From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 611CAC352A3 for ; Tue, 11 Feb 2020 13:36:51 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 1CC1C2070A for ; Tue, 11 Feb 2020 13:36:51 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="qa/h9Ugd"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=ti.com header.i=@ti.com header.b="Jhg6wlkN" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 1CC1C2070A Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-mtd-bounces+linux-mtd=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=KU6KMJdUyYu46zagfetJwZJd8YCtCTWE3T2sseZFp/Y=; b=qa/h9Ugde2i8Xo UrTAC6l7BxcQSPQ/XigLp2GpCEDzTxdx8UqqTU+UmsUsykte1ah65WFPn5YXyb4RT7WlNTVp/JcVt 40Jrz20lhN2qIZHXOKNzHlgkSL6LijoOlZ5S1VW8na8+z/whmAu3zaXmxaXgDtERu3M3qAQ+RBBhg DsJI+Yiypd5BulbOdBOVomEaauF+gR6WiB8308cgjZczVL8dZhAC9qxNWzvuMrQl2f3bRGRZKBSZF qVnrWcYELiCSAIUQu5r3qBes4t18MCW11QGN+rsHJS/KjfllmkJOlwvuDdxRDRryWo3w5Z16fNL/o SQN/NO21JS8qlzQdwIDw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1j1ViP-0007Cv-N0; Tue, 11 Feb 2020 13:36:37 +0000 Received: from fllv0016.ext.ti.com ([198.47.19.142]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1j1VgF-00044W-TE for linux-mtd@lists.infradead.org; Tue, 11 Feb 2020 13:34:26 +0000 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 01BDYKdc130383; Tue, 11 Feb 2020 07:34:20 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1581428060; bh=cMU0ZoHMNwzgF9wtY9YX2tbTzNdxYcwJkzgWGGefeMo=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=Jhg6wlkNB3FGRdFvDmQq232btvFOhQSs29CVGQtieeBpXUJ+UluQDZjIluiyEYEvk AzXgOR8UH8cqp6j3cp9MXy5WzFf+Hubv0UTRvqo7rsEi9on3nAAHq/faS8vEatptev 3Wu5j5hINqkDwP7fV53g0yiBdzsaLJsrrhuySH9M= Received: from DLEE111.ent.ti.com (dlee111.ent.ti.com [157.170.170.22]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 01BDYKEK026057; Tue, 11 Feb 2020 07:34:20 -0600 Received: from DLEE111.ent.ti.com (157.170.170.22) by DLEE111.ent.ti.com (157.170.170.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3; Tue, 11 Feb 2020 07:34:20 -0600 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE111.ent.ti.com (157.170.170.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3 via Frontend Transport; Tue, 11 Feb 2020 07:34:20 -0600 Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 01BDXm5Q087522; Tue, 11 Feb 2020 07:34:17 -0600 From: Pratyush Yadav To: Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Mark Brown Subject: [PATCH 9/9] mtd: spi-nor: add support for Cypress Semper flash Date: Tue, 11 Feb 2020 19:03:48 +0530 Message-ID: <20200211133348.15558-10-p.yadav@ti.com> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200211133348.15558-1-p.yadav@ti.com> References: <20200211133348.15558-1-p.yadav@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200211_053424_055468_C977D7A8 X-CRM114-Status: GOOD ( 21.08 ) X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Sekhar Nori , linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org, Pratyush Yadav , linux-spi@vger.kernel.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-mtd" Errors-To: linux-mtd-bounces+linux-mtd=archiver.kernel.org@lists.infradead.org The Cypress Semper flash is an xSPI compliant octal DTR flash. Add support for using it in octal DTR mode. The flash by default boots in a hybrid sector mode. Switch to uniform sector mode on boot. Use the default 20 dummy cycles for a read fast command. The SFDP programming on some older versions of the flash was incorrect. Fixes for that are included in the fixup hooks. Signed-off-by: Pratyush Yadav --- drivers/mtd/spi-nor/spi-nor.c | 192 ++++++++++++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 14 +++ 2 files changed, 206 insertions(+) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 78e3475fa2a9..367e3d0f65aa 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -260,6 +260,12 @@ struct flash_info { #define JEDEC_MFR(info) ((info)->id[0]) +/* Forward declarations that will be used by s28hs512t_setup(). */ +static int spi_nor_default_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps); +static void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, + u8 opcode, enum spi_nor_protocol proto); + /** * spi_nor_spimem_setup_op() - Set up common properties of a spi-mem op. * @nor: pointer to a 'struct spi_nor' @@ -2241,6 +2247,65 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } +/** + * spi_nor_cypress_octal_enable() - Enable octal DTR mode on Cypress flashes. + * @nor: pointer to a 'struct spi_nor' + * + * This also sets the memory access latency cycles to 20, which is the default + * in the spi-nor framework. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_cypress_octal_enable(struct spi_nor *nor) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + /* Use 20 dummy cycles for memory array reads. