Re: [PATCH 00/11] add support for sam9x60 nand controller

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: <Tudor.Ambarus@microchip.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	alexandre.belloni@bootlin.com, bbrezillon@kernel.org,
	richard@nod.at, Nicolas.Ferre@microchip.com,
	linux-kernel@vger.kernel.org, marek.vasut@gmail.com,
	Ludovic.Desroches@microchip.com, robh+dt@kernel.org,
	linux-mtd@lists.infradead.org, lee.jones@linaro.org,
	computersforpeace@gmail.com, dwmw2@infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 00/11] add support for sam9x60 nand controller
Date: Mon, 1 Apr 2019 17:24:02 +0200	[thread overview]
Message-ID: <20190401172352.7f18e49f@xps13> (raw)
In-Reply-To: <20190213085930.31578-1-tudor.ambarus@microchip.com>

Hi Tudor,

<Tudor.Ambarus@microchip.com> wrote on Wed, 13 Feb 2019 08:59:41 +0000:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> The sam9x60 board defines the CCFG_EBICSA register under SFR,
> and not as a MATRIX register, as previous boards do.
> NAND Flash I/Os are connected to D16–D23, thus
> SFR_CCFG_EBICSA.NFD0_ON_D16 is set to 1.
> 
> Tested using mtd-utils.
> 
> - patches [1, 7] add support for the sam9x60 nand controller. I would
>   suggest to get them through linux-mtd tree, if all agree.
> - patch 8 can be taken by Alexandre
> - patch 9 - SPDX change, can be taken by Lee
> - patch 10 - SPDX change, can be taken by Alexandre
> - patch 11 - SPDX change, should go through linux-mtd
> 
> dt compatible string for "microchip,sam9x60-sfr" has already been
> submited at https://patchwork.kernel.org/patch/10799831/
> 
> Tudor Ambarus (11):
>   ARM: at91: add sam9x60 SFR definitions
>   memory: atmel-ebi: add generic name for ebi regmap
>   dt-bindings: memory: atmel-ebi: add sam9x60 compatible
>   memory: atmel-ebi: add sam9x60 EBI support
>   mtd: rawnand: atmel: add generic name for EBICSA regmap
>   dt-bindings: mtd: atmel-nand: add sam9x60 compatible
>   mtd: rawnand: atmel: add sam9x60 nand controller support
>   memory: atmel-ebi: move NUM_CS definition inside atmel-ebi
>   mfd: syscon: atmel: switch to SPDX license identifiers
>   memory: atmel-ebi: switch to SPDX license identifiers
>   mtd: rawnand: atmel: switch to SPDX license identifiers
> 
>  .../bindings/memory-controllers/atmel,ebi.txt      |   1 +
>  .../devicetree/bindings/mtd/atmel-nand.txt         |   1 +
>  drivers/memory/atmel-ebi.c                         |  48 ++++++---
>  drivers/mtd/nand/raw/atmel/nand-controller.c       | 117 ++++++++++++++++-----
>  drivers/mtd/nand/raw/atmel/pmecc.c                 |   5 +-
>  drivers/mtd/nand/raw/atmel/pmecc.h                 |   6 +-
>  include/linux/mfd/syscon/atmel-matrix.h            |   7 +-
>  include/linux/mfd/syscon/atmel-mc.h                |   6 +-
>  include/linux/mfd/syscon/atmel-smc.h               |   5 +-
>  include/linux/mfd/syscon/atmel-st.h                |   6 +-
>  include/soc/at91/atmel-sfr.h                       |  34 ++++--
>  11 files changed, 161 insertions(+), 75 deletions(-)
> 

Patches 1-7 & 11 applied to
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git on nand/next.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/