linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ludovic BARRE <ludovic.barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	DTML <devicetree@vger.kernel.org>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH V2] mmc: mmci: add threaded irq to abort DPSM of non-functional state
Date: Wed, 18 Dec 2019 16:19:42 +0100	[thread overview]
Message-ID: <7019a4b8-e7a4-0e3a-4c42-0d46c80e5126@st.com> (raw)
In-Reply-To: <CAPDyKFpoqEXO1JvjF=0hX97PiwP=2c1eWORsacb8QvZM=1Tvjw@mail.gmail.com>

hi ulf

Le 12/18/19 à 3:01 PM, Ulf Hansson a écrit :
> On Wed, 11 Dec 2019 at 14:40, Ludovic Barre <ludovic.Barre@st.com> wrote:
>>
>> From: Ludovic Barre <ludovic.barre@st.com>
>>
>> If datatimeout occurs on R1B request, the Data Path State Machine stays
>> in busy and is non-functional. Only a reset aborts the DPSM.
>>
>> Like a reset must be outside of critical section, this patch adds
>> threaded irq function to release state machine. In this case,
>> the mmc_request_done is called at the end of threaded irq and
>> skipped into irq handler.
>>
>> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> 
> Applied for next, thanks!
> 
> I took the liberty of doing some minor updates (changelog/comment),
> please have a look and let me know if there is something you want me
> to change.
> 

I read the modifications (changelog and comment function),
and it's ok for me.

thanks
Ludo

> And again, apologize for the delays!
> 
> Kind regards
> Uffe
> 
> 
>> ---
>> change V2:
>>   -check IRQ_WAKE_THREAD only in mmci_cmd_irq error part,
>>    to avoid this test in mmci_request_end.
>>
>> ---
>>   drivers/mmc/host/mmci.c | 46 +++++++++++++++++++++++++++++++++++------
>>   drivers/mmc/host/mmci.h |  1 +
>>   2 files changed, 41 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
>> index 40e72c30ea84..2b91757e3e84 100644
>> --- a/drivers/mmc/host/mmci.c
>> +++ b/drivers/mmc/host/mmci.c
>> @@ -1321,6 +1321,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
>>          } else if (host->variant->busy_timeout && busy_resp &&
>>                     status & MCI_DATATIMEOUT) {
>>                  cmd->error = -ETIMEDOUT;
>> +               host->irq_action = IRQ_WAKE_THREAD;
>>          } else {
>>                  cmd->resp[0] = readl(base + MMCIRESPONSE0);
>>                  cmd->resp[1] = readl(base + MMCIRESPONSE1);
>> @@ -1339,7 +1340,10 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
>>                                  return;
>>                          }
>>                  }
>> -               mmci_request_end(host, host->mrq);
>> +
>> +               if (host->irq_action != IRQ_WAKE_THREAD)
>> +                       mmci_request_end(host, host->mrq);
>> +
>>          } else if (sbc) {
>>                  mmci_start_command(host, host->mrq->cmd, 0);
>>          } else if (!host->variant->datactrl_first &&
>> @@ -1532,9 +1536,9 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
>>   {
>>          struct mmci_host *host = dev_id;
>>          u32 status;
>> -       int ret = 0;
>>
>>          spin_lock(&host->lock);
>> +       host->irq_action = IRQ_HANDLED;
>>
>>          do {
>>                  status = readl(host->base + MMCISTATUS);
>> @@ -1574,12 +1578,41 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
>>                  if (host->variant->busy_detect_flag)
>>                          status &= ~host->variant->busy_detect_flag;
>>
>> -               ret = 1;
>>          } while (status);
>>
>>          spin_unlock(&host->lock);
>>
>> -       return IRQ_RETVAL(ret);
>> +       return host->irq_action;
>> +}
>> +
>> +/*
>> + * mmci_irq_threaded is call if the mmci host need to release state machines
>> + * before to terminate the request.
>> + * If datatimeout occurs on R1B request, the Data Path State Machine stays
>> + * in busy and is non-functional. Only a reset can to abort the DPSM.
>> + */
>> +static irqreturn_t mmci_irq_threaded(int irq, void *dev_id)
>> +{
>> +       struct mmci_host *host = dev_id;
>> +       unsigned long flags;
>> +
>> +       if (host->rst) {
>> +               reset_control_assert(host->rst);
>> +               udelay(2);
>> +               reset_control_deassert(host->rst);
>> +       }
>> +
>> +       spin_lock_irqsave(&host->lock, flags);
>> +       writel(host->clk_reg, host->base + MMCICLOCK);
>> +       writel(host->pwr_reg, host->base + MMCIPOWER);
>> +       writel(MCI_IRQENABLE | host->variant->start_err,
>> +              host->base + MMCIMASK0);
>> +
>> +       host->irq_action = IRQ_HANDLED;
>> +       mmci_request_end(host, host->mrq);
>> +       spin_unlock_irqrestore(&host->lock, flags);
>> +
>> +       return host->irq_action;
>>   }
>>
>>   static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
>> @@ -2071,8 +2104,9 @@ static int mmci_probe(struct amba_device *dev,
>>                          goto clk_disable;
>>          }
>>
>> -       ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED,
>> -                       DRIVER_NAME " (cmd)", host);
>> +       ret = devm_request_threaded_irq(&dev->dev, dev->irq[0], mmci_irq,
>> +                                       mmci_irq_threaded, IRQF_SHARED,
>> +                                       DRIVER_NAME " (cmd)", host);
>>          if (ret)
>>                  goto clk_disable;
>>
>> diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
>> index 158e1231aa23..5e63c0596364 100644
>> --- a/drivers/mmc/host/mmci.h
>> +++ b/drivers/mmc/host/mmci.h
>> @@ -412,6 +412,7 @@ struct mmci_host {
>>
>>          struct timer_list       timer;
>>          unsigned int            oldstat;
>> +       u32                     irq_action;
>>
>>          /* pio stuff */
>>          struct sg_mapping_iter  sg_miter;
>> --
>> 2.17.1
>>

      reply	other threads:[~2019-12-18 15:20 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-11 13:39 [PATCH V2] mmc: mmci: add threaded irq to abort DPSM of non-functional state Ludovic Barre
2019-12-18 14:01 ` Ulf Hansson
2019-12-18 15:19   ` Ludovic BARRE [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7019a4b8-e7a4-0e3a-4c42-0d46c80e5126@st.com \
    --to=ludovic.barre@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).