Linux-mmc Archive on lore.kernel.org
 help / color / Atom feed
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-mmc@vger.kernel.org>
Cc: <robh+dt@kernel.org>, <ulf.hansson@linaro.org>
Subject: [PATCH] dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J7200 devices
Date: Sun, 2 Aug 2020 12:31:14 +0530
Message-ID: <20200802070114.9624-1-faiz_abbas@ti.com> (raw)

Add binding documentation for mmc host controllers present on
TI's J7200 SOC

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
index 6d202f4d9249..b49cbfdd679f 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
@@ -12,6 +12,8 @@ Required Properties:
 			"ti,am654-sdhci-5.1": SDHCI on AM654 device.
 			"ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
 			"ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
+			"ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
+			"ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
 	- reg: Must be two entries.
 		- The first should be the sdhci register space
 		- The second should the subsystem/phy register space
@@ -33,7 +35,9 @@ Required Properties:
 	  These bindings must be provided otherwise the driver will disable the
 	  corresponding speed mode (i.e. all nodes must provide at least -legacy)
 
-Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
+Optional Properties (Required for ti,am654-sdhci-5.1,
+				  ti,j721e-sdhci-8bit,
+				  ti,j7200-sdhci-8bit):
 	- ti,trm-icp: DLL trim select
 	- ti,driver-strength-ohm: driver strength in ohms.
 				  Valid values are 33, 40, 50, 66 and 100 ohms.
-- 
2.17.1


                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200802070114.9624-1-faiz_abbas@ti.com \
    --to=faiz_abbas@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mmc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mmc/0 linux-mmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mmc linux-mmc/ https://lore.kernel.org/linux-mmc \
		linux-mmc@vger.kernel.org
	public-inbox-index linux-mmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git