linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: <chengzhihao1@huawei.com>
To: <david.oberhollenzer@sigma-star.at>, <richard@nod.at>,
	<boris.brezillon@bootlin.com>, <david@sigma-star.at>,
	<artem.bityutskiy@linux.intel.com>, <yi.zhang@huawei.com>
Cc: chengzhihao1@huawei.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH mtd-utils] ubi-tests: ubi_mkvol_request: Fully initialize 'struct ubi_mkvol_request req'
Date: Fri, 14 Jun 2019 20:14:38 +0800	[thread overview]
Message-ID: <1560514478-54276-1-git-send-email-chengzhihao1@huawei.com> (raw)

From: Zhihao Cheng <chengzhihao1@huawei.com>

'struct ubi_mkvol_request req' is one parameter of the function 'ubi_mkvol'
, this parameter will be passed to kernel and then be checked. It acts as a
local variable in many ubi tests, such as io_basic, io_read, mkvol_bad,
mkvol_basic, etc.

After commit c355aa465fce ("ubi: expose the volume CRC check skip flag") in
linux-stable, 'struct ubi_mkvol_request' supports a new configuration named
'flags', and req.flags will be checked in kernel function
'verify_mkvol_req'. Currently, there is no initialization for req.flags
before 'ubi_mkvol' invoked. So, req.flags can be an arbitrary number passed
to kernel. When we run ubi tests in qemu (x86_64, kernel image: 5.2.0-rc4),
the following errors may occur:

  ======================================================================
  ======================================================================
  ======================================================================
  Test on mtdram, fastmap enabled, VID header offset factor 1
  ======================================================================
  ======================================================================
  ======================================================================
  mtdram: 16MiB, PEB size 16KiB, fastmap enabled
  Running mkvol_basic /dev/ubi0
  Running mkvol_bad /dev/ubi0
  [mkvol_bad] test_mkvol():105: ubi_mkvol failed with error 22
  (Invalid argument), expected 28 (No space left on device)
  [mkvol_bad] test_mkvol():105: bytes = 16060929
  Error: mkvol_bad failed
  FAILURE

This patch fully initializes every 'struct ubi_mkvol_request req' passed to
'ubi_mkvol', which can fix the bug that the ubi test failed caused by that
req.flags was not initialized. And it is still compatible with old kernel
before kernel commit c355aa465fce ("ubi: expose the volume CRC check skip
flag").

----------------------------------------

Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
---
 tests/ubi-tests/integ.c       | 1 +
 tests/ubi-tests/io_basic.c    | 2 ++
 tests/ubi-tests/io_paral.c    | 1 +
 tests/ubi-tests/io_read.c     | 2 ++
 tests/ubi-tests/io_update.c   | 1 +
 tests/ubi-tests/mkvol_bad.c   | 2 ++
 tests/ubi-tests/mkvol_basic.c | 3 +++
 tests/ubi-tests/mkvol_paral.c | 1 +
 tests/ubi-tests/rsvol.c       | 2 ++
 tests/ubi-tests/volrefcnt.c   | 1 +
 10 files changed, 16 insertions(+)

diff --git a/tests/ubi-tests/integ.c b/tests/ubi-tests/integ.c
index 1cd0649..fd38ef5 100644
--- a/tests/ubi-tests/integ.c
+++ b/tests/ubi-tests/integ.c
@@ -467,6 +467,7 @@ static void operate_on_ubi_device(struct ubi_device_info *ubi_device)
 		req.vol_id = UBI_VOL_NUM_AUTO;
 		req.alignment = 1; /* TODO: What is this? */
 		req.bytes = ubi_device->info.leb_size * max_ebs_per_vol;
+		req.flags = 0;
 		if (req.bytes == 0 || req.bytes > ubi_device->info.avail_bytes)
 			req.bytes = ubi_device->info.avail_bytes;
 		req.vol_type = UBI_DYNAMIC_VOLUME;
diff --git a/tests/ubi-tests/io_basic.c b/tests/ubi-tests/io_basic.c
index 3a296b4..288a351 100644
--- a/tests/ubi-tests/io_basic.c
+++ b/tests/ubi-tests/io_basic.c
@@ -55,6 +55,7 @@ static int test_basic(int type)
 	req.bytes = dev_info.avail_bytes;
 	req.vol_type = type;
 	req.name = name;
+	req.flags = 0;
 
