linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core
@ 2019-08-26 12:08 Tudor.Ambarus
  2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
                   ` (21 more replies)
  0 siblings, 22 replies; 50+ messages in thread
From: Tudor.Ambarus @ 2019-08-26 12:08 UTC (permalink / raw)
  To: boris.brezillon, marek.vasut, vigneshr, miquel.raynal, richard,
	linux-mtd, linux-kernel
  Cc: Tudor.Ambarus

From: Tudor Ambarus <tudor.ambarus@microchip.com>

v3:
- Drop patches:
  "mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter'"
  "mtd: spi-nor: Rework the disabling of block write protection"
and replace them with the RFC patch:
  "mtd: spi-nor: Rework the disabling of block write protection"
- rename spi_nor_legacy_init_params() to spi_nor_info_init_params()
- rebase patches and send them all in a single patch set.

v2:
- addressed all the comments
- all flash parameters and settings are now set in 'struct
  spi_nor_flash_parameter', for a clearer separation between the SPI NOR
  layer and the flash params.

In order to test this, you'll have to merge v5.3-rc5 in spi-nor/next.
This patch set depends on
'commit 834de5c1aa76 ("mtd: spi-nor: Fix the disabling of write protection at init")

The scope of the "mtd: spi-nor: move manuf out of the core" batches,
is to move all manufacturer specific code out of the spi-nor core.

In the quest of removing the manufacturer specific code from the spi-nor
core, we want to impose a timeline/priority on how the flash parameters
are updated. As of now. the flash parameters initialization logic is as
following:

    a/ default flash parameters init in spi_nor_init_params()
    b/ manufacturer specific flash parameters updates, split across entire
       spi-nor core code
    c/ flash parameters updates based on SFDP tables
    d/ post BFPT flash parameter updates

With the "mtd: spi-nor: move manuf out of the core" batches, we want to
impose the following sequence of calls:

    1/ spi-nor core legacy flash parameters init:
            spi_nor_default_init_params()

    2/ MFR-based manufacturer flash parameters init:
            nor->manufacturer->fixups->default_init()

    3/ specific flash_info tweeks done when decisions can not be done just
       on MFR:
            nor->info->fixups->default_init()

    4/ SFDP tables flash parameters init - SFDP knows better:
            spi_nor_sfdp_init_params()

    5/ post SFDP tables flash parameters updates - in case manufacturers
       get the serial flash tables wrong or incomplete.
            nor->info->fixups->post_sfdp()
       The later can be extended to nor->manufacturer->fixups->post_sfdp()
       if needed.

Setting of flash parameters will no longer be spread interleaved across
the spi-nor core, there will be a clear separation on who and when will
update the flash parameters.

Tested on sst26vf064b with atmel-quadspi SPIMEM driver.

Boris Brezillon (7):
  mtd: spi-nor: Add a default_init() fixup hook for gd25q256
  mtd: spi-nor: Create a ->set_4byte() method
  mtd: spi-nor: Rework the SPI NOR lock/unlock logic
  mtd: spi-nor: Add post_sfdp() hook to tweak flash config
  mtd: spi-nor: Add spansion_post_sfdp_fixups()
  mtd: spi-nor: Add a ->convert_addr() method
  mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag

Tudor Ambarus (13):
  mtd: spi-nor: Regroup flash parameter and settings
  mtd: spi-nor: Use nor->params
  mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
  mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
  mtd: spi-nor: Add default_init() hook to tweak flash parameters
  mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()
  mtd: spi-nor: Split spi_nor_init_params()
  mtd: spi_nor: Add a ->setup() method
  mtd: spi-nor: Add s3an_post_sfdp_fixups()
  mtd: spi-nor: Bring flash params init together
  mtd: spi_nor: Introduce spi_nor_set_addr_width()
  mtd: spi-nor: Introduce spi_nor_get_flash_info()
  mtd: spi-nor: Rework the disabling of block write protection

 drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------
 include/linux/mtd/spi-nor.h   |  298 +++++++---
 2 files changed, 927 insertions(+), 675 deletions(-)

-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 50+ messages in thread

end of thread, other threads:[~2019-08-28 10:18 UTC | newest]

Thread overview: 50+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27  4:21   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27  4:31   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27  4:47   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:38   ` Boris Brezillon
2019-08-27  5:39   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27  5:54   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27  6:00   ` Vignesh Raghavendra
2019-08-27  7:01     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27  6:07   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27  6:36   ` Vignesh Raghavendra
2019-08-27  6:58     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27  7:08   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:10   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27  7:13   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40   ` Boris Brezillon
2019-08-26 13:38     ` Schrempf Frieder
2019-08-26 14:02       ` Boris Brezillon
2019-08-26 14:37         ` Schrempf Frieder
2019-08-27  7:16   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:18   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-27  7:48   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27  7:35   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49   ` Boris Brezillon
2019-08-27  5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).