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + *buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20; + op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR2V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, + "failed to set default memory latency value: %d\n", + ret); + return ret; + } + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].num_wait_states = 20; + nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].num_mode_clocks = 0; + + /* Set the octal and DTR enable bits. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN; + op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR5V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, "Failed to enable octal DTR mode\n"); + return ret; + } + + return 0; +} + /** * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status * Register 1. @@ -2453,6 +2518,130 @@ static struct spi_nor_fixups gd25q256_fixups = { .default_init = gd25q256_default_init, }; +static int s28hs512t_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + if (!nor->spimem) { + dev_err(nor->dev, + "operation not supported for non-spimem drivers\n"); + return -ENOTSUPP; + } + + /* + * This Cypress flash also supports hybrid sector sizes. Make sure + * uniform sector mode is selected. This is done by setting the bit + * CFR3N[3]. + */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3N, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + /* Set the uniform sector mode bit. */ + *buf |= SPINOR_REG_CYPRESS_CFR3N_UNISECT; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3N, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_err(nor->dev, "Failed to change to uniform sector mode\n"); + return ret; + } + + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + return spi_nor_default_setup(nor, hwcaps); +} + +static void s28hs512t_default_init(struct spi_nor *nor) +{ + nor->params.octal_dtr_enable = spi_nor_cypress_octal_enable; + nor->params.setup = s28hs512t_setup; +} + +static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor) +{ + /* + * On older versions of the flash the xSPI Profile 1.0 table has the + * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE. + */ + if (nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) + nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode = + SPINOR_OP_CYPRESS_RD_FAST; + + /* This flash is also missing the 4-byte Page Program opcode bit. */ + spi_nor_set_pp_settings(&nor->params.page_programs[SNOR_CMD_PP], + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + /* + * Since xSPI Page Program opcode is backward compatible with + * Legacy SPI, use Legacy SPI opcode there as well. + */ + spi_nor_set_pp_settings(&nor->params.page_programs[SNOR_CMD_PP_8_8_8_DTR], + SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); + + /* + * The xSPI Profile 1.0 table advertises the number of additional + * address bytes needed for Read Status Register command as 0 but the + * actual value for that is 4. + */ + nor->params.rdsr_addr_nbytes = 4; +} + +static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + /* + * The BFPT table advertises a 512B page size but the page size is + * actually configurable (with the default being 256B). Read from + * CFR3V[4] and set the correct size. + */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + if (*buf & SPINOR_REG_CYPRESS_CFR3V_PGSZ) + params->page_size = 512; + else + params->page_size = 256; + + return 0; +} + +static struct spi_nor_fixups s28hs512t_fixups = { + .default_init = s28hs512t_default_init, + .post_sfdp = s28hs512t_post_sfdp_fixup, + .post_bfpt = s28hs512t_post_bfpt_fixup, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -2715,6 +2904,9 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256, SECT_4K | SPI_NOR_OCTAL_DTR_READ) + .fixups = &s28hs512t_fixups, + }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index c653f6713cfc..e765272fc0f4 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -150,6 +150,20 @@ #define SR2_QUAD_EN_BIT1 BIT(1) #define SR2_QUAD_EN_BIT7 BIT(7) +/* For Cypress flash. */ +#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ +#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ +#define SPINOR_REG_CYPRESS_CFR2V 0x00800003 +#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20 0x8 +#define SPINOR_REG_CYPRESS_CFR3N 0x00000004 +#define SPINOR_REG_CYPRESS_CFR3V 0x00800004 +#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */ +#define SPINOR_REG_CYPRESS_CFR3N_UNISECT BIT(3) /* Uniform sector mode */ +#define SPINOR_REG_CYPRESS_CFR4V 0x00800005 +#define SPINOR_REG_CYPRESS_CFR5V 0x00800006 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3 +#define SPINOR_OP_CYPRESS_RD_FAST 0xee + /* Supported SPI protocols */ #define SNOR_PROTO_INST_MASK GENMASK(23, 16) #define SNOR_PROTO_INST_SHIFT 16 -- 2.25.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/