Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Vinod Koul <vkoul@kernel.org>, Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Lee Jones <lee.jones@linaro.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Sebastian Reichel <sre@kernel.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-fbdev@vger.kernel.org, Artur Rojek <contact@artur-rojek.eu>,
	alsa-devel@alsa-project.org, linux-pm@vger.kernel.org,
	linux-mips@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org,
	Paul Cercueil <paul@crapouillou.net>,
	od@zcrc.me, linux-mtd@lists.infradead.org,
	dmaengine@vger.kernel.org
Subject: [PATCH 04/11] ASoC: jz4740: Drop lb60 board code
Date: Thu, 25 Jul 2019 18:02:08 -0400
Message-ID: <20190725220215.460-5-paul@crapouillou.net> (raw)
In-Reply-To: <20190725220215.460-1-paul@crapouillou.net>

The board now uses the simple-audio-card driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
 sound/soc/jz4740/Kconfig   |  25 +--------
 sound/soc/jz4740/Makefile  |   5 --
 sound/soc/jz4740/qi_lb60.c | 106 -------------------------------------
 3 files changed, 2 insertions(+), 134 deletions(-)
 delete mode 100644 sound/soc/jz4740/qi_lb60.c

diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig
index 6b757168693e..e72f826062e9 100644
--- a/sound/soc/jz4740/Kconfig
+++ b/sound/soc/jz4740/Kconfig
@@ -1,30 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
-config SND_JZ4740_SOC
-	tristate "SoC Audio for Ingenic JZ4740 SoC"
-	depends on MIPS || COMPILE_TEST
-	select SND_SOC_GENERIC_DMAENGINE_PCM
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the JZ4740 I2S interface. You will also need to select the audio
-	  interfaces to support below.
-
-if SND_JZ4740_SOC
-
 config SND_JZ4740_SOC_I2S
 	tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC"
+	depends on MIPS || COMPILE_TEST
 	depends on HAS_IOMEM
+	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	  Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740
 	  based boards.
-
-config SND_JZ4740_SOC_QI_LB60
-	tristate "SoC Audio support for Qi LB60"
-	depends on HAS_IOMEM
-	depends on JZ4740_QI_LB60 || COMPILE_TEST
-	select SND_JZ4740_SOC_I2S
-    select SND_SOC_JZ4740_CODEC
-	help
-	  Say Y if you want to add support for ASoC audio on the Qi LB60 board
-	  a.k.a Qi Ben NanoNote.
-
-endif
diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile
index fb10e9ad9ff7..f8701c9b09fe 100644
--- a/sound/soc/jz4740/Makefile
+++ b/sound/soc/jz4740/Makefile
@@ -5,8 +5,3 @@
 snd-soc-jz4740-i2s-objs := jz4740-i2s.o
 
 obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o
-
-# Jz4740 Machine Support
-snd-soc-qi-lb60-objs := qi_lb60.o
-
-obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o
diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c
deleted file mode 100644
index 8ef6f41dcfbe..000000000000
--- a/sound/soc/jz4740/qi_lb60.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <linux/gpio/consumer.h>
-
-struct qi_lb60 {
-	struct gpio_desc *snd_gpio;
-	struct gpio_desc *amp_gpio;
-};
-
-static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget,
-			     struct snd_kcontrol *ctrl, int event)
-{
-	struct qi_lb60 *qi_lb60 = snd_soc_card_get_drvdata(widget->dapm->card);
-	int on = !SND_SOC_DAPM_EVENT_OFF(event);
-
-	gpiod_set_value_cansleep(qi_lb60->snd_gpio, on);
-	gpiod_set_value_cansleep(qi_lb60->amp_gpio, on);
-
-	return 0;
-}
-
-static const struct snd_soc_dapm_widget qi_lb60_widgets[] = {
-	SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event),
-	SND_SOC_DAPM_MIC("Mic", NULL),
-};
-
-static const struct snd_soc_dapm_route qi_lb60_routes[] = {
-	{"Mic", NULL, "MIC"},
-	{"Speaker", NULL, "LOUT"},
-	{"Speaker", NULL, "ROUT"},
-};
-
-SND_SOC_DAILINK_DEFS(hifi,
-	DAILINK_COMP_ARRAY(COMP_CPU("jz4740-i2s")),
-	DAILINK_COMP_ARRAY(COMP_CODEC("jz4740-codec", "jz4740-hifi")),
-	DAILINK_COMP_ARRAY(COMP_PLATFORM("jz4740-i2s")));
-
-static struct snd_soc_dai_link qi_lb60_dai = {
-	.name = "jz4740",
-	.stream_name = "jz4740",
-	.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-		SND_SOC_DAIFMT_CBM_CFM,
-	SND_SOC_DAILINK_REG(hifi),
-};
-
-static struct snd_soc_card qi_lb60_card = {
-	.name = "QI LB60",
-	.owner = THIS_MODULE,
-	.dai_link = &qi_lb60_dai,
-	.num_links = 1,
-
-	.dapm_widgets = qi_lb60_widgets,
-	.num_dapm_widgets = ARRAY_SIZE(qi_lb60_widgets),
-	.dapm_routes = qi_lb60_routes,
-	.num_dapm_routes = ARRAY_SIZE(qi_lb60_routes),
-	.fully_routed = true,
-};
-
-static int qi_lb60_probe(struct platform_device *pdev)
-{
-	struct qi_lb60 *qi_lb60;
-	struct snd_soc_card *card = &qi_lb60_card;
-
-	qi_lb60 = devm_kzalloc(&pdev->dev, sizeof(*qi_lb60), GFP_KERNEL);
-	if (!qi_lb60)
-		return -ENOMEM;
-
-	qi_lb60->snd_gpio = devm_gpiod_get(&pdev->dev, "snd", GPIOD_OUT_LOW);
-	if (IS_ERR(qi_lb60->snd_gpio))
-		return PTR_ERR(qi_lb60->snd_gpio);
-
-	qi_lb60->amp_gpio = devm_gpiod_get(&pdev->dev, "amp", GPIOD_OUT_LOW);
-	if (IS_ERR(qi_lb60->amp_gpio))
-		return PTR_ERR(qi_lb60->amp_gpio);
-
-	card->dev = &pdev->dev;
-
-	snd_soc_card_set_drvdata(card, qi_lb60);
-
-	return devm_snd_soc_register_card(&pdev->dev, card);
-}
-
-static struct platform_driver qi_lb60_driver = {
-	.driver		= {
-		.name	= "qi-lb60-audio",
-	},
-	.probe		= qi_lb60_probe,
-};
-
-module_platform_driver(qi_lb60_driver);
-
-MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:qi-lb60-audio");
-- 
2.21.0.593.g511ec345e18


