From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Kyungmin Seo <kyungmin.seo@intel.com>
Cc: linux-mmc <linux-mmc@vger.kernel.org>
Subject: [PATCH RFC 2/3] mmc: core: Do not check CRC response for switch from HS400 to HS200
Date: Thu, 12 Mar 2020 16:25:00 +0200 [thread overview]
Message-ID: <20200312142501.9868-3-adrian.hunter@intel.com> (raw)
In-Reply-To: <20200312142501.9868-1-adrian.hunter@intel.com>
Switching from HS400 to HS200 may experience CRC errors. Do not check
CRC response in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/core/mmc.c | 22 +++++++++++-----------
drivers/mmc/core/mmc_ops.c | 7 +++++--
drivers/mmc/core/mmc_ops.h | 2 +-
3 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c2abd417a84a..3e2ad728b55e 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1055,7 +1055,7 @@ static int mmc_select_hs(struct mmc_card *card)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS,
card->ext_csd.generic_cmd6_time, MMC_TIMING_MMC_HS,
- true, true);
+ true, true, false);
if (err)
pr_warn("%s: switch to high-speed failed, err:%d\n",
mmc_hostname(card->host), err);
@@ -1087,7 +1087,7 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
ext_csd_bits,
card->ext_csd.generic_cmd6_time,
MMC_TIMING_MMC_DDR52,
- true, true);
+ true, true, false);
if (err) {
pr_err("%s: switch to bus width %d ddr failed\n",
mmc_hostname(host), 1 << bus_width);
@@ -1155,7 +1155,7 @@ static int mmc_select_hs400(struct mmc_card *card)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, val,
card->ext_csd.generic_cmd6_time, 0,
- false, true);
+ false, true, false);
if (err) {
pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
mmc_hostname(host), err);
@@ -1197,7 +1197,7 @@ static int mmc_select_hs400(struct mmc_card *card)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, val,
card->ext_csd.generic_cmd6_time, 0,
- false, true);
+ false, true, false);
if (err) {
pr_err("%s: switch to hs400 failed, err:%d\n",
mmc_hostname(host), err);
@@ -1243,7 +1243,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
val = EXT_CSD_TIMING_HS;
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
val, card->ext_csd.generic_cmd6_time, 0,
- false, true);
+ false, true, true);
if (err)
goto out_err;
@@ -1256,7 +1256,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
/* Switch HS DDR to HS */
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
EXT_CSD_BUS_WIDTH_8, card->ext_csd.generic_cmd6_time,
- 0, false, true);
+ 0, false, true, false);
if (err)
goto out_err;
@@ -1274,7 +1274,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
val, card->ext_csd.generic_cmd6_time, 0,
- false, true);
+ false, true, false);
if (err)
goto out_err;
@@ -1358,7 +1358,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS,
card->ext_csd.generic_cmd6_time, 0,
- false, true);
+ false, true, false);
if (err) {
pr_err("%s: switch to hs for hs400es failed, err:%d\n",
mmc_hostname(host), err);
@@ -1392,7 +1392,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, val,
card->ext_csd.generic_cmd6_time, 0,
- false, true);
+ false, true, false);
if (err) {
pr_err("%s: switch to hs400es failed, err:%d\n",
mmc_hostname(host), err);
@@ -1457,7 +1457,7 @@ static int mmc_select_hs200(struct mmc_card *card)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, val,
card->ext_csd.generic_cmd6_time, 0,
- false, true);
+ false, true, false);
if (err)
goto err;
old_timing = host->ios.timing;
@@ -1959,7 +1959,7 @@ static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type)
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
- notify_type, timeout, 0, false, false);
+ notify_type, timeout, 0, false, false, false);
if (err)
pr_err("%s: Power Off Notification timed out, %u\n",
mmc_hostname(card->host), timeout);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 619088a94688..2baaa66e491d 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -552,12 +552,13 @@ int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
* @timing: new timing to change to
* @send_status: send status cmd to poll for busy
* @retry_crc_err: retry when CRC errors when polling with CMD13 for busy
+ * @no_crc_resp: do not require to check CRC response
*
* Modifies the EXT_CSD register for selected card.
*/
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms, unsigned char timing,
- bool send_status, bool retry_crc_err)
+ bool send_status, bool retry_crc_err, bool no_crc_resp)
{
struct mmc_host *host = card->host;
int err;
@@ -594,6 +595,8 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
} else {
cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
}
+ if (no_crc_resp)
+ cmd.flags &= ~MMC_RSP_CRC;
if (index == EXT_CSD_SANITIZE_START)
cmd.sanitize_busy = true;
@@ -639,7 +642,7 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms)
{
return __mmc_switch(card, set, index, value, timeout_ms, 0,
- true, false);
+ true, false, false);
}
EXPORT_SYMBOL_GPL(mmc_switch);
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 38dcfeeaf6d5..1a75c347b8a7 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -40,7 +40,7 @@ int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
enum mmc_busy_cmd busy_cmd);
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms, unsigned char timing,
- bool send_status, bool retry_crc_err);
+ bool send_status, bool retry_crc_err, bool no_crc_resp);
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms);
void mmc_run_bkops(struct mmc_card *card);
--
2.17.1
next prev parent reply other threads:[~2020-03-12 14:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 14:24 [PATCH RFC 0/3] mmc: core: Do not change frequency before switch from HS400 Adrian Hunter
2020-03-12 14:24 ` [PATCH RFC 1/3] mmc: core: Try harder if transfer mode switch fails Adrian Hunter
2020-03-12 15:45 ` Ulf Hansson
2020-03-13 9:52 ` Adrian Hunter
2020-03-13 10:40 ` Ulf Hansson
2020-03-13 14:07 ` Adrian Hunter
2020-03-12 14:25 ` Adrian Hunter [this message]
2020-03-12 16:02 ` [PATCH RFC 2/3] mmc: core: Do not check CRC response for switch from HS400 to HS200 Ulf Hansson
2020-03-12 14:25 ` [PATCH RFC 3/3] mmc: core: Do not change frequency before switch from HS400 Adrian Hunter
-- strict thread matches above, loose matches on Subject: below --
2020-03-12 14:24 [PATCH RFC 0/3] " Adrian Hunter
2020-03-12 14:24 ` [PATCH RFC 2/3] mmc: core: Do not check CRC response for switch from HS400 to HS200 Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200312142501.9868-3-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=chaotian.jing@mediatek.com \
--cc=kyungmin.seo@intel.com \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).