Linux-mmc Archive on lore.kernel.org
 help / color / Atom feed
From: Markus Reichl <m.reichl@fivetechno.de>
To: "Doug Anderson" <dianders@chromium.org>,
	"Heiko Stübner" <heiko@sntech.de>
Cc: Mark Rutland <mark.rutland@arm.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	Brian Norris <briannorris@chromium.org>,
	Tony Xie <tony.xie@rock-chips.com>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Jeffy Chen <jeffy.chen@rock-chips.com>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Vicente Bergas <vicencb@gmail.com>,
	"open list:ARM/Rockchip SoC..."
	<linux-rockchip@lists.infradead.org>,
	Rob Herring <robh+dt@kernel.org>,
	Klaus Goger <klaus.goger@theobroma-systems.com>,
	Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Philipp Tomsich <philipp.tomsich@theobroma-systems.com>,
	Randy Li <ayaka@soulik.info>,
	Kishon
Subject: Re: arm64: dts: rockchip: Disable HS400 for mmc on rk3399-roc-pc
Date: Mon, 18 Nov 2019 20:05:09 +0100
Message-ID: <2db7a63f-a091-db8d-3414-cac289011878@fivetechno.de> (raw)
In-Reply-To: <CAD=FV=VnjyQJpRcW6P1f4+ZrSOzAe2Cnoej=it4aCz+F_ozukw@mail.gmail.com>

Hi Doug,

Am 18.11.19 um 17:08 schrieb Doug Anderson:
> Hi,
> 
> 
> On Fri, Nov 15, 2019 at 3:19 AM Heiko Stübner <heiko@sntech.de> wrote:
>>
>> Hi Markus,
>>
>> Am Freitag, 15. November 2019, 11:37:58 CET schrieb Markus Reichl:
>> > Am 14.11.19 um 14:10 schrieb Heiko Stuebner:
>> > > $subject is missing the [PATCH] prefix
>> > will fix.
>>
>> no need to resend just for this ... just to keep in mind for future patches ;-)
>>
>>
>> > > Am Montag, 11. November 2019, 10:51:04 CET schrieb Markus Reichl:
>> > >> Working with rootfs on two 128GB mmcs on rk3399-roc-pc.
>> > >>
>> > >> One (mmc name 128G72, one screw hole) works fine in HS400 mode.
>> > >> Other (mmc name DJNB4R, firefly on pcb, two screw holes) gets lots of
>> > >> mmc1: "running CQE recovery", even hangs with damaged fs,
>> > >> when running under heavy load, e.g. compiling kernel.
>> > >> Both run fine with HS200.
>> > >>
>> > >> Disabling CQ with patch mmc: core: Add MMC Command Queue Support kernel parameter [0] did not help.
>> > >> [0] https://gitlab.com/ayufan-repos/rock64/linux-mainline-kernel/commit/54e264154b87dfe32a8359b2726e2d5611adbaf3
>> > >
>> > > I'm hoping for some input from other people in Cc but your mail headers
>> > > also referenced the drive-impendance series from Christoph [0], which
>> > > it seems we need to poke the phy maintainer again.
>> > >
>> > > Did you check if changing the impedance helped (like the signal dampening
>> > > Philipp described in one of the replies there).
>> >
>> > checked with
>> >
>> > &emmc_phy {
>> > +       drive-impedance-ohm = <33>;
>> >
>> > gives no improvement:
>>
>> That is sad ... I guess we really should disable hs400 then ...
>> that may give others more incentive to dive deeper ;-)
> 
> Just out of curiosity, is the problem with the strobe line, or with
> hs400?  Have you tried using the solution from "rk3399-gru.dtsi"?
> Namely:
> 
>         /*
>          * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
>          * same (or nearly the same) performance for all eMMC that are intended
>          * to be used.
>          */
>         assigned-clock-rates = <150000000>;
> 
> IIRC hs400 on rk3399 was a bit iffy but running at 150 MHz made it
> much more reliable and still gave you 300 MB/s transfer rate (so much
> better than hs200).  In reality many eMMC chips can't do > 300 MB/s
> anyway.
> 
I tried 150000000 and 100000000, but it did not help.

Gruß,
--
Markus

> -Doug
> 

  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190301153348.29870-1-christoph.muellner@theobroma-systems.com>
     [not found] ` <20190301153348.29870-2-christoph.muellner@theobroma-systems.com>
2019-11-11  9:51   ` Markus Reichl
2019-11-14 13:10     ` Heiko Stuebner
2019-11-15 10:37       ` Markus Reichl
2019-11-15 11:19         ` Heiko Stübner
2019-11-18 16:08           ` Doug Anderson
2019-11-18 19:05             ` Markus Reichl [this message]
     [not found]     ` <367bf78a-f079-f0b4-68fe-52c86823c174-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org>
2019-11-18  1:01       ` Heiko Stuebner

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2db7a63f-a091-db8d-3414-cac289011878@fivetechno.de \
    --to=m.reichl@fivetechno.de \
    --cc=ayaka@soulik.info \
    --cc=briannorris@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=enric.balletbo@collabora.com \
    --cc=heiko@sntech.de \
    --cc=jeffy.chen@rock-chips.com \
    --cc=klaus.goger@theobroma-systems.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=philipp.tomsich@theobroma-systems.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=tony.xie@rock-chips.com \
    --cc=vicencb@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mmc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mmc/0 linux-mmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mmc linux-mmc/ https://lore.kernel.org/linux-mmc \
		linux-mmc@vger.kernel.org
	public-inbox-index linux-mmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git