[PATCH 10/11] arm64: dts: imx8ulp: add flexspi support

From: haibo.chen@nxp.com
To: ashish.kumar@nxp.com, yogeshgaur.83@gmail.com,
	broonie@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, han.xu@nxp.com,
	singh.kuldeep87k@gmail.com, tudor.ambarus@microchip.com,
	p.yadav@ti.com, michael@walle.cc, miquel.raynal@bootlin.com,
	richard@nod.at, vigneshr@ti.com, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-mtd@lists.infradead.org,
	festevam@gmail.com, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org, haibo.chen@nxp.com,
	zhengxunli@mxic.com.tw
Subject: [PATCH 10/11] arm64: dts: imx8ulp: add flexspi support
Date: Tue,  5 Jul 2022 17:11:42 +0800	[thread overview]
Message-ID: <1657012303-6464-10-git-send-email-haibo.chen@nxp.com> (raw)
In-Reply-To: <1657012303-6464-1-git-send-email-haibo.chen@nxp.com>

From: Haibo Chen <haibo.chen@nxp.com>

Add flexspi support, and enable the 8 bit TX/RX for the
mx25uw51345gxdi00 spi-nor flash.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 34 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi    | 20 ++++++++++-
 2 files changed, 53 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 33e84c4e9ed8..69209b87d432 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -21,6 +21,23 @@ memory@80000000 {
 	};
 };
 
+&flexspi2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexspi2_ptd>;
+	pinctrl-1 = <&pinctrl_flexspi2_ptd>;
+	status = "okay";
+
+	mx25uw51345gxdi00: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &lpuart5 {
 	/* console */
 	pinctrl-names = "default", "sleep";
@@ -39,6 +56,23 @@ &usdhc0 {
 };
 
 &iomuxc1 {
+	pinctrl_flexspi2_ptd: flexspi2ptdgrp {
+		fsl,pins = <
+
+			MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B	0x42
+			MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK	0x42
+			MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3	0x42
+			MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2	0x42
+			MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1	0x42
+			MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0	0x42
+			MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS	0x42
+			MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7	0x42
+			MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6	0x42
+			MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5	0x42
+			MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4	0x42
+		>;
+	};
+
 	pinctrl_lpuart5: lpuart5grp {
 		fsl,pins = <
 			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 09f7364dd1d0..4f92c4d6e8c0 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -141,7 +141,8 @@ soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0x40000000>;
+		ranges = <0x0 0x0 0x0 0x40000000>,
+			 <0x60000000 0x0 0x60000000 0x1000000>;
 
 		per_bridge3: bus@29000000 {
 			compatible = "simple-bus";
@@ -272,6 +273,23 @@ pcc4: clock-controller@29800000 {
 				#clock-cells = <1>;
 			};
 
+			flexspi2: spi@29810000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>,
+					 <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				clock-names = "fspi", "fspi_en";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV1>;
+				status = "disabled";
+			};
+
+
+
 			lpi2c6: i2c@29840000 {
 				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x29840000 0x10000>;
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
