From: Boris Brezillon <boris.brezillon@collabora.com>
To: <Tudor.Ambarus@microchip.com>
Cc: richard@nod.at, linux-mtd@lists.infradead.org, vigneshr@ti.com,
linux-kernel@vger.kernel.org, miquel.raynal@bootlin.com
Subject: Re: [PATCH v3 09/32] mtd: spi-nor: Pointer parameter for FSR in spi_nor_read_fsr()
Date: Thu, 31 Oct 2019 11:53:52 +0100 [thread overview]
Message-ID: <20191031115352.4f111555@collabora.com> (raw)
In-Reply-To: <20191029111615.3706-10-tudor.ambarus@microchip.com>
On Tue, 29 Oct 2019 11:17:02 +0000
<Tudor.Ambarus@microchip.com> wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> Let the callers pass the pointer to the DMA-able buffer where
> the value of the Flag Status Register will be written. This way we
> avoid the casts between int and u8, which can be confusing.
>
> Caller stops compare the return value of spi_nor_read_fsr() with negative,
> spi_nor_read_fsr() returns 0 on success and -errno otherwise.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 38 ++++++++++++++++++++------------------
> 1 file changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index dc44d1206f77..0d38aede4de7 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -456,12 +456,15 @@ static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
> return ret;
> }
>
> -/*
> - * Read the flag status register, returning its value in the location
> - * Return the status register value.
> - * Returns negative if error occurred.
> +/**
> + * spi_nor_read_fsr() - Read the Flag Status Register.
> + * @nor: pointer to 'struct spi_nor'
> + * @fsr: pointer to a DMA-able buffer where the value of the
> + * Flag Status Register will be written.
> + *
> + * Return: 0 on success, -errno otherwise.
> */
> -static int spi_nor_read_fsr(struct spi_nor *nor)
> +static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
> {
> int ret;
>
> @@ -470,20 +473,18 @@ static int spi_nor_read_fsr(struct spi_nor *nor)
> SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1),
> SPI_MEM_OP_NO_ADDR,
> SPI_MEM_OP_NO_DUMMY,
> - SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1));
> + SPI_MEM_OP_DATA_IN(1, fsr, 1));
>
> ret = spi_mem_exec_op(nor->spimem, &op);
> } else {
> ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR,
> - nor->bouncebuf, 1);
> + fsr, 1);
> }
>
> - if (ret) {
> + if (ret)
> dev_err(nor->dev, "error %d reading FSR\n", ret);
> - return ret;
> - }
>
> - return nor->bouncebuf[0];
> + return ret;
> }
>
> /*
> @@ -705,17 +706,18 @@ static int spi_nor_clear_fsr(struct spi_nor *nor)
>
> static int spi_nor_fsr_ready(struct spi_nor *nor)
> {
> - int fsr = spi_nor_read_fsr(nor);
> - if (fsr < 0)
> - return fsr;
> + int ret = spi_nor_read_fsr(nor, &nor->bouncebuf[0]);
Didn't comment on the previous patch, but why not simply pass
nor->bouncebuf here?
Anyway, that's just a detail.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> +
> + if (ret)
> + return ret;
>
> - if (fsr & (FSR_E_ERR | FSR_P_ERR)) {
> - if (fsr & FSR_E_ERR)
> + if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
> + if (nor->bouncebuf[0] & FSR_E_ERR)
> dev_err(nor->dev, "Erase operation failed.\n");
> else
> dev_err(nor->dev, "Program operation failed.\n");
>
> - if (fsr & FSR_PT_ERR)
> + if (nor->bouncebuf[0] & FSR_PT_ERR)
> dev_err(nor->dev,
> "Attempted to modify a protected sector.\n");
>
> @@ -723,7 +725,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
> return -EIO;
> }
>
> - return fsr & FSR_READY;
> + return nor->bouncebuf[0] & FSR_READY;
> }
>
> static int spi_nor_ready(struct spi_nor *nor)
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-10-31 10:54 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 11:16 [PATCH v3 00/32] mtd: spi-nor: Quad Enable and (un)lock methods Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 01/32] mtd: spi-nor: Prepend spi_nor_ to all Reg Ops methods Tudor.Ambarus
2019-10-31 10:34 ` Boris Brezillon
2019-11-02 10:34 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 02/32] mtd: spi-nor: Drop duplicated new line Tudor.Ambarus
2019-10-31 10:34 ` Boris Brezillon
2019-11-02 10:34 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 03/32] mtd: spi-nor: Group all Reg Ops to avoid forward declarations Tudor.Ambarus
2019-10-31 10:35 ` Boris Brezillon
2019-11-02 10:35 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 04/32] mtd: spi-nor: Stop compare with negative in Reg Ops methods Tudor.Ambarus
