[PATCH] MIPS: c-r4k: Invalidate BMIPS5000 ZSCM prefetch lines

From: Kamal Dasu <kdasu.kdev@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Paul Burton <paulburton@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	linux-mips@vger.kernel.org, Ralf Baechle <ralf@linux-mips.org>,
	linaro-mm-sig@lists.linaro.org, Rob Herring <robh+dt@kernel.org>,
	linux-mtd@lists.infradead.org, dri-devel@lists.freedesktop.org,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	James Hogan <jhogan@kernel.org>,
	bcm-kernel-feedback-list@broadcom.com,
	Brian Norris <computersforpeace@gmail.com>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	linux-media@vger.kernel.org
Subject: [PATCH] MIPS: c-r4k: Invalidate BMIPS5000 ZSCM prefetch lines
Date: Thu,  6 Feb 2020 14:30:37 -0500	[thread overview]
Message-ID: <20200206193037.32041-1-kdasu.kdev@gmail.com> (raw)

Zephyr secondary cache is 256KB, 128B lines. 32B sectors. A secondary cache
line can contain two instruction cache lines (64B), or four data cache
lines (32B). Hardware prefetch Cache detects stream access, and prefetches
ahead of processor access. Add support to inavalidate BMIPS5000 cpu zephyr
secondary cache module (ZSCM) on DMA from device so that data returned is
coherent during DMA read operations.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 arch/mips/mm/c-r4k.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5f3d0103b95d..2d8892ba68ab 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -901,6 +901,35 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	__sync();
 }
 
+static void prefetch_cache_inv(unsigned long addr, unsigned long size)
+{
+	unsigned int linesz = cpu_scache_line_size();
+	unsigned long addr0 = addr, addr1;
+	int cpu_type = current_cpu_type();
+
+	if (cpu_type == CPU_BMIPS5000) {
+		/* invalidate zephyr secondary cache module prefetch lines */
+		addr0 &= ~(linesz - 1);
+		addr1 = (addr0 + size - 1) & ~(linesz - 1);
+
+		protected_writeback_scache_line(addr0);
+		if (likely(addr1 != addr0))
+			protected_writeback_scache_line(addr1);
+		else
+			return;
+
+		addr0 += linesz;
+		if (likely(addr1 != addr0))
+			protected_writeback_scache_line(addr0);
+		else
+			return;
+
+		addr1 -= linesz;
+		if (likely(addr1 > addr0))
+			protected_writeback_scache_line(addr0);
+	}
+}
+
 static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 {
 	/* Catch bad driver code */
@@ -908,6 +937,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 		return;
 
 	preempt_disable();
+	prefetch_cache_inv(addr, size);
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size) {
 			if (current_cpu_type() != CPU_LOONGSON64)
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
