Linux-mmc Archive on lore.kernel.org
 help / color / Atom feed
* [RFC PATCH V3 19/21] mmc: core: add post-mmc_attach_sd hook
@ 2020-07-10 11:12 Ben Chuang
  0 siblings, 0 replies; only message in thread
From: Ben Chuang @ 2020-07-10 11:12 UTC (permalink / raw)
  To: adrian.hunter, ulf.hansson
  Cc: linux-mmc, linux-kernel, ben.chuang, takahiro.akashi, greg.tu,
	Ben Chuang

From: AKASHI Takahiro <takahiro.akashi@linaro.org>

This "post" hook for mmc_attach_sd() will be required to enable UHS-II
support, at least, on GL9755.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 drivers/mmc/core/sd.c    | 6 ++++++
 include/linux/mmc/host.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c5b071bd98b3..fd4cae4ed747 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1381,6 +1381,12 @@ int mmc_attach_sd(struct mmc_host *host)
 		goto remove_card;
 
 	mmc_claim_host(host);
+
+	/* TODO: Is this the right place? */
+	if ((host->flags & MMC_UHS2_INITIALIZED) &&
+	    host->ops->uhs2_post_attach_sd)
+		host->ops->uhs2_post_attach_sd(host);
+
 	return 0;
 
 remove_card:
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 56bdb153ef16..e61e0ae62cff 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -180,6 +180,7 @@ struct mmc_host_ops {
 	int	(*uhs2_set_reg)(struct mmc_host *host, enum uhs2_act act);
 	void    (*uhs2_disable_clk)(struct mmc_host *host);
 	void    (*uhs2_enable_clk)(struct mmc_host *host);
+	void    (*uhs2_post_attach_sd)(struct mmc_host *host);
 };
 
 struct mmc_cqe_ops {
-- 
2.27.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-10 11:12 [RFC PATCH V3 19/21] mmc: core: add post-mmc_attach_sd hook Ben Chuang

Linux-mmc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mmc/0 linux-mmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mmc linux-mmc/ https://lore.kernel.org/linux-mmc \
		linux-mmc@vger.kernel.org
	public-inbox-index linux-mmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git