From: Boris Brezillon <bbrezillon@kernel.org>
To: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Cc: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>,
richard@nod.at, linux-kernel@vger.kernel.org,
stable@vger.kernel.org, marek.vasut@gmail.com,
linux-mtd@lists.infradead.org, Fabio Estevam <festevam@gmail.com>,
miquel.raynal@bootlin.com, han.xu@nxp.com,
computersforpeace@gmail.com, dwmw2@infradead.org
Subject: Re: [PATCH v2] mtd: rawnand: gpmi: fix MX28 bus master lockup problem
Date: Wed, 6 Feb 2019 09:42:26 +0100 [thread overview]
Message-ID: <20190206094226.1dadbf61@kernel.org> (raw)
In-Reply-To: <20190205155251.18733-1-martin.kepplinger@ginzinger.com>
Hi Martin,
On Tue, 5 Feb 2019 16:52:51 +0100
Martin Kepplinger <martin.kepplinger@ginzinger.com> wrote:
> Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft
> reset may cause bus master lock up") for MX28 too. It has the same
> problem.
>
> Observed problem: once per 100,000+ MX28 reboots NAND read failed on
> DMA timeout errors:
> [ 1.770823] UBI: attaching mtd3 to ubi0
> [ 2.768088] gpmi_nand: DMA timeout, last DMA :1
> [ 3.958087] gpmi_nand: BCH timeout, last DMA :1
> [ 4.156033] gpmi_nand: Error in ECC-based read: -110
> [ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64
> bytes from PEB 0:0, read only 0 bytes, retry
> [ 4.171283] step 1 error
> [ 4.173846] gpmi_nand: Chip: 0, Error -1
>
> Without BCH soft reset we successfully executed 1,000,000 MX28 reboots.
>
> I have a quote from NXP regarding this problem, from July 18th 2016:
>
> "As the i.MX23 and i.MX28 are of the same generation, they share many
> characteristics. Unfortunately, also the erratas may be shared.
> In case of the documented erratas and the workarounds, you can also
> apply the workaround solution of one device on the other one. This have
> been reported, but I’m afraid that there are not an estimated date for
> updating the Errata documents.
> Please accept our apologies for any inconveniences this may cause."
>
> Fixes: 6f2a6a52560a ("mtd: nand: gpmi: reset BCH earlier, too, to avoid
> NAND startup problems")
Please make sure this Fixes line is not wrapped next time.
Thanks,
Boris
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
prev parent reply other threads:[~2019-02-06 8:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-05 15:52 [PATCH v2] mtd: rawnand: gpmi: fix MX28 bus master lockup problem Martin Kepplinger
2019-02-05 16:28 ` Han Xu
2019-02-06 8:35 ` [v2] " Boris Brezillon
2019-02-06 8:42 ` Boris Brezillon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190206094226.1dadbf61@kernel.org \
--to=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=festevam@gmail.com \
--cc=han.xu@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=manfred.schlaegl@ginzinger.com \
--cc=marek.vasut@gmail.com \
--cc=martin.kepplinger@ginzinger.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).