Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Mason Yang <masonccyang@mxic.com.tw>, <broonie@kernel.org>,
	<miquel.raynal@bootlin.com>, <richard@nod.at>,
	<marek.vasut@gmail.com>, <dwmw2@infradead.org>,
	<computersforpeace@gmail.com>, <bbrezillon@kernel.org>,
	<tudor.ambarus@microchip.com>
Cc: juliensu@mxic.com.tw,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-spi@vger.kernel.org
Subject: Re: [PATCH 3/4] mtd: spi-nor: Add Octal 8D-8D-8D mode support for Macronix mx25uw51245g
Date: Wed, 4 Dec 2019 18:33:49 +0530
Message-ID: <1f1a368a-e3d3-4e58-819e-b4dffc3212ef@ti.com> (raw)
In-Reply-To: <1573808288-19365-4-git-send-email-masonccyang@mxic.com.tw>



On 15/11/19 2:28 pm, Mason Yang wrote:
> mx25uw51245g is a SPI NOR that supports 1-1-1/8-8-8 mode and the SFDPRD
> command but returns an empty SFDP page. This forces us to add a new entry
> in the flash_info table and patch spi_nor_fixups hooks to tweak flash
> parameters for spi_nor_read/pp_setting() and then to enter
> Octal 8D-8D-8D modes.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 114 ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mtd/spi-nor.h   |   3 ++
>  2 files changed, 117 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 4cdf52d..9013590 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -615,6 +615,56 @@ static int write_disable(struct spi_nor *nor)
>  }
>  
>  /*
> + * Read configuration register 2, returning its value in the
> + * location. Return the configuration register 2 value.
> + * Returns negative if error occurred.
> + */
> +static int read_cr2(struct spi_nor *nor, u32 addr)

Please prefix spi_nor_* for all new functions. 
Also, include manf name if its vendor specific.

> +{
> +	int ret;
> +
> +	if (nor->spimem) {
> +		struct spi_mem_op op =
> +			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR2, 1),
> +				   SPI_MEM_OP_ADDR(4, addr, 1),
> +				   SPI_MEM_OP_DUMMY(4, 1),
> +				   SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1));
> +
> +		if (spi_nor_protocol_is_8_8_8(nor->read_proto)) {
> +			op.cmd.buswidth = 8;
> +			op.addr.buswidth = 8;
> +			op.dummy.buswidth = 8;
> +			op.data.buswidth = 8;
> +			op.cmd.nbytes = 2;
> +
> +			if (spi_nor_protocol_is_8D_8D_8D(nor->read_proto)) {
> +				op.dummy.nbytes *= 2;
> +				op.cmd.dtr = true;
> +				op.addr.dtr = true;
> +				op.dummy.dtr = true;
> +				op.data.dtr = true;
> +			}
> +
> +			if (nor->ext_cmd_mode == EXT_CMD_IS_INVERSE)
> +				op.cmd.ext_opcode = ~SPINOR_OP_RDCR2;
> +			else
> +				op.cmd.ext_opcode = SPINOR_OP_RDCR2;
> +		}
> +
> +		ret = spi_mem_exec_op(nor->spimem, &op);
> +	} else {
> +		ret = -ENOTSUPP;
> +	}
> +
> +	if (ret < 0) {
> +		dev_err(nor->dev, "error %d reading CR\n", ret);
> +		return ret;
> +	}
> +
> +	return nor->bouncebuf[0];
> +}
> +
> +/*
>   * Write configuration register 2 one byte
>   * Returns negative if error occurred.
>   */
> @@ -2275,10 +2325,72 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
>  	return 0;
>  }
>  
> +static void
> +spi_nor_set_read_settings(struct spi_nor_read_command *read,
> +			  u8 num_mode_clocks,
> +			  u8 num_wait_states,
> +			  u8 opcode,
> +			  enum spi_nor_protocol proto);
> +
> +static void
> +spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
> +			u8 opcode,
> +			enum spi_nor_protocol proto);
> +
> +static void
> +mx25uw51245g_default_init(struct spi_nor *nor)
> +{
> +	struct spi_nor_flash_parameter *params = &nor->params;
> +
> +	if (!(nor->spimem->spi->mode & (SPI_RX_OCTAL | SPI_TX_OCTAL)))
> +		return;
> +
> +	/* Octal 8S-8S-8S mode */
> +	params->hwcaps.mask |= SNOR_HWCAPS_OPI_FULL_STR;
> +	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8_8_8],
> +				  0, 20, SPINOR_OP_READ_8_8_8,
> +				  SNOR_PROTO_8_8_8);
> +
> +	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8_8_8],
> +				SPINOR_OP_PP_8_8_8, SNOR_PROTO_8_8_8);
> +
> +	/* Octal 8D-8D-8D mode */
> +	params->hwcaps.mask |= SNOR_HWCAPS_OPI_FULL_DTR;
> +	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8D_8D_8D],
> +				  0, 20, SPINOR_OP_READ_8D_8D_8D,
> +				  SNOR_PROTO_8_8_8_DTR);
> +
> +	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8D_8D_8D],
> +				SPINOR_OP_PP_8D_8D_8D, SNOR_PROTO_8_8_8_DTR);
> +
> +	nor->ext_cmd_mode = EXT_CMD_IS_INVERSE;
> +}

I don't see anything that is macronix specific here.. Can this be moved to
generic code with information parsed from SFDP table?