 	if (ubi_mkvol(libubi, node, &req)) {
 		failed("ubi_mkvol");
@@ -102,6 +103,7 @@ static int test_aligned(int type)
 
 	req.vol_type = type;
 	req.name = name;
+	req.flags = 0;
 
 	for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
 		req.vol_id = UBI_VOL_NUM_AUTO;
diff --git a/tests/ubi-tests/io_paral.c b/tests/ubi-tests/io_paral.c
index 6c77ec1..4040b3e 100644
--- a/tests/ubi-tests/io_paral.c
+++ b/tests/ubi-tests/io_paral.c
@@ -266,6 +266,7 @@ int main(int argc, char * const argv[])
 		sprintf(vol_name[i], PROGRAM_NAME":%d", i);
 		reqests[i].name = vol_name[i];
 		reqests[i].vol_type = UBI_DYNAMIC_VOLUME;
+		reqests[i].flags = 0;
 		if (i == THREADS_NUM)
 			reqests[i].vol_type = UBI_STATIC_VOLUME;
 		sprintf(vol_nodes[i], UBI_VOLUME_PATTERN, dev_info.dev_num, i);
diff --git a/tests/ubi-tests/io_read.c b/tests/ubi-tests/io_read.c
index f48db67..3100ef1 100644
--- a/tests/ubi-tests/io_read.c
+++ b/tests/ubi-tests/io_read.c
@@ -74,6 +74,7 @@ static int test_static(void)
 	req.bytes = dev_info.avail_bytes;
 	req.vol_type = UBI_STATIC_VOLUME;
 	req.name = name;
+	req.flags = 0;
 
 	if (ubi_mkvol(libubi, node, &req)) {
 		failed("ubi_mkvol");
@@ -329,6 +330,7 @@ static int test_read(int type)
 		req.vol_id = UBI_VOL_NUM_AUTO;
 		req.vol_type = type;
 		req.name = name;
+		req.flags = 0;
 
 		req.alignment = alignments[i];
 		req.alignment -= req.alignment % dev_info.min_io_size;
diff --git a/tests/ubi-tests/io_update.c b/tests/ubi-tests/io_update.c
index fe3ad7b..f48df1d 100644
--- a/tests/ubi-tests/io_update.c
+++ b/tests/ubi-tests/io_update.c
@@ -233,6 +233,7 @@ static int test_update(int type)
 		req.vol_id = UBI_VOL_NUM_AUTO;
 		req.vol_type = type;
 		req.name = name;
+		req.flags = 0;
 
 		req.alignment = alignments[i];
 		req.alignment -= req.alignment % dev_info.min_io_size;
diff --git a/tests/ubi-tests/mkvol_bad.c b/tests/ubi-tests/mkvol_bad.c
index 486fbab..7e46726 100644
--- a/tests/ubi-tests/mkvol_bad.c
+++ b/tests/ubi-tests/mkvol_bad.c
@@ -48,6 +48,7 @@ static int test_mkvol(void)
 	req.bytes = dev_info.avail_bytes;
 	req.vol_type = UBI_DYNAMIC_VOLUME;
 	req.name = name;
+	req.flags = 0;
 
