From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Tudor Ambarus <Tudor.Ambarus@microchip.com>
Cc: Vignesh R <vigneshr@ti.com>,
Tudor Ambarus <tudor.ambarus@microchip.com>,
Julien Su <juliensu@mxic.com.tw>,
linux-mtd@lists.infradead.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Mason Yang <masonccyang@mxic.com.tw>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] mtd: rawnand: 6th batch of cleanups
Date: Thu, 21 Feb 2019 10:27:27 +0100 [thread overview]
Message-ID: <20190221092734.21634-1-miquel.raynal@bootlin.com> (raw)
Hello,
This is a small preparation series focused on Makefile/Kconfig
files. The goal is to clarify what is compiled in the NAND subsystem,
raw NAND controller drivers, SPI-NAND controllers and soon ECC
engines. Please have a look with a menuconfig at the new presentation,
I feel it is much more readable and understandable. More changes will
come in these Kconfig files when adding the ECC engine generic layer.
Regards,
Miquèl
Miquel Raynal (6):
mtd: nand: omap: Fix comment in platform data using wrong Kconfig
symbol
mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm
mtd: nand: Clarify Kconfig entry for software Hamming ECC entries
mtd: rawnand: Change Kconfig titles and re-order a bit the list
mtd: rawnand: Clarify Kconfig entry MTD_NAND
mtd: nand: Remove useless line in Kconfig
arch/arm/configs/at91_dt_defconfig | 2 +-
arch/arm/configs/clps711x_defconfig | 2 +-
arch/arm/configs/cm_x2xx_defconfig | 2 +-
arch/arm/configs/cm_x300_defconfig | 2 +-
arch/arm/configs/colibri_pxa270_defconfig | 2 +-
arch/arm/configs/corgi_defconfig | 2 +-
arch/arm/configs/davinci_all_defconfig | 2 +-
arch/arm/configs/em_x270_defconfig | 2 +-
arch/arm/configs/ep93xx_defconfig | 2 +-
arch/arm/configs/eseries_pxa_defconfig | 2 +-
arch/arm/configs/imx_v4_v5_defconfig | 2 +-
arch/arm/configs/imx_v6_v7_defconfig | 2 +-
arch/arm/configs/ixp4xx_defconfig | 2 +-
arch/arm/configs/keystone_defconfig | 2 +-
arch/arm/configs/lpc32xx_defconfig | 2 +-
arch/arm/configs/macronix_zynq_defconfig | 2 +-
arch/arm/configs/mini2440_defconfig | 2 +-
arch/arm/configs/mmp2_defconfig | 2 +-
arch/arm/configs/multi_v4t_defconfig | 2 +-
arch/arm/configs/multi_v5_defconfig | 2 +-
arch/arm/configs/multi_v7_defconfig | 2 +-
arch/arm/configs/mv78xx0_defconfig | 2 +-
arch/arm/configs/mvebu_v5_defconfig | 2 +-
arch/arm/configs/mvebu_v7_defconfig | 2 +-
arch/arm/configs/mxs_defconfig | 2 +-
arch/arm/configs/nhk8815_defconfig | 4 +-
arch/arm/configs/omap1_defconfig | 2 +-
arch/arm/configs/omap2plus_defconfig | 4 +-
arch/arm/configs/orion5x_defconfig | 2 +-
arch/arm/configs/oxnas_v6_defconfig | 2 +-
arch/arm/configs/pxa3xx_defconfig | 2 +-
arch/arm/configs/pxa_defconfig | 4 +-
arch/arm/configs/qcom_defconfig | 2 +-
arch/arm/configs/raumfeld_defconfig | 2 +-
arch/arm/configs/s3c2410_defconfig | 2 +-
arch/arm/configs/s3c6400_defconfig | 2 +-
arch/arm/configs/sama5_defconfig | 2 +-
arch/arm/configs/socfpga_defconfig | 2 +-
arch/arm/configs/spear13xx_defconfig | 2 +-
arch/arm/configs/spear3xx_defconfig | 2 +-
arch/arm/configs/spear6xx_defconfig | 2 +-
arch/arm/configs/spitz_defconfig | 2 +-
arch/arm/configs/tango4_defconfig | 2 +-
arch/arm/configs/trizeps4_defconfig | 2 +-
