Linux-mmc Archive on lore.kernel.org
 help / color / Atom feed
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>
Cc: <ulf.hansson@linaro.org>, <adrian.hunter@intel.com>, <faiz_abbas@ti.com>
Subject: [PATCH] mmc: sdhci_am654: Add workaround for card detect debounce timer
Date: Thu, 30 Jul 2020 05:11:30 +0530
Message-ID: <20200729234130.25056-1-faiz_abbas@ti.com> (raw)

There is a one time delay because of a card detect debounce timer in the
controller IP. This timer runs as soon as power is applied to the module
regardless of whether a card is present or not and any writes to
SDHCI_POWER_ON will return 0 before it expires. This timeout has been
measured to be about 1 second in am654x and j721e.

Write-and-read-back in a loop on SDHCI_POWER_ON for a maximum of
1.5 seconds to make sure that the controller actually powers on.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 drivers/mmc/host/sdhci_am654.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index 1718b9e8af63..55cff9de2f3e 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -272,6 +272,7 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
 	sdhci_set_clock(host, clock);
 }
 
+#define MAX_POWER_ON_TIMEOUT	1500 /* ms */
 static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
 {
 	unsigned char timing = host->mmc->ios.timing;
@@ -291,6 +292,26 @@ static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
 	}
 
 	writeb(val, host->ioaddr + reg);
+	if (reg == SDHCI_POWER_CONTROL && (val & SDHCI_POWER_ON)) {
+		/*
+		 * Power on will not happen until the card detect debounce
+		 * timer expires. Wait at least 1.5 seconds for the power on
+		 * bit to be set
+		 */
+		ktime_t timeout = ktime_add_ms(ktime_get(),
+					       MAX_POWER_ON_TIMEOUT);
+		do {
+			if (ktime_compare(ktime_get(), timeout) > 0) {
+				dev_warn(mmc_dev(host->mmc),
+					 "Power on failed\n");
+
+				return;
+			}
+
+			writeb(val, host->ioaddr + reg);
+			usleep_range(1000, 10000);
+		} while (!(readb(host->ioaddr + reg) & SDHCI_POWER_ON));
+	}
 }
 
 static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
-- 
2.17.1


             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29 23:41 Faiz Abbas [this message]
2020-08-05  8:14 ` Adrian Hunter
2020-08-05  8:22   ` Faiz Abbas
2020-08-05  9:46     ` Adrian Hunter
2020-08-05 13:16       ` Faiz Abbas
2020-08-05 13:16         ` Faiz Abbas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200729234130.25056-1-faiz_abbas@ti.com \
    --to=faiz_abbas@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mmc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mmc/0 linux-mmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mmc linux-mmc/ https://lore.kernel.org/linux-mmc \
		linux-mmc@vger.kernel.org
	public-inbox-index linux-mmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git