From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: Alban Bedel <albeu@free.fr>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
linux-mtd@lists.infradead.org
Subject: [PATCH] drivers/mtd: Fix device registration error
Date: Tue, 5 Feb 2019 14:35:47 +0530 [thread overview]
Message-ID: <20190205090547.8418-1-aneesh.kumar@linux.ibm.com> (raw)
This change helps me to get multiple mtd device registered. Without this
I get
sysfs: cannot create duplicate filename '/bus/nvmem/devices/flash0'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2-00557-g1ef20ef21f22 #13
Call Trace:
[c0000000b38e3220] [c000000000b58fe4] dump_stack+0xe8/0x164 (unreliable)
[c0000000b38e3270] [c0000000004cf074] sysfs_warn_dup+0x84/0xb0
[c0000000b38e32f0] [c0000000004cf6c4] sysfs_do_create_link_sd.isra.0+0x114/0x150
[c0000000b38e3340] [c000000000726a84] bus_add_device+0x94/0x1e0
[c0000000b38e33c0] [c0000000007218f0] device_add+0x4d0/0x830
[c0000000b38e3480] [c0000000009d54a8] nvmem_register.part.2+0x1c8/0xb30
[c0000000b38e3560] [c000000000834530] mtd_nvmem_add+0x90/0x120
[c0000000b38e3650] [c000000000835bc8] add_mtd_device+0x198/0x4e0
[c0000000b38e36f0] [c00000000083619c] mtd_device_parse_register+0x11c/0x280
[c0000000b38e3780] [c000000000840830] powernv_flash_probe+0x180/0x250
[c0000000b38e3820] [c00000000072c120] platform_drv_probe+0x60/0xf0
[c0000000b38e38a0] [c0000000007283c8] really_probe+0x138/0x4d0
[c0000000b38e3930] [c000000000728acc] driver_probe_device+0x13c/0x1b0
[c0000000b38e39b0] [c000000000728c7c] __driver_attach+0x13c/0x1c0
[c0000000b38e3a30] [c000000000725130] bus_for_each_dev+0xa0/0x120
[c0000000b38e3a90] [c000000000727b2c] driver_attach+0x2c/0x40
[c0000000b38e3ab0] [c0000000007270f8] bus_add_driver+0x228/0x360
[c0000000b38e3b40] [c00000000072a2e0] driver_register+0x90/0x1a0
[c0000000b38e3bb0] [c00000000072c020] __platform_driver_register+0x50/0x70
[c0000000b38e3bd0] [c00000000105c984] powernv_flash_driver_init+0x24/0x38
[c0000000b38e3bf0] [c000000000010904] do_one_initcall+0x84/0x464
[c0000000b38e3cd0] [c000000001004548] kernel_init_freeable+0x530/0x634
[c0000000b38e3db0] [c000000000011154] kernel_init+0x1c/0x168
[c0000000b38e3e20] [c00000000000bed4] ret_from_kernel_thread+0x5c/0x68
mtd mtd1: Failed to register NVMEM device
With the change we now have
/sys/bus/nvmem/devices# ls -al
total 0
drwxr-xr-x 2 root root 0 Feb 5 12:21 .
drwxr-xr-x 4 root root 0 Feb 5 12:21 ..
lrwxrwxrwx 1 root root 0 Feb 5 12:21 flash0 -> ../../../devices/platform/ibm,opal:flash@0/mtd/mtd0/flash0
lrwxrwxrwx 1 root root 0 Feb 5 12:21 flash1 -> ../../../devices/platform/ibm,opal:flash@1/mtd/mtd1/flash1
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
drivers/mtd/mtdcore.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 999b705769a8..90035da3423c 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -503,10 +503,11 @@ static int mtd_nvmem_reg_read(void *priv, unsigned int offset,
return retlen == bytes ? 0 : -EIO;
}
-static int mtd_nvmem_add(struct mtd_info *mtd)
+static int mtd_nvmem_add(struct mtd_info *mtd, int i)
{
struct nvmem_config config = {};
+ config.id = i;
config.dev = &mtd->dev;
config.name = mtd->name;
config.owner = THIS_MODULE;
@@ -616,7 +617,7 @@ int add_mtd_device(struct mtd_info *mtd)
goto fail_added;
/* Add the nvmem provider */
- error = mtd_nvmem_add(mtd);
+ error = mtd_nvmem_add(mtd, i);
if (error)
goto fail_nvmem_add;
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2019-02-05 9:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-05 9:05 Aneesh Kumar K.V [this message]
2019-02-05 22:48 ` [PATCH] drivers/mtd: Fix device registration error Boris Brezillon
2019-02-06 4:52 ` Aneesh Kumar K.V
2019-02-06 6:40 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190205090547.8418-1-aneesh.kumar@linux.ibm.com \
--to=aneesh.kumar@linux.ibm.com \
--cc=albeu@free.fr \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).