From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
Kurt Kanzenbach <kurt@linutronix.de>,
linux-mtd@lists.infradead.org,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH AUTOSEL 4.19 082/205] mtd: rawnand: fsl_ifc: fixup SRAM init for newer ctrl versions
Date: Fri, 8 Nov 2019 06:35:49 -0500 [thread overview]
Message-ID: <20191108113752.12502-82-sashal@kernel.org> (raw)
In-Reply-To: <20191108113752.12502-1-sashal@kernel.org>
From: Kurt Kanzenbach <kurt@linutronix.de>
[ Upstream commit ff8648f29fe58c2d94d32a076d2de7b92be4b485 ]
Newer versions of the IFC controller use a different method of initializing the
internal SRAM: Instead of reading from flash, a bit in the NAND configuration
register has to be set in order to trigger the self-initializing process.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/fsl_ifc_nand.c | 33 +++++++++++++++++++++++------
include/linux/fsl_ifc.h | 2 ++
2 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index e4f5792dc5893..7e7729df78278 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -30,6 +30,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/fsl_ifc.h>
+#include <linux/iopoll.h>
#define ERR_BYTE 0xFF /* Value returned for read
bytes when read failed */
@@ -769,6 +770,27 @@ static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
uint32_t csor = 0, csor_8k = 0, csor_ext = 0;
uint32_t cs = priv->bank;
+ if (ctrl->version < FSL_IFC_VERSION_1_1_0)
+ return 0;
+
+ if (ctrl->version > FSL_IFC_VERSION_1_1_0) {
+ u32 ncfgr, status;
+ int ret;
+
+ /* Trigger auto initialization */
+ ncfgr = ifc_in32(&ifc_runtime->ifc_nand.ncfgr);
+ ifc_out32(ncfgr | IFC_NAND_NCFGR_SRAM_INIT_EN, &ifc_runtime->ifc_nand.ncfgr);
+
+ /* Wait until done */
+ ret = readx_poll_timeout(ifc_in32, &ifc_runtime->ifc_nand.ncfgr,
+ status, !(status & IFC_NAND_NCFGR_SRAM_INIT_EN),
+ 10, IFC_TIMEOUT_MSECS * 1000);
+ if (ret)
+ dev_err(priv->dev, "Failed to initialize SRAM!\n");
+
+ return ret;
+ }
+
/* Save CSOR and CSOR_ext */
csor = ifc_in32(&ifc_global->csor_cs[cs].csor);
csor_ext = ifc_in32(&ifc_global->csor_cs[cs].csor_ext);
@@ -825,6 +847,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
struct nand_chip *chip = &priv->chip;
struct mtd_info *mtd = nand_to_mtd(&priv->chip);
u32 csor;
+ int ret;
/* Fill in fsl_ifc_mtd structure */
mtd->dev.parent = priv->dev;
@@ -918,13 +941,9 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.algo = NAND_ECC_HAMMING;
}
- if (ctrl->version >= FSL_IFC_VERSION_1_1_0) {
- int ret;
-
- ret = fsl_ifc_sram_init(priv);
- if (ret)
- return ret;
- }
+ ret = fsl_ifc_sram_init(priv);
+ if (ret)
+ return ret;
/*
* As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h
index 3fdfede2f0f3e..5f343b796ad95 100644
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -274,6 +274,8 @@
*/
/* Auto Boot Mode */
#define IFC_NAND_NCFGR_BOOT 0x80000000
+/* SRAM Initialization */
+#define IFC_NAND_NCFGR_SRAM_INIT_EN 0x20000000
/* Addressing Mode-ROW0+n/COL0 */
#define IFC_NAND_NCFGR_ADDR_MODE_RC0 0x00000000
/* Addressing Mode-ROW0+n/COL0+n */
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-11-08 11:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191108113752.12502-1-sashal@kernel.org>
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 080/205] mtd: rawnand: marvell: use regmap_update_bits() for syscon access Sasha Levin
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 081/205] mtd: rawnand: fsl_ifc: check result of SRAM initialization Sasha Levin
2019-11-08 11:35 ` Sasha Levin [this message]
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 083/205] mtd: rawnand: qcom: don't include dma-direct.h Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191108113752.12502-82-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=kurt@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).