linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Faiz Abbas <faiz_abbas@ti.com>,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-mmc@vger.kernel.org
Cc: kishon@ti.com, mark.rutland@arm.com, robh+dt@kernel.org,
	ulf.hansson@linaro.org, tony@atomide.com
Subject: Re: [PATCH v4 04/11] mmc: sdhci-omap: Add using external dma
Date: Wed, 15 Jan 2020 14:02:25 +0200	[thread overview]
Message-ID: <8c364afb-2a3a-3b5b-1f97-4c0a60c182b8@intel.com> (raw)
In-Reply-To: <20200106110133.13791-5-faiz_abbas@ti.com>

On 6/01/20 1:01 pm, Faiz Abbas wrote:
> From: Chunyan Zhang <zhang.chunyan@linaro.org>
> 
> sdhci-omap can support both external dma controller via dmaengine framework
> as well as ADMA which standard SD host controller provides.
> 
> Fixes by Faiz Abbas <fazi_abbas@ti.com>:
> 1. Switch to DMA slave mode when using external DMA
> 2. Add offset to mapbase
> 
> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/Kconfig      |  1 +
>  drivers/mmc/host/sdhci-omap.c | 16 +++++++++++++++-
>  2 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index adef971582a1..2c0d90b9383e 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -1010,6 +1010,7 @@ config MMC_SDHCI_OMAP
>  	depends on MMC_SDHCI_PLTFM && OF
>  	select THERMAL
>  	imply TI_SOC_THERMAL
> +	select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
>  	help
>  	  This selects the Secure Digital Host Controller Interface (SDHCI)
>  	  support present in TI's DRA7 SOCs. The controller supports
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 083e7e053c95..84d85aa743da 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -685,7 +685,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host)
>  	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
>  
>  	reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
> -	reg |= CON_DMA_MASTER;
> +	reg &= ~CON_DMA_MASTER;
> +	/* Switch to DMA slave mode when using external DMA */
> +	if (!host->use_external_dma)
> +		reg |= CON_DMA_MASTER;
> +
>  	sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
>  
>  	return 0;
> @@ -1037,6 +1041,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
>  	const struct of_device_id *match;
>  	struct sdhci_omap_data *data;
>  	const struct soc_device_attribute *soc;
> +	struct resource *regs;
>  
>  	match = of_match_device(omap_sdhci_match, dev);
>  	if (!match)
> @@ -1049,6 +1054,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
>  	}
>  	offset = data->offset;
>  
> +	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!regs)
> +		return -ENXIO;
> +
>  	host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
>  				sizeof(*omap_host));
>  	if (IS_ERR(host)) {
> @@ -1065,6 +1074,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
>  	omap_host->timing = MMC_TIMING_LEGACY;
>  	omap_host->flags = data->flags;
>  	host->ioaddr += offset;
> +	host->mapbase = regs->start + offset;
>  
>  	mmc = host->mmc;
>  	sdhci_get_of_property(pdev);
> @@ -1134,6 +1144,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
>  	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
>  	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
>  
> +	/* Switch to external DMA only if there is the "dmas" property */
> +	if (of_find_property(dev->of_node, "dmas", NULL))
> +		sdhci_switch_external_dma(host, true);
> +
>  	ret = sdhci_setup_host(host);
>  	if (ret)
>  		goto err_put_sync;
> 


  reply	other threads:[~2020-01-15 12:03 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-06 11:01 [PATCH v4 00/11] Port am335x and am437x devices to sdhci-omap Faiz Abbas
2020-01-06 11:01 ` [PATCH v4 01/11] dt-bindings: sdhci-omap: Add properties for using external dma Faiz Abbas
2020-01-06 11:01 ` [PATCH v4 02/11] mmc: sdhci: Factor out some operations set to their own functions Faiz Abbas
2020-01-07  6:34   ` Baolin Wang
2020-01-07  7:22     ` Faiz Abbas
2020-01-08  1:32       ` Baolin Wang
2020-01-15 10:55   ` Adrian Hunter
2020-01-06 11:01 ` [PATCH v4 03/11] mmc: sdhci: add support for using external DMA devices Faiz Abbas
2020-01-08  1:28   ` Baolin Wang
2020-01-08  9:20     ` Faiz Abbas
2020-01-08  9:29       ` Baolin Wang
2020-01-08 13:35         ` Peter Ujfalusi
2020-01-10 13:16           ` Faiz Abbas
2020-01-15 12:01   ` Adrian Hunter
2020-01-06 11:01 ` [PATCH v4 04/11] mmc: sdhci-omap: Add using external dma Faiz Abbas
2020-01-15 12:02   ` Adrian Hunter [this message]
2020-01-06 11:01 ` [PATCH v4 05/11] mmc: sdhci: Convert sdhci_set_timeout_irq() to non-static Faiz Abbas
2020-01-15 12:03   ` Adrian Hunter
2020-01-06 11:01 ` [PATCH v4 06/11] mmc: sdhci: Refactor sdhci_set_timeout() Faiz Abbas
2020-01-15 12:04   ` Adrian Hunter
2020-01-06 11:01 ` [PATCH v4 07/11] mmc: sdhci-omap: Disable data timeout interrupt during erase Faiz Abbas
2020-01-15 12:05   ` Adrian Hunter
2020-01-06 11:01 ` [PATCH v4 08/11] dt-bindings: sdhci-omap: Add documentation for ti,needs-special-reset property Faiz Abbas
2020-01-06 22:03   ` Rob Herring
2020-01-07 11:18     ` Faiz Abbas
2020-01-06 11:01 ` [PATCH v4 09/11] mmc: sdhci-omap: Add " Faiz Abbas
2020-01-15 12:14   ` Adrian Hunter
2020-01-06 11:01 ` [PATCH v4 10/11] dt-bindings: sdhci-omap: Add am335x and am437x specific bindings Faiz Abbas
2020-01-06 11:01 ` [PATCH v4 11/11] mmc: sdhci-omap: Add am335x and am437x specific compatibles Faiz Abbas
2020-01-15 12:14   ` Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8c364afb-2a3a-3b5b-1f97-4c0a60c182b8@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=faiz_abbas@ti.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).