Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <boris.brezillon@collabora.com>, <marek.vasut@gmail.com>,
	<vigneshr@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: Tudor.Ambarus@microchip.com
Subject: [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core
Date: Mon, 26 Aug 2019 12:08:30 +0000
Message-ID: <20190826120821.16351-1-tudor.ambarus@microchip.com> (raw)

From: Tudor Ambarus <tudor.ambarus@microchip.com>

v3:
- Drop patches:
  "mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter'"
  "mtd: spi-nor: Rework the disabling of block write protection"
and replace them with the RFC patch:
  "mtd: spi-nor: Rework the disabling of block write protection"
- rename spi_nor_legacy_init_params() to spi_nor_info_init_params()
- rebase patches and send them all in a single patch set.

v2:
- addressed all the comments
- all flash parameters and settings are now set in 'struct
  spi_nor_flash_parameter', for a clearer separation between the SPI NOR
  layer and the flash params.

In order to test this, you'll have to merge v5.3-rc5 in spi-nor/next.
This patch set depends on
'commit 834de5c1aa76 ("mtd: spi-nor: Fix the disabling of write protection at init")

The scope of the "mtd: spi-nor: move manuf out of the core" batches,
is to move all manufacturer specific code out of the spi-nor core.

In the quest of removing the manufacturer specific code from the spi-nor
core, we want to impose a timeline/priority on how the flash parameters
are updated. As of now. the flash parameters initialization logic is as
following:

    a/ default flash parameters init in spi_nor_init_params()
    b/ manufacturer specific flash parameters updates, split across entire
       spi-nor core code
    c/ flash parameters updates based on SFDP tables
    d/ post BFPT flash parameter updates

With the "mtd: spi-nor: move manuf out of the core" batches, we want to
impose the following sequence of calls:

    1/ spi-nor core legacy flash parameters init:
            spi_nor_default_init_params()

    2/ MFR-based manufacturer flash parameters init:
            nor->manufacturer->fixups->default_init()

    3/ specific flash_info tweeks done when decisions can not be done just
       on MFR:
            nor->info->fixups->default_init()

    4/ SFDP tables flash parameters init - SFDP knows better:
            spi_nor_sfdp_init_params()

    5/ post SFDP tables flash parameters updates - in case manufacturers
       get the serial flash tables wrong or incomplete.
            nor->info->fixups->post_sfdp()
       The later can be extended to nor->manufacturer->fixups->post_sfdp()
       if needed.

Setting of flash parameters will no longer be spread interleaved across
the spi-nor core, there will be a clear separation on who and when will
update the flash parameters.

Tested on sst26vf064b with atmel-quadspi SPIMEM driver.

Boris Brezillon (7):
  mtd: spi-nor: Add a default_init() fixup hook for gd25q256
  mtd: spi-nor: Create a ->set_4byte() method
  mtd: spi-nor: Rework the SPI NOR lock/unlock logic
  mtd: spi-nor: Add post_sfdp() hook to tweak flash config
  mtd: spi-nor: Add spansion_post_sfdp_fixups()
  mtd: spi-nor: Add a ->convert_addr() method
  mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag

Tudor Ambarus (13):
  mtd: spi-nor: Regroup flash parameter and settings
  mtd: spi-nor: Use nor->params
  mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
  mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
  mtd: spi-nor: Add default_init() hook to tweak flash parameters
  mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()
  mtd: spi-nor: Split spi_nor_init_params()
  mtd: spi_nor: Add a ->setup() method
  mtd: spi-nor: Add s3an_post_sfdp_fixups()
  mtd: spi-nor: Bring flash params init together
  mtd: spi_nor: Introduce spi_nor_set_addr_width()
  mtd: spi-nor: Introduce spi_nor_get_flash_info()
  mtd: spi-nor: Rework the disabling of block write protection

 drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------
 include/linux/mtd/spi-nor.h   |  298 +++++++---
 2 files changed, 927 insertions(+), 675 deletions(-)

-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-26 12:08 Tudor.Ambarus [this message]
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27  4:21   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27  4:31   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27  4:47   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:38   ` Boris Brezillon
2019-08-27  5:39   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27  5:54   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27  6:00   ` Vignesh Raghavendra
2019-08-27  7:01     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27  6:07   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27  6:36   ` Vignesh Raghavendra
2019-08-27  6:58     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27  7:08   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:10   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27  7:13   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40   ` Boris Brezillon
2019-08-26 13:38     ` Schrempf Frieder
2019-08-26 14:02       ` Boris Brezillon
2019-08-26 14:37         ` Schrempf Frieder
2019-08-27  7:16   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:18   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-27  7:48   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27  7:35   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49   ` Boris Brezillon
2019-08-27  5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190826120821.16351-1-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git