arch/arm/configs/u300_defconfig | 2 +-
arch/arm64/configs/defconfig | 2 +-
arch/mips/configs/bcm47xx_defconfig | 2 +-
arch/mips/configs/ci20_defconfig | 2 +-
arch/mips/configs/db1xxx_defconfig | 4 +-
.../configs/generic/board-ni169445.config | 6 +-
arch/mips/configs/generic/board-ocelot.config | 2 +-
arch/mips/configs/loongson1b_defconfig | 2 +-
arch/mips/configs/loongson1c_defconfig | 2 +-
arch/mips/configs/qi_lb60_defconfig | 2 +-
arch/mips/configs/rb532_defconfig | 2 +-
arch/mips/configs/rbtx49xx_defconfig | 2 +-
arch/mips/configs/xway_defconfig | 2 +-
arch/powerpc/configs/40x/kilauea_defconfig | 2 +-
arch/powerpc/configs/40x/obs600_defconfig | 2 +-
.../powerpc/configs/44x/canyonlands_defconfig | 2 +-
arch/powerpc/configs/44x/eiger_defconfig | 2 +-
arch/powerpc/configs/44x/sequoia_defconfig | 2 +-
arch/powerpc/configs/44x/warp_defconfig | 2 +-
.../configs/83xx/mpc8313_rdb_defconfig | 2 +-
.../configs/83xx/mpc8315_rdb_defconfig | 2 +-
arch/powerpc/configs/85xx-hw.config | 2 +-
arch/powerpc/configs/85xx/ge_imp3a_defconfig | 2 +-
arch/powerpc/configs/85xx/socrates_defconfig | 2 +-
arch/powerpc/configs/85xx/tqm8548_defconfig | 4 +-
.../configs/85xx/xes_mpc85xx_defconfig | 2 +-
arch/powerpc/configs/86xx-hw.config | 2 +-
arch/powerpc/configs/mpc512x_defconfig | 2 +-
arch/powerpc/configs/mpc83xx_defconfig | 2 +-
arch/powerpc/configs/pasemi_defconfig | 2 +-
arch/powerpc/configs/ppc44x_defconfig | 2 +-
arch/sh/configs/ap325rxa_defconfig | 2 +-
arch/sh/configs/ecovec24_defconfig | 2 +-
arch/sh/configs/migor_defconfig | 2 +-
arch/sh/configs/sdk7786_defconfig | 2 +-
arch/sh/configs/titan_defconfig | 2 +-
drivers/mtd/Kconfig | 3 +-
drivers/mtd/devices/Kconfig | 2 +-
drivers/mtd/nand/Kconfig | 1 -
drivers/mtd/nand/raw/Kconfig | 385 +++++++++---------
drivers/mtd/nand/raw/Makefile | 6 +-
drivers/mtd/nand/raw/nand_base.c | 4 +-
drivers/mtd/nand/raw/omap2.c | 4 +-
drivers/mtd/sm_ftl.c | 12 +-
drivers/mtd/tests/mtd_nandecctest.c | 16 +-
include/linux/mtd/nand_bch.h | 6 +-
include/linux/platform_data/elm.h | 2 +-
91 files changed, 305 insertions(+), 310 deletions(-)
--
2.19.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2019-02-21 9:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-21 9:27 Miquel Raynal [this message]
2019-02-21 9:27 ` [PATCH 1/6] mtd: nand: omap: Fix comment in platform data using wrong Kconfig symbol Miquel Raynal
2019-02-21 9:27 ` [PATCH 2/6] mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm Miquel Raynal
2019-02-21 9:27 ` [PATCH 3/6] mtd: nand: Clarify Kconfig entry for software Hamming ECC entries Miquel Raynal
2019-02-21 9:27 ` [PATCH 4/6] mtd: rawnand: Change Kconfig titles and re-order a bit the list Miquel Raynal
2019-02-21 9:27 ` [PATCH 5/6] mtd: rawnand: Clarify Kconfig entry MTD_NAND Miquel Raynal
2019-02-21 9:27 ` [PATCH 6/6] mtd: nand: Remove useless line in Kconfig Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190221092734.21634-1-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=juliensu@mxic.com.tw \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=masonccyang@mxic.com.tw \
--cc=richard@nod.at \
--cc=thomas.petazzoni@bootlin.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).