From: Lars Povlsen <lars.povlsen@microchip.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>,
SoC Team <soc@kernel.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>,
Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
<linux-mmc@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v4 3/3] arm64: dts: sparx5: Add Sparx5 eMMC support
Date: Thu, 18 Jun 2020 16:13:26 +0200 [thread overview]
Message-ID: <20200618141326.25723-4-lars.povlsen@microchip.com> (raw)
In-Reply-To: <20200618141326.25723-1-lars.povlsen@microchip.com>
This adds eMMC support to the applicable Sparx5 board configuration
files.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
arch/arm64/boot/dts/microchip/sparx5.dtsi | 24 +++++++++++++++++++
.../boot/dts/microchip/sparx5_pcb125.dts | 23 ++++++++++++++++++
.../boot/dts/microchip/sparx5_pcb134_emmc.dts | 23 ++++++++++++++++++
.../boot/dts/microchip/sparx5_pcb135_emmc.dts | 23 ++++++++++++++++++
4 files changed, 93 insertions(+)
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 84bca999420ef..c9dbd1a8b22b6 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/microchip,sparx5.h>
/ {
compatible = "microchip,sparx5";
@@ -162,6 +163,20 @@ timer1: timer@600105000 {
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
+ sdhci0: sdhci@600800000 {
+ compatible = "microchip,dw-sparx5-sdhci";
+ status = "disabled";
+ reg = <0x6 0x00800000 0x1000>;
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+ clocks = <&clks CLK_ID_AUX1>;
+ clock-names = "core";
+ assigned-clocks = <&clks CLK_ID_AUX1>;
+ assigned-clock-rates = <800000000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ };
+
gpio: pinctrl@6110101e0 {
compatible = "microchip,sparx5-pinctrl";
reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
@@ -191,6 +206,15 @@ i2c2_pins: i2c2-pins {
pins = "GPIO_28", "GPIO_29";
function = "twi2";
};
+
+ emmc_pins: emmc-pins {
+ pins = "GPIO_34", "GPIO_35", "GPIO_36",
+ "GPIO_37", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ function = "emmc";
+ };
};
i2c0: i2c@600101000 {
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
index 91ee5b6cfc37a..573309fe45823 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -16,6 +16,29 @@ memory@0 {
};
};
+&gpio {
+ emmc_pins: emmc-pins {
+ /* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+ * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+ */
+ pins = "GPIO_34", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ drive-strength = <3>;
+ function = "emmc";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&emmc_pins>;
+ max-frequency = <8000000>;
+ microchip,clock-delay = <10>;
+};
+
&i2c1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
index 10081a66961bb..bbb9852c1f151 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
@@ -15,3 +15,26 @@ memory@0 {
reg = <0x00000000 0x00000000 0x10000000>;
};
};
+
+&gpio {
+ emmc_pins: emmc-pins {
+ /* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+ * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+ */
+ pins = "GPIO_34", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ drive-strength = <3>;
+ function = "emmc";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ non-removable;
+ max-frequency = <52000000>;
+ bus-width = <8>;
+ microchip,clock-delay = <10>;
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
index 741f0e12260e5..f82266fe2ad49 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
@@ -15,3 +15,26 @@ memory@0 {
reg = <0x00000000 0x00000000 0x10000000>;
};
};
+
+&gpio {
+ emmc_pins: emmc-pins {
+ /* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+ * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+ */
+ pins = "GPIO_34", "GPIO_38", "GPIO_39",
+ "GPIO_40", "GPIO_41", "GPIO_42",
+ "GPIO_43", "GPIO_44", "GPIO_45",
+ "GPIO_46", "GPIO_47";
+ drive-strength = <3>;
+ function = "emmc";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ non-removable;
+ max-frequency = <52000000>;
+ bus-width = <8>;
+ microchip,clock-delay = <10>;
+};
--
2.27.0
next prev parent reply other threads:[~2020-06-18 14:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-18 14:13 [PATCH v4 0/3] mmc: Adding support for Microchip Sparx5 SoC Lars Povlsen
2020-06-18 14:13 ` [PATCH v4 1/3] dt-bindings: mmc: Add Sparx5 SDHCI controller bindings Lars Povlsen
2020-06-29 21:54 ` Rob Herring
2020-06-18 14:13 ` [PATCH v4 2/3] sdhci: sparx5: Add Sparx5 SoC eMMC driver Lars Povlsen
2020-06-18 14:43 ` Adrian Hunter
2020-07-22 11:54 ` Lars Povlsen
2020-07-24 10:47 ` Ulf Hansson
2020-07-24 11:32 ` Lars Povlsen
2020-07-24 12:43 ` Ulf Hansson
2020-06-18 14:13 ` Lars Povlsen [this message]
2020-08-24 15:10 [PATCH v4 0/3] mmc: Adding support for Microchip Sparx5 SoC Lars Povlsen
2020-08-24 15:10 ` [PATCH v4 3/3] arm64: dts: sparx5: Add Sparx5 eMMC support Lars Povlsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200618141326.25723-4-lars.povlsen@microchip.com \
--to=lars.povlsen@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=soc@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).