[PATCH v3 0/5] Add new series Micron SPI NAND devices

[PATCH v3 0/5] Add new series Micron SPI NAND devices

[shiva.linuxworks]

From: Shivamurthy Shastri <sshivamurthy@micron.com>

This patchset is for the new series of Micron SPI NAND devices, and the
following links are their datasheets.

M78A:
[1] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
[2] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf

M79A:
[3] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
[4] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf

M70A:
[5] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
[6] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
[7] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
[8] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf

Changes since v2:
-----------------

1. Modified the commit messages of the patches.
2. Handled devices with Continuous Read feature with vendor specific flag.
3. Reworked die selection function as per the comment.

Changes since v1:
-----------------

1. The patch split into multiple patches.
2. Added comments for selecting the die.

Shivamurthy Shastri (5):
  mtd: spinand: micron: Generalize the OOB layout structure and function
    names
  mtd: spinand: micron: Add new Micron SPI NAND devices
  mtd: spinand: identfiy SPI NAND device with Continuous Read mode
  mtd: spinand: micron: Add M70A series Micron SPI NAND devices
  mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
    dies

 drivers/mtd/nand/spi/micron.c | 153 ++++++++++++++++++++++++++++++----
 include/linux/mtd/spinand.h   |   1 +
 2 files changed, 140 insertions(+), 14 deletions(-)

-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 1/5] mtd: spinand: micron: Generalize the OOB layout structure and function names

[shiva.linuxworks]

From: Shivamurthy Shastri <sshivamurthy@micron.com>

In order to add new Micron SPI NAND devices, we generalized the OOB
layout structure and function names.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 7d7b1f7fcf71..c028d0d7e236 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -34,38 +34,38 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
-static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
-					struct mtd_oob_region *region)
+static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
-	region->offset = 64;
-	region->length = 64;
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
 
 	return 0;
 }
 
-static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *region)
+static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
 	/* Reserve 2 bytes for the BBM. */
 	region->offset = 2;
-	region->length = 62;
+	region->length = (mtd->oobsize / 2) - 2;
 
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
-	.ecc = mt29f2g01abagd_ooblayout_ecc,
-	.free = mt29f2g01abagd_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_8_ooblayout = {
+	.ecc = micron_8_ooblayout_ecc,
+	.free = micron_8_ooblayout_free,
 };
 
-static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
-					 u8 status)
+static int micron_8_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
 {
 	switch (status & MICRON_STATUS_ECC_MASK) {
 	case STATUS_ECC_NO_BITFLIPS:
@@ -98,8 +98,8 @@ static const struct spinand_info micron_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
-				     mt29f2g01abagd_ecc_get_status)),
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 2/5] mtd: spinand: micron: Add new Micron SPI NAND devices

[shiva.linuxworks]

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M79A and M78A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index c028d0d7e236..5fd1f921ef12 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -91,6 +91,7 @@ static int micron_8_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info micron_spinand_table[] = {
+	/* M79A 2Gb 3.3V */
 	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
 		     NAND_ECCREQ(8, 512),
@@ -100,6 +101,36 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 2Gb 1.8V */
+	SPINAND_INFO("MT29F2G01ABBGD", 0x25,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 3.3V */
+	SPINAND_INFO("MT29F1G01ABAFD", 0x14,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 1.8V */
+	SPINAND_INFO("MT29F1G01ABAFD", 0x15,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 3/5] mtd: spinand: identfiy SPI NAND device with Continuous Read mode

[shiva.linuxworks]

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with
the Continuous Read mode.

Currently, some of the Micron SPI NAND devices enable this feature by
default, and we need to identify them to disable while probing.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 include/linux/mtd/spinand.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 4ea558bd3c46..333149b2855f 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -270,6 +270,7 @@ struct spinand_ecc_info {
 };
 
 #define SPINAND_HAS_QE_BIT		BIT(0)
+#define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
 
 /**
  * struct spinand_info - Structure used to describe SPI NAND chips
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 4/5] mtd: spinand: micron: Add M70A series Micron SPI NAND devices

[shiva.linuxworks]

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M70A series Micron SPI NAND devices.

As opposed to the M79A and M78A series already supported, M70A parts
have the "Continuous Read" feature enabled by default, which does not fit
the subsystem needs.

In this mode, the READ CACHE command doesn't require the starting column
address. The device always output the data starting from the first
column of the cache register, and once the end of the cache register
reached, the data output continues through the next page. With the
continuous read mode, it is possible to read out the entire block using
a single READ command, and once the end of the block reached, the output
pins become High-Z state. However, during this mode the read command
doesn't output the OOB area.

Hence, we disable the feature at probe time.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 36 +++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 5fd1f921ef12..3d3734afc35e 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -18,6 +18,8 @@
 #define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
 #define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
 
+#define MICRON_CFG_CONTI_READ		BIT(0)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -131,6 +133,26 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ABAFD", 0x34,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 1.8V */
+	SPINAND_INFO("MT29F4G01ABBFD", 0x35,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
@@ -153,8 +175,22 @@ static int micron_spinand_detect(struct spinand_device *spinand)
 	return 1;
 }
 
+static int micron_spinand_init(struct spinand_device *spinand)
+{
+	/*
+	 * M70A device series enable Continuous Read feature at Power-up,
+	 * which is not supported. Disable this bit to avoid any possible
+	 * failure.
+	 */
+	if (spinand->flags == SPINAND_HAS_CR_FEAT_BIT)
+		return spinand_upd_cfg(spinand, MICRON_CFG_CONTI_READ, 0);
+
+	return 0;
+}
+
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
 	.detect = micron_spinand_detect,
+	.init = micron_spinand_init,
 };
 
 const struct spinand_manufacturer micron_spinand_manufacturer = {
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v3 4/5] mtd: spinand: micron: Add M70A series Micron SPI NAND devices

