Re: [PATCH] mtd: rawnand: gpmi: fix MX28 bus master lockup problem

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Martin Kepplinger <martink@posteo.de>
Cc: bbrezillon@kernel.org,
	Manfred Schlaegl <manfred.schlaegl@ginzinger.com>,
	richard@nod.at,
	Martin Kepplinger <martin.kepplinger@ginzinger.com>,
	linux-kernel@vger.kernel.org, marek.vasut@gmail.com,
	linux-mtd@lists.infradead.org, han.xu@nxp.com,
	computersforpeace@gmail.com, dwmw2@infradead.org
Subject: Re: [PATCH] mtd: rawnand: gpmi: fix MX28 bus master lockup problem
Date: Tue, 5 Feb 2019 13:59:46 +0100	[thread overview]
Message-ID: <20190205135946.64eda55c@xps13> (raw)
In-Reply-To: <20190129153700.18717-1-martink@posteo.de>

Hi Martin,

Martin Kepplinger <martink@posteo.de> wrote on Tue, 29 Jan 2019
16:37:00 +0100:

> From: Martin Kepplinger <martin.kepplinger@ginzinger.com>
> 
> Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft
> reset may cause bus master lock up") for MX28 too. It has the same
> problem.
> 
> Observed problem: once per 100,000+ MX28 reboots NAND read failed on
> DMA timeout errors:
> [    1.770823] UBI: attaching mtd3 to ubi0
> [    2.768088] gpmi_nand: DMA timeout, last DMA :1
> [    3.958087] gpmi_nand: BCH timeout, last DMA :1
> [    4.156033] gpmi_nand: Error in ECC-based read: -110
> [    4.161136] UBI warning: ubi_io_read: error -110 while reading 64
> bytes from PEB 0:0, read only 0 bytes, retry
> [    4.171283] step 1 error
> [    4.173846] gpmi_nand: Chip: 0, Error -1
> 
> Without BCH soft reset we successfully executed 1,000,000 MX28 reboots.
> 
> I have a quote from NXP regarding this problem, from July 18th 2016:
> 
> "As the i.MX23 and i.MX28 are of the same generation, they share many
> characteristics. Unfortunately, also the erratas may be shared.
> In case of the documented erratas and the workarounds, you can also
> apply the workaround solution of one device on the other one. This have
> been reported, but I’m afraid that there are not an estimated date for
> updating the Errata documents.
> Please accept our apologies for any inconveniences this may cause."
> 
> Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
> ---
> 
> This is something we have in our tree for years and is running on
> production systems and I hope that this helps others too.
> 
> thanks
>                               martin

Thanks for sharing this.

On my side the patch looks ok, maybe an Acked-by from Han would be
great?

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris, do you want to take this? If you don't have more fixes to send I
can queue it to nand/next.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/