2019-10-31 10:36 ` Boris Brezillon
2019-11-02 10:36 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 05/32] mtd: spi-nor: Drop explicit cast to int to already int value Tudor.Ambarus
2019-10-31 10:36 ` Boris Brezillon
2019-11-02 10:37 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 06/32] mtd: spi-nor: Use dev_err() instead of pr_err() Tudor.Ambarus
2019-10-31 10:43 ` Boris Brezillon
2019-11-02 10:38 ` Tudor.Ambarus
2019-10-29 11:16 ` [PATCH v3 07/32] mtd: spi-nor: Don't overwrite errno from Reg Ops Tudor.Ambarus
2019-10-31 10:48 ` Boris Brezillon
2019-11-02 10:39 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 08/32] mtd: spi-nor: Pointer parameter for SR in spi_nor_read_sr() Tudor.Ambarus
2019-10-31 10:51 ` Boris Brezillon
2019-11-02 10:42 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 09/32] mtd: spi-nor: Pointer parameter for FSR in spi_nor_read_fsr() Tudor.Ambarus
2019-10-31 10:53 ` Boris Brezillon [this message]
2019-11-02 10:44 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 10/32] mtd: spi-nor: Pointer parameter for CR in spi_nor_read_cr() Tudor.Ambarus
2019-10-31 10:58 ` Boris Brezillon
2019-10-31 14:26 ` Tudor.Ambarus
2019-11-02 10:45 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 11/32] mtd: spi-nor: Drop redundant error reports in Reg Ops callers Tudor.Ambarus
2019-10-31 10:59 ` Boris Brezillon
2019-11-02 10:46 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 12/32] mtd: spi-nor: Void return type for spi_nor_clear_sr/fsr() Tudor.Ambarus
2019-10-31 11:02 ` Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 13/32] mtd: spi-nor: Print error messages inside Reg Ops methods Tudor.Ambarus
2019-10-31 11:05 ` Boris Brezillon
2019-10-31 14:18 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 14/32] mtd: spi-nor: Fix retlen handling in sst_write() Tudor.Ambarus
2019-10-31 11:12 ` Boris Brezillon
2019-11-02 10:47 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 15/32] mtd: spi-nor: Check for errors after each Register Operation Tudor.Ambarus
2019-10-31 6:57 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 16/32] mtd: spi-nor: Rename label as it is no longer generic Tudor.Ambarus
2019-10-31 11:14 ` Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 17/32] mtd: spi-nor: Move the WE and wait calls inside Write SR methods Tudor.Ambarus
2019-10-31 11:15 ` Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 18/32] mtd: spi-nor: Constify data to write to the Status Register Tudor.Ambarus
2019-10-31 11:16 ` Boris Brezillon
2019-11-02 10:48 ` Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 19/32] mtd: spi-nor: Merge spi_nor_write_sr() and spi_nor_write_sr_cr() Tudor.Ambarus
2019-10-31 11:17 ` Boris Brezillon
2019-10-29 11:17 ` [PATCH v3 20/32] mtd: spi-nor: Describe all the Reg Ops Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 21/32] mtd: spi-nor: Drop spansion_quad_enable() Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 22/32] mtd: spi-nor: Fix errno on Quad Enable methods Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 23/32] mtd: spi-nor: Check all the bits written, not just the BP ones Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 24/32] mtd: spi-nor: Print error message when the read back test fails Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 25/32] mtd: spi-nor: Fix clearing of QE bit on lock()/unlock() Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 26/32] mtd: spi-nor: Extend the QE Read Back test to the entire SR byte Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 27/32] mtd: spi-nor: Extend the QE Read Back test to both SR1 and SR2 Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 28/32] mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1 Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 29/32] mtd: spi-nor: Merge spansion Quad Enable methods Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 30/32] mtd: spi-nor: Rename macronix_quad_enable to spi_nor_sr1_bit6_quad_enable Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 31/32] mtd: spi-nor: Prepend "spi_nor_" to "sr2_bit7_quad_enable" Tudor.Ambarus
2019-10-29 11:17 ` [PATCH v3 32/32] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191031115352.4f111555@collabora.com \
--to=boris.brezillon@collabora.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).