 	/* Bad volume ID */
 	req.vol_id = -2;
@@ -251,6 +252,7 @@ static int test_rmvol(void)
 	req.bytes = dev_info.avail_bytes;
 	req.vol_type = UBI_DYNAMIC_VOLUME;
 	req.name = name;
+	req.flags = 0;
 	if (ubi_mkvol(libubi, node, &req)) {
 		failed("ubi_mkvol");
 		return -1;
diff --git a/tests/ubi-tests/mkvol_basic.c b/tests/ubi-tests/mkvol_basic.c
index 88d115a..c7c6984 100644
--- a/tests/ubi-tests/mkvol_basic.c
+++ b/tests/ubi-tests/mkvol_basic.c
@@ -59,6 +59,7 @@ static int mkvol_alignment(void)
 
 		req.vol_type = UBI_DYNAMIC_VOLUME;
 		req.name = name;
+		req.flags = 0;
 
 		if (ubi_mkvol(libubi, node, &req)) {
 			failed("ubi_mkvol");
@@ -101,6 +102,7 @@ static int mkvol_basic(void)
 	req.bytes = dev_info.avail_bytes;
 	req.vol_type = UBI_DYNAMIC_VOLUME;
 	req.name = name;
+	req.flags = 0;
 
 	if (ubi_mkvol(libubi, node, &req)) {
 		failed("ubi_mkvol");
@@ -170,6 +172,7 @@ static int mkvol_multiple(void)
 		req.alignment = 1;
 		req.bytes = 1;
 		req.vol_type = UBI_STATIC_VOLUME;
+		req.flags = 0;
 
 		sprintf(nm, "%s:%d", name, i);
 		req.name = nm;
diff --git a/tests/ubi-tests/mkvol_paral.c b/tests/ubi-tests/mkvol_paral.c
index 95b5e10..41d5ae0 100644
--- a/tests/ubi-tests/mkvol_paral.c
+++ b/tests/ubi-tests/mkvol_paral.c
@@ -54,6 +54,7 @@ static void * the_thread(void *ptr)
 	req.vol_type = UBI_DYNAMIC_VOLUME;
 	sprintf(nm, "%s:%d", name, n);
 	req.name = nm;
+	req.flags = 0;
 
 	while (iter--) {
 		req.vol_id = UBI_VOL_NUM_AUTO;
diff --git a/tests/ubi-tests/rsvol.c b/tests/ubi-tests/rsvol.c
index 6bfade9..921b36f 100644
--- a/tests/ubi-tests/rsvol.c
+++ b/tests/ubi-tests/rsvol.c
@@ -54,6 +54,7 @@ static int test_basic(int type)
 	req.bytes = MIN_AVAIL_EBS * dev_info.leb_size;
 	req.vol_type = type;
 	req.name = name;
+	req.flags = 0;
 
 	if (ubi_mkvol(libubi, node, &req)) {
 		failed("ubi_mkvol");
@@ -237,6 +238,7 @@ static int test_rsvol(int type)
 		req.vol_id = UBI_VOL_NUM_AUTO;
 		req.vol_type = type;
 		req.name = name;
+		req.flags = 0;
 
 		req.alignment = alignments[i];
 		req.alignment -= req.alignment % dev_info.min_io_size;
diff --git a/tests/ubi-tests/volrefcnt.c b/tests/ubi-tests/volrefcnt.c
index 591a55a..328a8ad 100644
--- a/tests/ubi-tests/volrefcnt.c
+++ b/tests/ubi-tests/volrefcnt.c
@@ -67,6 +67,7 @@ int main(int argc, char * const argv[])
 	req.bytes = dev_info.leb_size;
 	req.vol_type = UBI_DYNAMIC_VOLUME;
 	req.name = "rmvol";
+	req.flags = 0;
 
 	if (ubi_mkvol(libubi, node, &req)) {
 		failed("ubi_mkvol");
-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2019-06-14 12:09 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-14 12:14 chengzhihao1 [this message]
2019-06-17  7:03 ` [PATCH mtd-utils] ubi-tests: ubi_mkvol_request: Fully initialize 'struct ubi_mkvol_request req' David Oberhollenzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560514478-54276-1-git-send-email-chengzhihao1@huawei.com \
    --to=chengzhihao1@huawei.com \
    --cc=artem.bityutskiy@linux.intel.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=david.oberhollenzer@sigma-star.at \
    --cc=david@sigma-star.at \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=yi.zhang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).