linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Tokunori Ikegami <ikegami.t@gmail.com>
To: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Tokunori Ikegami <ikegami.t@gmail.com>,
	Chris Packham <chris.packham@alliedtelesis.co.nz>,
	linux-mtd@lists.infradead.org, Fabio Bettoni <fbettoni@gmail.com>,
	Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Subject: [PATCH v8 6/9] mtd: cfi_cmdset_0002: Split write-to-buffer-reset sequence
Date: Tue,  6 Aug 2019 04:03:23 +0900	[thread overview]
Message-ID: <20190805190326.28772-7-ikegami.t@gmail.com> (raw)
In-Reply-To: <20190805190326.28772-1-ikegami.t@gmail.com>

Just refactor to split the sequence from do_write_buffer().

Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: Fabio Bettoni <fbettoni@gmail.com>
Co: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: linux-mtd@lists.infradead.org
---
Changes since v7:
Rebased on top of polling status register support in master.

Changes since v6:
- Removed the tag of Koen Vandeputte as same with the v7 1/9 patch.

Changes since v5:
- Rebased on top of Liu Jian's fixes in master.
- Change the email address of Tokunori Ikegami to ikegami.t@gmail.com.

Changes since v4:
- None.

Changes since v3:
- Just change the email address of Tokunori Ikegami to ikegami_to@yahoo.co.jp.

Changes since v2:
- None.

Changes since v1:
- Add the patch.

 drivers/mtd/chips/cfi_cmdset_0002.c | 38 +++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index dea63842dec9..7abd844bd702 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1918,6 +1918,27 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 	return 0;
 }
 
+static void __xipram do_write_buffer_reset(struct map_info *map,
+					   struct flchip *chip,
+					   struct cfi_private *cfi)
+{
+	/*
+	 * Recovery from write-buffer programming failures requires
+	 * the write-to-buffer-reset sequence.  Since the last part
+	 * of the sequence also works as a normal reset, we can run
+	 * the same commands regardless of why we are here.
+	 * See e.g.
+	 * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
+	 */
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+
+	/* FIXME - should have reset delay before continuing */
+}
 
 /*
  * FIXME: interleaved mode not tested, and probably not supported!
@@ -2024,23 +2045,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	}
 
 	if (ret) {
-		/*
-		 * Recovery from write-buffer programming failures requires
-		 * the write-to-buffer-reset sequence.  Since the last part
-		 * of the sequence also works as a normal reset, we can run
-		 * the same commands regardless of why we are here.
-		 * See e.g.
-		 * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
-		 */
 		cfi_check_err_status(map, chip, adr);
-		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
-				 cfi->device_type, NULL);
-		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
-				 cfi->device_type, NULL);
-		cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
-				 cfi->device_type, NULL);
-		/* FIXME - should have reset delay before continuing */
-
+		do_write_buffer_reset(map, chip, cfi);
 		pr_err("MTD %s(): software timeout, address:0x%.8lx.\n",
 		       __func__, adr);
 	}
-- 
2.11.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2019-08-05 19:05 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-05 19:03 [PATCH v8 0/9] mtd: cfi_cmdset_0002: Fix flash write issue for OpenWrt Project Tokunori Ikegami
2019-08-05 19:03 ` [PATCH v8 1/9] mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword() Tokunori Ikegami
2019-08-06  0:43   ` Sasha Levin
2019-08-06 14:30     ` Tokunori Ikegami
2019-09-17 18:04       ` Tokunori Ikegami
2019-09-18  5:29         ` Vignesh Raghavendra
2019-09-18 13:40           ` Tokunori Ikegami
2019-08-05 19:03 ` [PATCH v8 2/9] mtd: cfi_cmdset_0002: Remove goto statement from do_write_buffer() Tokunori Ikegami
2019-08-05 19:03 ` [PATCH v8 3/9] mtd: cfi_cmdset_0002: Split do_write_oneword() to reduce function size Tokunori Ikegami
2019-08-05 19:03 ` [PATCH v8 4/9] mtd: cfi_cmdset_0002: Split do_write_oneword() op_done goto statement Tokunori Ikegami
2019-08-05 19:03 ` [PATCH v8 5/9] mtd: cfi_cmdset_0002: Remove op_done goto statement from do_write_oneword() Tokunori Ikegami
2019-08-05 19:03 ` Tokunori Ikegami [this message]
2019-08-05 19:03 ` [PATCH v8 7/9] mtd: cfi_cmdset_0002: Split to wait write buffer to check if completed Tokunori Ikegami
2019-08-05 19:03 ` [PATCH v8 8/9] mtd: cfi_cmdset_0002: Split do_write_oneword() to reduce exit paths Tokunori Ikegami
2019-08-05 19:03 ` [PATCH v8 9/9] mtd: cfi_cmdset_0002: Disable write buffer functions if FORCE_WORD_WRITE is 1 Tokunori Ikegami
2019-09-17  4:20 ` [PATCH v8 0/9] mtd: cfi_cmdset_0002: Fix flash write issue for OpenWrt Project Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190805190326.28772-7-ikegami.t@gmail.com \
    --to=ikegami.t@gmail.com \
    --cc=Joakim.Tjernlund@infinera.com \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=fbettoni@gmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).