* [PATCH v2 0/2] mtd: physmap: Using gpio-addrs
@ 2019-03-29 2:13 Chris Packham
2019-03-29 2:13 ` [PATCH v2 1/2] mtd: maps: physmap: Store gpio_values correctly Chris Packham
2019-03-29 2:13 ` [PATCH v2 2/2] dt-binding: mtd: physmap: Add example using addr-gpios property Chris Packham
0 siblings, 2 replies; 4+ messages in thread
From: Chris Packham @ 2019-03-29 2:13 UTC (permalink / raw)
To: bbrezillon, computersforpeace, dwmw2, marek.vasut, richard,
robh+dt, mark.rutland
Cc: devicetree, Chris Packham, linux-mtd, linux-kernel
I have a system with ADDR24 of the flash chip connected to a gpio pin. This
series fixes a bug in physmap-core.c and adds an example for using gpio-addrs
to the dt-binding based on the system I'm using.
Chris Packham (2):
mtd: maps: physmap: Store gpio_values correctly
dt-binding: mtd: physmap: Add example using addr-gpios property
.../devicetree/bindings/mtd/mtd-physmap.txt | 16 ++++++++++++++++
drivers/mtd/maps/physmap-core.c | 2 ++
2 files changed, 18 insertions(+)
--
2.21.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] mtd: maps: physmap: Store gpio_values correctly
2019-03-29 2:13 [PATCH v2 0/2] mtd: physmap: Using gpio-addrs Chris Packham
@ 2019-03-29 2:13 ` Chris Packham
2019-03-29 2:13 ` [PATCH v2 2/2] dt-binding: mtd: physmap: Add example using addr-gpios property Chris Packham
1 sibling, 0 replies; 4+ messages in thread
From: Chris Packham @ 2019-03-29 2:13 UTC (permalink / raw)
To: bbrezillon, computersforpeace, dwmw2, marek.vasut, richard,
robh+dt, mark.rutland
Cc: devicetree, linux-kernel, stable, Chris Packham, linux-mtd,
Boris Brezillon
When the gpio-addr-flash.c driver was merged with physmap-core.c the
code to store the current gpio_values was lost. This meant that once a
gpio was asserted it was never de-asserted. Fix this by storing the
current offset in gpio_values like the old driver used to.
Fixes: commit ba32ce95cbd9 ("mtd: maps: Merge gpio-addr-flash.c into physmap-core.c")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
Changes in v2:
- Cc stable, add Boris' review
drivers/mtd/maps/physmap-core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index d9a3e4bebe5d..21b556afc305 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -132,6 +132,8 @@ static void physmap_set_addr_gpios(struct physmap_flash_info *info,
gpiod_set_value(info->gpios->desc[i], !!(BIT(i) & ofs));
}
+
+ info->gpio_values = ofs;
}
#define win_mask(order) (BIT(order) - 1)
--
2.21.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] dt-binding: mtd: physmap: Add example using addr-gpios property
2019-03-29 2:13 [PATCH v2 0/2] mtd: physmap: Using gpio-addrs Chris Packham
2019-03-29 2:13 ` [PATCH v2 1/2] mtd: maps: physmap: Store gpio_values correctly Chris Packham
@ 2019-03-29 2:13 ` Chris Packham
2019-04-06 6:05 ` Rob Herring
1 sibling, 1 reply; 4+ messages in thread
From: Chris Packham @ 2019-03-29 2:13 UTC (permalink / raw)
To: bbrezillon, computersforpeace, dwmw2, marek.vasut, richard,
robh+dt, mark.rutland
Cc: devicetree, Chris Packham, linux-mtd, linux-kernel
Add an example showing how to use the addr-gpios property to deal with a
system with limited IO space.
Cc: devicetree@vger.kernel.org
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Changes in v2:
- None
.../devicetree/bindings/mtd/mtd-physmap.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
index 7df0dcaccb7d..c69f4f065d23 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
@@ -96,3 +96,19 @@ An example using SRAM:
bank-width = <2>;
};
+An example using gpio-addrs
+
+ flash@20000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash", "jedec-flash";
+ reg = <0x20000000 0x02000000>;
+ ranges = <0 0x00000000 0x02000000
+ 1 0x02000000 0x02000000>;
+ bank-width = <2>;
+ addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
--
2.21.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 2/2] dt-binding: mtd: physmap: Add example using addr-gpios property
2019-03-29 2:13 ` [PATCH v2 2/2] dt-binding: mtd: physmap: Add example using addr-gpios property Chris Packham
@ 2019-04-06 6:05 ` Rob Herring
0 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2019-04-06 6:05 UTC (permalink / raw)
To: Chris Packham
Cc: mark.rutland, devicetree, bbrezillon, richard, linux-kernel,
marek.vasut, robh+dt, linux-mtd, Chris Packham,
computersforpeace, dwmw2
On Fri, 29 Mar 2019 15:13:22 +1300, Chris Packham wrote:
> Add an example showing how to use the addr-gpios property to deal with a
> system with limited IO space.
>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> Changes in v2:
> - None
>
> .../devicetree/bindings/mtd/mtd-physmap.txt | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-04-06 6:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-29 2:13 [PATCH v2 0/2] mtd: physmap: Using gpio-addrs Chris Packham
2019-03-29 2:13 ` [PATCH v2 1/2] mtd: maps: physmap: Store gpio_values correctly Chris Packham
2019-03-29 2:13 ` [PATCH v2 2/2] dt-binding: mtd: physmap: Add example using addr-gpios property Chris Packham
2019-04-06 6:05 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).