> +
> +static void
> +mx25uw51245g_post_sfdp_fixups(struct spi_nor *nor)
> +{
> +	struct spi_nor_flash_parameter *params = &nor->params;
> +	u8 cr2;
> +
> +	cr2 = read_cr2(nor, CR2_REG0) & CR2_REG0_MODE_MASK;
> +
> +	if (params->hwcaps.mask & SNOR_HWCAPS_OPI_FULL_DTR)
> +		cr2 |= CR2_REG0_MODE_OPI_DTR;
> +	else if (params->hwcaps.mask & SNOR_HWCAPS_OPI_FULL_STR)
> +		cr2 |= CR2_REG0_MODE_OPI_STR;
> +
> +	write_cr2(nor, CR2_REG0, cr2);
> +}
> +

I see this as a misuse of sfdp_fixups hook:

 * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
 *             that do not support RDSFDP). Typically used to tweak various
 *             parameters that could not be extracted by other means (i.e.
 *             when information provided by the SFDP/flash_info tables are
 *             incomplete or wrong).
 *


This should only tweak options parsed by SFDP and not be used to
configure flash to a different mode. Please add a separate function 
to do so. See https://patchwork.kernel.org/patch/10638085/

Also, I guess JESD216C provides a way to discover command sequence 
to enter OPI mode?

>  static struct spi_nor_fixups mx25l25635_fixups = {
>  	.post_bfpt = mx25l25635_post_bfpt_fixups,
>  };
>  
> +static struct spi_nor_fixups mx25uw51245g_fixups = {
> +	.default_init = mx25uw51245g_default_init,
> +	.post_sfdp = mx25uw51245g_post_sfdp_fixups,
> +};
> +
>  static void gd25q256_default_init(struct spi_nor *nor)
>  {
>  	/*
> @@ -2442,6 +2554,8 @@ static void gd25q256_default_init(struct spi_nor *nor)
>  			 SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
>  			 .fixups = &mx25l25635_fixups },
>  	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
> +	{ "mx25uw51245g", INFO(0xc2813a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_4B_OPCODES)
> +				.fixups = &mx25uw51245g_fixups},
>  	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
>  			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>  	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index 2e720ca..3aa54dd 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -114,6 +114,9 @@
>  /* Write CFG Reg 2 - defined in JEDEC JESD216C. */
>  #define SPINOR_OP_WRCR2		0x72	/* Write configuration register 2 */
>  
> +/* Used for Macronix flashes only */
> +#define SPINOR_OP_RDCR2		0x71	/* Read configuration register 2 */
> +
>  /* Used for Macronix and Winbond flashes. */
>  #define SPINOR_OP_EN4B		0xb7	/* Enter 4-byte mode */
>  #define SPINOR_OP_EX4B		0xe9	/* Exit 4-byte mode */
> 

-- 
Regards
Vignesh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-15  8:58 [PATCH 0/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode Mason Yang
2019-11-15  8:58 ` [PATCH 1/4] spi: spi-mem: " Mason Yang
2019-11-15  8:58 ` [PATCH 2/4] mtd: spi-nor: " Mason Yang
2019-11-15 12:30   ` kbuild test robot
2019-11-15 13:42   ` kbuild test robot
2019-12-04 12:46   ` Vignesh Raghavendra
2019-11-15  8:58 ` [PATCH 3/4] mtd: spi-nor: Add Octal 8D-8D-8D mode support for Macronix mx25uw51245g Mason Yang
2019-12-04 13:03   ` Vignesh Raghavendra [this message]
2019-11-15  8:58 ` [PATCH 4/4] spi: mxic: Add support for Octal 8D-8D-8D mode Mason Yang
2019-11-15 14:39   ` kbuild test robot
2019-11-16  7:20   ` kbuild test robot

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1f1a368a-e3d3-4e58-819e-b4dffc3212ef@ti.com \
    --to=vigneshr@ti.com \
    --cc=bbrezillon@kernel.org \
    --cc=boris.brezillon@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=juliensu@mxic.com.tw \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=marek.vasut@gmail.com \
    --cc=masonccyang@mxic.com.tw \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git