linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Yicong Yang <yangyicong@hisilicon.com>
To: <tudor.ambarus@microchip.com>, <linux-mtd@lists.infradead.org>
Cc: vigneshr@ti.com, sergei.shtylyov@cogentembedded.com,
	richard@nod.at, me@yadavpratyush.com, john.garry@huawei.com,
	linuxarm@huawei.com, yangyicong@hisilicon.com,
	alexander.sverdlin@nokia.com, miquel.raynal@bootlin.com
Subject: [RFC PATCH v2 1/2] mtd: spi-nor: Add capability to disable flash quad mode
Date: Tue, 12 May 2020 19:26:58 +0800	[thread overview]
Message-ID: <1589282819-42358-2-git-send-email-yangyicong@hisilicon.com> (raw)
In-Reply-To: <1589282819-42358-1-git-send-email-yangyicong@hisilicon.com>

Previous we didn't provide a way to disable the flash's quad mode.
Which means we cannot do some cleanup works when to remove or
poweroff the flash, like what set 4-byte address mode does in
spi_nor_restore().

Add the capability to disable the flash quad mode, by introducing
an enable flag in the flash parameters quad_enable() hooks and
related functions.

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
---
 drivers/mtd/spi-nor/core.c | 53 ++++++++++++++++++++++++++++++++--------------
 drivers/mtd/spi-nor/core.h |  8 +++----
 2 files changed, 41 insertions(+), 20 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index cc68ea8..72e8d8b 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1907,15 +1907,17 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 }
 
 /**
- * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
+ * spi_nor_sr1_bit6_quad_enable() - Set/Unset the Quad Enable BIT(6) in the
+ *                                  Status
  * Register 1.
  * @nor:	pointer to a 'struct spi_nor'
+ * @enable:	true to enter quad mode. false to leave quad mode.
  *
  * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
  *
  * Return: 0 on success, -errno otherwise.
  */
-int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor, bool enable)
 {
 	int ret;
 
@@ -1923,45 +1925,59 @@ int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
 	if (ret)
 		return ret;
 
-	if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
+	if ((enable && (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)) ||
+	    !(enable || (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)))
 		return 0;
 
-	nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
+	if (enable)
+		nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
+	else
+		nor->bouncebuf[0] &= ~SR1_QUAD_EN_BIT6;
 
 	return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
 }
 
 /**
- * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
+ * spi_nor_sr2_bit1_quad_enable() - set/unset the Quad Enable BIT(1) in the
+ *                                  Status
  * Register 2.
  * @nor:       pointer to a 'struct spi_nor'.
+ * @enable:	true to enter quad mode. false to leave quad mode.
  *
  * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
  *
  * Return: 0 on success, -errno otherwise.
  */
-int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor, bool enable)
 {
 	int ret;
 
 	if (nor->flags & SNOR_F_NO_READ_CR)
-		return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
+		return spi_nor_write_16bit_cr_and_check(nor,
+						enable ? SR2_QUAD_EN_BIT1 : 0);
 
 	ret = spi_nor_read_cr(nor, nor->bouncebuf);
 	if (ret)
 		return ret;
 
-	if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
+	if ((enable && (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)) ||
+	    !(enable || (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)))
 		return 0;
 
 	nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
 
+	if (enable)
+		nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
+	else
+		nor->bouncebuf[0] &= ~SR2_QUAD_EN_BIT1;
+
 	return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
 }
 
 /**
- * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
+ * spi_nor_sr2_bit7_quad_enable() - set/unset QE bit in Status Register 2.
  * @nor:	pointer to a 'struct spi_nor'
+ * @enable:	true to enter quad mode. false to leave quad mode.
  *
  * Set the Quad Enable (QE) bit in the Status Register 2.
  *
@@ -1971,7 +1987,7 @@ int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
  *
  * Return: 0 on success, -errno otherwise.
  */
-int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor, bool enable)
 {
 	u8 *sr2 = nor->bouncebuf;
 	int ret;
@@ -1981,11 +1997,15 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
 	ret = spi_nor_read_sr2(nor, sr2);
 	if (ret)
 		return ret;
-	if (*sr2 & SR2_QUAD_EN_BIT7)
+	if ((enable && (*sr2 & SR2_QUAD_EN_BIT7)) ||
+	    !(enable || (*sr2 & SR2_QUAD_EN_BIT7)))
 		return 0;
 
 	/* Update the Quad Enable bit. */
-	*sr2 |= SR2_QUAD_EN_BIT7;
+	if (enable)
+		*sr2 |= SR2_QUAD_EN_BIT7;
+	else
+		*sr2 &= ~SR2_QUAD_EN_BIT7;
 
 	ret = spi_nor_write_sr2(nor, sr2);
 	if (ret)
@@ -2898,12 +2918,13 @@ static int spi_nor_init_params(struct spi_nor *nor)
 }
 
 /**
- * spi_nor_quad_enable() - enable Quad I/O if needed.
+ * spi_nor_quad_enable() - enable/disable Quad I/O if needed.
  * @nor:                pointer to a 'struct spi_nor'
+ * @enable:             true to enable quad mode. false to disable.
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_quad_enable(struct spi_nor *nor)
+static int spi_nor_quad_enable(struct spi_nor *nor, bool enable)
 {
 	if (!nor->params->quad_enable)
 		return 0;
@@ -2912,7 +2933,7 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
 	      spi_nor_get_protocol_width(nor->write_proto) == 4))
 		return 0;
 
-	return nor->params->quad_enable(nor);
+	return nor->params->quad_enable(nor, enable);
 }
 
 /**
@@ -2936,7 +2957,7 @@ static int spi_nor_init(struct spi_nor *nor)
 {
 	int err;
 
-	err = spi_nor_quad_enable(nor);
+	err = spi_nor_quad_enable(nor, true);
 	if (err) {
 		dev_dbg(nor->dev, "quad mode not supported\n");
 		return err;
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 6f2f6b2..719a31d 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -219,7 +219,7 @@ struct spi_nor_flash_parameter {
 
 	struct spi_nor_erase_map        erase_map;
 
-	int (*quad_enable)(struct spi_nor *nor);
+	int (*quad_enable)(struct spi_nor *nor, bool enable);
 	int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
 	u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
 	int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
@@ -406,9 +406,9 @@ int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
 int spi_nor_wait_till_ready(struct spi_nor *nor);
 int spi_nor_lock_and_prep(struct spi_nor *nor);
 void spi_nor_unlock_and_unprep(struct spi_nor *nor);
-int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
-int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
-int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor, bool enable);
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor, bool enable);
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor, bool enable);
 
 int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
 ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
-- 
2.8.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-05-12 11:28 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-12 11:26 [RFC PATCH v2 0/2] Add support to Disable the flash quad mode Yicong Yang
2020-05-12 11:26 ` Yicong Yang [this message]
2020-06-15 10:53   ` [RFC PATCH v2 1/2] mtd: spi-nor: Add capability to disable " Pratyush Yadav
2020-06-16  7:10     ` Yicong Yang
2020-05-12 11:26 ` [RFC PATCH v2 2/2] mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() Yicong Yang
2020-06-15 10:56   ` Pratyush Yadav
2020-06-15  9:19 ` [RFC PATCH v2 0/2] Add support to Disable the flash quad mode Yicong Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589282819-42358-2-git-send-email-yangyicong@hisilicon.com \
    --to=yangyicong@hisilicon.com \
    --cc=alexander.sverdlin@nokia.com \
    --cc=john.garry@huawei.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linuxarm@huawei.com \
    --cc=me@yadavpratyush.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).