 2 : 1));
> + priv->tap_set / (use_4tap ? 2 : 1));
>
> return false;
> }
> diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
> index b6fffd3d2650..b4cf10109162 100644
> --- a/drivers/mmc/host/tmio_mmc.h
> +++ b/drivers/mmc/host/tmio_mmc.h
> @@ -184,11 +184,6 @@ struct tmio_mmc_host {
> */
> int (*execute_tuning)(struct tmio_mmc_host *host, u32 opcode);
>
> - /* Tuning values: 1 for success, 0 for failure */
> - DECLARE_BITMAP(taps, BITS_PER_BYTE * sizeof(long));
> - unsigned int tap_num;
> - unsigned long tap_set;
> -
> void (*prepare_hs400_tuning)(struct tmio_mmc_host *host);
> void (*hs400_downgrade)(struct tmio_mmc_host *host);
> void (*hs400_complete)(struct tmio_mmc_host *host);
> --
> 2.20.1
>
--
Regards,
Niklas Söderlund
next prev parent reply other threads:[~2020-02-10 23:57 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 20:37 [RFC PATCH 0/6] mmc: tmio: move TAP handling to SDHI driver Wolfram Sang
2020-01-29 20:37 ` [RFC PATCH 1/6] mmc: tmio: refactor tuning execution into " Wolfram Sang
2020-02-10 22:44 ` Niklas Söderlund
2020-02-11 9:07 ` Wolfram Sang
2020-01-29 20:37 ` [RFC PATCH 2/6] mmc: renesas_sdhi: complain loudly if driver needs update Wolfram Sang
2020-02-10 22:47 ` Niklas Söderlund
2020-01-29 20:37 ` [RFC PATCH 3/6] mmc: tmio: give callback a generic name Wolfram Sang
2020-02-10 22:51 ` Niklas Söderlund
2020-01-29 20:37 ` [RFC PATCH 4/6] mmc: tmio: enforce retune after runtime suspend Wolfram Sang
2020-02-10 23:53 ` Niklas Söderlund
2020-01-29 20:37 ` [RFC PATCH 5/6] mmc: tmio: factor out TAP usage Wolfram Sang
2020-02-10 23:57 ` Niklas Söderlund [this message]
2020-01-29 20:37 ` [RFC PATCH 6/6] mmc: tmio: remove superfluous callback wrappers Wolfram Sang
2020-02-11 0:02 ` Niklas Söderlund
2020-02-11 9:09 ` Wolfram Sang
2020-02-05 0:22 ` [RFC PATCH 0/6] mmc: tmio: move TAP handling to SDHI driver Yoshihiro Shimoda
2020-02-13 13:56 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200210235730.GE2443363@oden.dyn.berto.se \
--to=niklas.soderlund@ragnatech.se \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).