linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@collabora.com>
To: <Tudor.Ambarus@microchip.com>
Cc: vigneshr@ti.com, richard@nod.at, linux-kernel@vger.kernel.org,
	marek.vasut@gmail.com, linux-mtd@lists.infradead.org,
	miquel.raynal@bootlin.com
Subject: Re: [PATCH 5/5] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
Date: Sun, 25 Aug 2019 13:34:02 +0200	[thread overview]
Message-ID: <20190825133402.18ff8c96@collabora.com> (raw)
In-Reply-To: <20190823155325.13459-6-tudor.ambarus@microchip.com>

On Fri, 23 Aug 2019 15:53:43 +0000
<Tudor.Ambarus@microchip.com> wrote:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> All flash parameters and settings should reside inside
> 'struct spi_nor_flash_parameter'. Move the SMPT parsed erase map
> from 'struct spi_nor' to 'struct spi_nor_flash_parameter'.
> 
> Please note that there is a roll-back mechanism for the flash
> parameter and settings, for cases when SFDP parser fails. The SFDP
> parser receives a Stack allocated copy of nor->params, called
> sfdp_params, and uses it to retrieve the serial flash discoverable
> parameters. JESD216 SFDP is a standard and has a higher priority
> than the legacy initialized flash parameters, so will overwrite the
> sfdp_params data when needed. All SFDP code uses the local copy of
> nor->params, that will overwrite it in the end, if the parser succeds.
> 
> Saving and restoring the nor->params.erase_map is no longer needed,
> since the SFDP code does not touch it.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

