From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Richard Weinberger <richard@nod.at>,
Esben Haabendal <esben@geanix.com>,
martin@geanix.com,
Boris Brezillon <boris.brezillon@collabora.com>,
linux-mtd@lists.infradead.org, sean@geanix.com,
Han Xu <han.xu@nxp.com>
Subject: Re: [PATCH 1/2] mtd: rawnand: gpmi: Fix suspend/resume problem
Date: Wed, 15 Jan 2020 09:46:38 +0100 [thread overview]
Message-ID: <20200115094638.1847f475@xps13> (raw)
In-Reply-To: <20200115074622.cn7eh6k3mtn6tze3@pengutronix.de>
Hi Esben,
Sascha Hauer <s.hauer@pengutronix.de> wrote on Wed, 15 Jan 2020
08:46:22 +0100:
> Hi Esben,
>
> On Thu, Jan 02, 2020 at 02:08:25PM +0100, Esben Haabendal wrote:
> > On system resume, the gpmi clock must be enabled before accessing gpmi
> > block. Without this, resume causes something like
> >
> > [ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout
> > [ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
> > [ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
> > [ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110
> >
> > Signed-off-by: Esben Haabendal <esben@geanix.com>
> > ---
> > drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> > index 334fe3130285..7ac8c8b95afc 100644
> > --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> > +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> > @@ -148,6 +148,10 @@ static int gpmi_init(struct gpmi_nand_data *this)
> > struct resources *r = &this->resources;
> > int ret;
> >
> > + ret = pm_runtime_get_sync(this->dev);
> > + if (ret < 0)
> > + return ret;
>
> This increases the devices usage counter...
I'm dropping the two patches for now, please resend with this fixed and
the Fixes/Cc:stable tags added.
I'll freeze the PR at the end of the week.
> > +
> > ret = gpmi_reset_block(r->gpmi_regs, false);
> > if (ret)
> > goto err_out;
> > @@ -181,6 +185,8 @@ static int gpmi_init(struct gpmi_nand_data *this)
> >
> > return 0;
>
> ... but doesn't decrease it in the success case. This means this patch
> effectively disables runtime pm. You should fall through here as fixed
> in Han Xus patch.
>
> > err_out:
> > + pm_runtime_mark_last_busy(this->dev);
> > + pm_runtime_put_autosuspend(this->dev);
> > return ret;
>
> Sascha
>
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2020-01-15 8:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-02 13:08 [PATCH 1/2] mtd: rawnand: gpmi: Fix suspend/resume problem Esben Haabendal
2020-01-02 13:08 ` [PATCH 2/2] mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume Esben Haabendal
2020-01-13 17:34 ` Han Xu
2020-01-14 17:03 ` Miquel Raynal
2020-01-07 19:31 ` [PATCH 1/2] mtd: rawnand: gpmi: Fix suspend/resume problem Han Xu
2020-01-09 15:15 ` Miquel Raynal
2020-01-09 17:11 ` Han Xu
2020-01-13 17:32 ` Han Xu
2020-01-14 17:03 ` Miquel Raynal
2020-01-14 17:09 ` Fabio Estevam
2020-01-14 17:25 ` Miquel Raynal
2020-01-14 17:29 ` Fabio Estevam
2020-01-15 7:46 ` Sascha Hauer
2020-01-15 8:46 ` Miquel Raynal [this message]
2020-01-17 19:48 ` Esben Haabendal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200115094638.1847f475@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=boris.brezillon@collabora.com \
--cc=esben@geanix.com \
--cc=han.xu@nxp.com \
--cc=linux-mtd@lists.infradead.org \
--cc=martin@geanix.com \
--cc=richard@nod.at \
--cc=s.hauer@pengutronix.de \
--cc=sean@geanix.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).