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply index

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-25 22:02 [PATCH 00/11] JZ4740 SoC cleanup Paul Cercueil
2019-07-25 22:02 ` [PATCH 01/11] MIPS: DTS: jz4740: Add missing nodes Paul Cercueil
2019-07-30 17:43   ` Paul Burton
2019-07-25 22:02 ` [PATCH 02/11] MIPS: qi_lb60: Migrate to devicetree Paul Cercueil
2019-07-25 23:47   ` Paul Burton
2019-07-26  0:09     ` Paul Cercueil
2019-07-30 17:43   ` Paul Burton
2019-07-25 22:02 ` [PATCH 03/11] MIPS: configs: LB60: update defconfig Paul Cercueil
2019-07-30 17:43   ` Paul Burton
2019-07-25 22:02 ` Paul Cercueil [this message]
2019-07-26 11:33   ` [PATCH 04/11] ASoC: jz4740: Drop lb60 board code Mark Brown
2019-07-30 17:43   ` Paul Burton
2019-07-25 22:02 ` [PATCH 05/11] video/fbdev: Drop JZ4740 driver Paul Cercueil
2019-07-26 18:45   ` Sam Ravnborg
2019-07-30 17:43   ` Paul Burton
2019-07-25 22:02 ` [PATCH 06/11] dma: " Paul Cercueil
2019-07-29  6:44   ` Vinod Koul
2019-07-30 17:44   ` Paul Burton
2019-07-25 22:02 ` [PATCH 07/11] mtd: rawnand: Drop obsolete JZ4740 NAND driver Paul Cercueil
2019-07-26 18:57   ` Miquel Raynal
2019-07-30 17:44   ` Paul Burton
2019-07-25 22:02 ` [PATCH 08/11] power/supply: Drop obsolete JZ4740 driver Paul Cercueil
2019-07-29 11:03   ` Sebastian Reichel
2019-07-30 17:44   ` Paul Burton
2019-07-25 22:02 ` [PATCH 09/11] hwmon: " Paul Cercueil
2019-07-25 22:16   ` Guenter Roeck
2019-07-30 17:44   ` Paul Burton
2019-07-25 22:02 ` [PATCH 10/11] mfd: " Paul Cercueil
2019-08-12  8:16   ` Lee Jones
2019-08-13  8:44     ` Philippe Mathieu-Daudé
2019-08-13 10:01       ` Paul Cercueil
2019-08-13 10:30         ` Lee Jones
2019-07-25 22:02 ` [PATCH 11/11] MIPS: jz4740: Drop dead code Paul Cercueil
2019-07-30 17:44   ` Paul Burton
2019-07-26 18:46 ` [PATCH 00/11] JZ4740 SoC cleanup Sam Ravnborg
2019-07-27  3:19   ` Paul Cercueil
2019-07-29 11:23 ` Richard Weinberger
2019-07-29 17:05   ` Paul Cercueil
2019-07-29 18:08     ` Richard Weinberger

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190725220215.460-5-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=broonie@kernel.org \
    --cc=contact@artur-rojek.eu \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jdelvare@suse.com \
    --cc=jhogan@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=od@zcrc.me \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org linux-mtd@archiver.kernel.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/ public-inbox