[Miquel Raynal]

Hi shiva.linuxworks@gmail.com,

shiva.linuxworks@gmail.com wrote on Sun,  2 Feb 2020 22:55:07 +0100:

> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for M70A series Micron SPI NAND devices.
> 
> As opposed to the M79A and M78A series already supported, M70A parts
> have the "Continuous Read" feature enabled by default, which does not fit
> the subsystem needs.
> 
> In this mode, the READ CACHE command doesn't require the starting column
> address. The device always output the data starting from the first
> column of the cache register, and once the end of the cache register
> reached, the data output continues through the next page. With the
> continuous read mode, it is possible to read out the entire block using
> a single READ command, and once the end of the block reached, the output
> pins become High-Z state. However, during this mode the read command
> doesn't output the OOB area.
> 
> Hence, we disable the feature at probe time.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> ---
>  drivers/mtd/nand/spi/micron.c | 36 +++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
> index 5fd1f921ef12..3d3734afc35e 100644
> --- a/drivers/mtd/nand/spi/micron.c
> +++ b/drivers/mtd/nand/spi/micron.c
> @@ -18,6 +18,8 @@
>  #define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
>  #define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
>  
> +#define MICRON_CFG_CONTI_READ		BIT(0)
> +
>  static SPINAND_OP_VARIANTS(read_cache_variants,
>  		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
>  		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
> @@ -131,6 +133,26 @@ static const struct spinand_info micron_spinand_table[] = {
>  		     0,
>  		     SPINAND_ECCINFO(&micron_8_ooblayout,
>  				     micron_8_ecc_get_status)),
> +	/* M70A 4Gb 3.3V */
> +	SPINAND_INFO("MT29F4G01ABAFD", 0x34,
> +		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     SPINAND_HAS_CR_FEAT_BIT,
> +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> +				     micron_8_ecc_get_status)),
> +	/* M70A 4Gb 1.8V */
> +	SPINAND_INFO("MT29F4G01ABBFD", 0x35,
> +		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     SPINAND_HAS_CR_FEAT_BIT,
> +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> +				     micron_8_ecc_get_status)),
>  };
>  
>  static int micron_spinand_detect(struct spinand_device *spinand)
> @@ -153,8 +175,22 @@ static int micron_spinand_detect(struct spinand_device *spinand)
>  	return 1;
>  }
>  
> +static int micron_spinand_init(struct spinand_device *spinand)
> +{
> +	/*
> +	 * M70A device series enable Continuous Read feature at Power-up,
> +	 * which is not supported. Disable this bit to avoid any possible
> +	 * failure.
> +	 */
> +	if (spinand->flags == SPINAND_HAS_CR_FEAT_BIT)
> +		return spinand_upd_cfg(spinand, MICRON_CFG_CONTI_READ, 0);
> +
> +	return 0;
> +}
> +
>  static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
>  	.detect = micron_spinand_detect,
> +	.init = micron_spinand_init,
>  };

I would move the addition of .init = ... and the function definition to
patch 3/5.

The logic is:
1/ You introduce the feature
2/ You add support for new devices and use this feature

>  
>  const struct spinand_manufacturer micron_spinand_manufacturer = {

Otherwise looks good.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 5/5] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies

[shiva.linuxworks]

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for new Micron SPI NAND devices, which have multiple
dies.

Also, enable support to select the dies.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 58 +++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 3d3734afc35e..84e1c109ad0c 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -20,6 +20,15 @@
 
 #define MICRON_CFG_CONTI_READ		BIT(0)
 
+/*
+ * As per datasheet, die selection is done by the 6th bit of Die
+ * Select Register (Address 0xD0).
+ */
+#define MICRON_DIE_SELECT_REG	0xD0
+
+#define MICRON_SELECT_DIE_0	0x00
+#define MICRON_SELECT_DIE_1	0x40
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -66,6 +75,22 @@ static const struct mtd_ooblayout_ops micron_8_ooblayout = {
 	.free = micron_8_ooblayout_free,
 };
 
+static int micron_select_target(struct spinand_device *spinand,
+				unsigned int target)
+{
+	struct spi_mem_op op = SPINAND_SET_FEATURE_OP(MICRON_DIE_SELECT_REG,
+						      spinand->scratchbuf);
+
+	if (target == 0)
+		*spinand->scratchbuf = MICRON_SELECT_DIE_0;
+	else if (target == 1)
+		*spinand->scratchbuf = MICRON_SELECT_DIE_1;
+	else
+		return -EINVAL;
+
+	return spi_mem_exec_op(spinand->spimem, &op);
+}
+
 static int micron_8_ecc_get_status(struct spinand_device *spinand,
 				   u8 status)
 {
@@ -133,6 +158,17 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ADAGD", 0x36,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 80, 2, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 	/* M70A 4Gb 3.3V */
 	SPINAND_INFO("MT29F4G01ABAFD", 0x34,
 		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
@@ -153,6 +189,28 @@ static const struct spinand_info micron_spinand_table[] = {
 		     SPINAND_HAS_CR_FEAT_BIT,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 8Gb 3.3V */
+	SPINAND_INFO("MT29F8G01ADAFD", 0x46,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
+	/* M70A 8Gb 1.8V */
+	SPINAND_INFO("MT29F8G01ADBFD", 0x47,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/