> ---
>  drivers/mtd/spi-nor/spi-nor.c | 40 +++++++++++++++++++++-------------------
>  include/linux/mtd/spi-nor.h   |  8 +++++---
>  2 files changed, 26 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 15b0b1148bf3..f5c1c71caf1b 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -600,7 +600,7 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
>  	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
>  
>  	if (!spi_nor_has_uniform_erase(nor)) {
> -		struct spi_nor_erase_map *map = &nor->erase_map;
> +		struct spi_nor_erase_map *map = &nor->params.erase_map;
>  		struct spi_nor_erase_type *erase;
>  		int i;
>  
> @@ -1133,7 +1133,7 @@ static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
>  				       struct list_head *erase_list,
>  				       u64 addr, u32 len)
>  {
> -	const struct spi_nor_erase_map *map = &nor->erase_map;
> +	const struct spi_nor_erase_map *map = &nor->params.erase_map;
>  	const struct spi_nor_erase_type *erase, *prev_erase = NULL;
>  	struct spi_nor_erase_region *region;
>  	struct spi_nor_erase_command *cmd = NULL;
> @@ -3328,7 +3328,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>  			      const struct sfdp_parameter_header *bfpt_header,
>  			      struct spi_nor_flash_parameter *params)
>  {
> -	struct spi_nor_erase_map *map = &nor->erase_map;
> +	struct spi_nor_erase_map *map = &params->erase_map;
>  	struct spi_nor_erase_type *erase_type = map->erase_type;
>  	struct sfdp_bfpt bfpt;
>  	size_t len;
> @@ -3409,7 +3409,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>  	 * Erase Types defined in the bfpt table.
>  	 */
>  	erase_mask = 0;
> -	memset(&nor->erase_map, 0, sizeof(nor->erase_map));
> +	memset(&params->erase_map, 0, sizeof(params->erase_map));
>  	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
>  		const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
>  		u32 erasesize;
> @@ -3684,14 +3684,18 @@ spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
>  /**
>   * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
>   * @nor:	pointer to a 'struct spi_nor'
> + * @params:     pointer to a duplicate 'struct spi_nor_flash_parameter' that is
> + *              used for storing SFDP parsed data
>   * @smpt:	pointer to the sector map parameter table
>   *
>   * Return: 0 on success, -errno otherwise.
>   */
> -static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
> -					      const u32 *smpt)
> +static int
> +spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
> +				   struct spi_nor_flash_parameter *params,
> +				   const u32 *smpt)
>  {
> -	struct spi_nor_erase_map *map = &nor->erase_map;
> +	struct spi_nor_erase_map *map = &params->erase_map;
>  	struct spi_nor_erase_type *erase = map->erase_type;
>  	struct spi_nor_erase_region *region;
>  	u64 offset;
> @@ -3770,6 +3774,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
>   * spi_nor_parse_smpt() - parse Sector Map Parameter Table
>   * @nor:		pointer to a 'struct spi_nor'
>   * @smpt_header:	sector map parameter table header
> + * @params:		pointer to a duplicate 'struct spi_nor_flash_parameter'
> + *                      that is used for storing SFDP parsed data
>   *
>   * This table is optional, but when available, we parse it to identify the
>   * location and size of sectors within the main data array of the flash memory
> @@ -3778,7 +3784,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
>   * Return: 0 on success, -errno otherwise.
>   */
>  static int spi_nor_parse_smpt(struct spi_nor *nor,
> -			      const struct sfdp_parameter_header *smpt_header)
> +			      const struct sfdp_parameter_header *smpt_header,
> +			      struct spi_nor_flash_parameter *params)
>  {
>  	const u32 *sector_map;
>  	u32 *smpt;
> @@ -3807,11 +3814,11 @@ static int spi_nor_parse_smpt(struct spi_nor *nor,
>  		goto out;
>  	}
>  
> -	ret = spi_nor_init_non_uniform_erase_map(nor, sector_map);
> +	ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
>  	if (ret)
>  		goto out;
>  
> -	spi_nor_regions_sort_erase_types(&nor->erase_map);
> +	spi_nor_regions_sort_erase_types(&params->erase_map);
>  	/* fall through */
>  out:
>  	kfree(smpt);
> @@ -3867,7 +3874,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
>  		{ 0u /* not used */,		BIT(12) },
>  	};
>  	struct spi_nor_pp_command *params_pp = params->page_programs;
> -	struct spi_nor_erase_map *map = &nor->erase_map;
> +	struct spi_nor_erase_map *map = &params->erase_map;
>  	struct spi_nor_erase_type *erase_type = map->erase_type;
>  	u32 *dwords;
>  	size_t len;
> @@ -4097,7 +4104,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
>  
>  		switch (SFDP_PARAM_HEADER_ID(param_header)) {
>  		case SFDP_SECTOR_MAP_ID:
> -			err = spi_nor_parse_smpt(nor, param_header);
> +			err = spi_nor_parse_smpt(nor, param_header, params);
>  			break;
>  
>  		case SFDP_4BAIT_ID:
> @@ -4129,7 +4136,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
>  static int spi_nor_init_params(struct spi_nor *nor)
>  {
>  	struct spi_nor_flash_parameter *params = &nor->params;
> -	struct spi_nor_erase_map *map = &nor->erase_map;
> +	struct spi_nor_erase_map *map = &params->erase_map;
>  	const struct flash_info *info = nor->info;
>  	u8 i, erase_mask;
>  
> @@ -4229,17 +4236,12 @@ static int spi_nor_init_params(struct spi_nor *nor)
>  	if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
>  	    !(info->flags & SPI_NOR_SKIP_SFDP)) {
>  		struct spi_nor_flash_parameter sfdp_params;
> -		struct spi_nor_erase_map prev_map;
>  
>  		memcpy(&sfdp_params, params, sizeof(sfdp_params));
> -		memcpy(&prev_map, &nor->erase_map, sizeof(prev_map));
>  
>  		if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
>  			nor->addr_width = 0;
>  			nor->flags &= ~SNOR_F_4B_OPCODES;
> -			/* restore previous erase map */
> -			memcpy(&nor->erase_map, &prev_map,
> -			       sizeof(nor->erase_map));
>  		} else {
>  			memcpy(params, &sfdp_params, sizeof(*params));
>  		}
> @@ -4353,7 +4355,7 @@ spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
>  
>  static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
>  {
> -	struct spi_nor_erase_map *map = &nor->erase_map;
> +	struct spi_nor_erase_map *map = &nor->params.erase_map;
>  	const struct spi_nor_erase_type *erase = NULL;
>  	struct mtd_info *mtd = &nor->mtd;
>  	int i;
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index 399ac34a529d..a3a765c21edc 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -479,6 +479,8 @@ struct spi_nor;
>   *                      in the array, the higher priority.
>   * @page_programs:	page program capabilities ordered by priority: the
>   *                      higher index in the array, the higher priority.
> + * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
> + *                      Table.
>   * @quad_enable:	enables SPI NOR quad mode.
>   * @disable_block_protection: disables block protection during power-up.
>   */
> @@ -490,6 +492,8 @@ struct spi_nor_flash_parameter {
>  	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
>  	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
>  
> +	struct spi_nor_erase_map        erase_map;
> +
>  	int (*quad_enable)(struct spi_nor *nor);
>  	int (*disable_block_protection)(struct spi_nor *nor);
>  };
> @@ -521,7 +525,6 @@ struct flash_info;
>   * @read_proto:		the SPI protocol for read operations
>   * @write_proto:	the SPI protocol for write operations
>   * @reg_proto		the SPI protocol for read_reg/write_reg/erase operations
> - * @erase_map:		the erase map of the SPI NOR
>   * @prepare:		[OPTIONAL] do some preparations for the
>   *			read/write/erase/lock/unlock operations
>   * @unprepare:		[OPTIONAL] do some post work after the
> @@ -562,7 +565,6 @@ struct spi_nor {
>  	enum spi_nor_protocol	reg_proto;
>  	bool			sst_write_second;
>  	u32			flags;
> -	struct spi_nor_erase_map	erase_map;
>  
>  	int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
>  	void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
> @@ -609,7 +611,7 @@ spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
>  
>  static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor)
>  {
> -	return !!nor->erase_map.uniform_erase_type;
> +	return !!nor->params.erase_map.uniform_erase_type;
>  }
>  
>  static inline void spi_nor_set_flash_node(struct spi_nor *nor,


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2019-08-25 11:34 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23 15:53 [PATCH 0/5] mtd: spi-nor: move manuf out of the core - batch 0 Tudor.Ambarus
2019-08-23 15:53 ` [PATCH 1/5] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-25 11:32   ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 2/5] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-25 11:31   ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 3/5] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-25 11:32   ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 4/5] mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-24  3:53   ` Tudor.Ambarus
2019-08-25 11:33   ` Boris Brezillon
2019-08-25 13:09   ` Boris Brezillon
2019-08-25 13:19     ` Tudor.Ambarus
2019-08-25 13:28       ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 5/5] mtd: spi-nor: Move erase_map " Tudor.Ambarus
2019-08-25 11:34   ` Boris Brezillon [this message]
2019-08-25 11:38 ` [PATCH 0/5] mtd: spi-nor: move manuf out of the core - batch 0 Boris Brezillon
2019-08-25 13:02   ` Tudor.Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190825133402.18ff8c96@collabora.com \
    --to=boris.brezillon@collabora.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).