linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@collabora.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-mtd@lists.infradead.org, Sekhar Nori <nsekhar@ti.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Richard Weinberger <richard@nod.at>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH 4/5] mtd: rawnand: davinci: Get rid of the legacy interface implementation
Date: Fri,  1 May 2020 12:07:28 +0200	[thread overview]
Message-ID: <20200501100729.1237040-5-boris.brezillon@collabora.com> (raw)
In-Reply-To: <20200501100729.1237040-1-boris.brezillon@collabora.com>

Now that exec_op() is implemented we can get rid of the legacy interface
implementation.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/raw/davinci_nand.c | 54 -----------------------------
 1 file changed, 54 deletions(-)

diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 296047884c6a..c629e1a6ed71 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -81,38 +81,6 @@ static inline void davinci_nand_writel(struct davinci_nand_info *info,
 
 /*----------------------------------------------------------------------*/
 
-/*
- * Access to hardware control lines:  ALE, CLE, secondary chipselect.
- */
-
-static void nand_davinci_hwcontrol(struct nand_chip *nand, int cmd,
-				   unsigned int ctrl)
-{
-	struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(nand));
-	void __iomem			*addr = info->current_cs;
-
-	if (ctrl & NAND_CTRL_CLE)
-		addr += info->mask_cle;
-	else if (ctrl & NAND_CTRL_ALE)
-		addr += info->mask_ale;
-
-	if (cmd != NAND_CMD_NONE)
-		iowrite8(cmd, addr);
-}
-
-static void nand_davinci_select_chip(struct nand_chip *nand, int chip)
-{
-	struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(nand));
-
-	info->current_cs = info->vaddr;
-
-	/* maybe kick in a second chipselect */
-	if (chip > 0)
-		info->current_cs += info->mask_chipsel;
-}
-
-/*----------------------------------------------------------------------*/
-
 /*
  * 1-bit hardware ECC ... context maintained for each core chipselect
  */
@@ -440,17 +408,6 @@ static void nand_davinci_write_buf(struct nand_chip *chip, const uint8_t *buf,
 		iowrite8_rep(info->current_cs, buf, len);
 }
 
-/*
- * Check hardware register for wait status. Returns 1 if device is ready,
- * 0 if it is still busy.
- */
-static int nand_davinci_dev_ready(struct nand_chip *chip)
-{
-	struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
-
-	return davinci_nand_readl(info, NANDFSR_OFFSET) & BIT(0);
-}
-
 /*----------------------------------------------------------------------*/
 
 /* An ECC layout for using 4-bit ECC with small-page flash, storing
@@ -813,9 +770,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	mtd->dev.parent		= &pdev->dev;
 	nand_set_flash_node(&info->chip, pdev->dev.of_node);
 
-	info->chip.legacy.chip_delay	= 0;
-	info->chip.legacy.select_chip	= nand_davinci_select_chip;
-
 	/* options such as NAND_BBT_USE_FLASH */
 	info->chip.bbt_options	= pdata->bbt_options;
 	/* options such as 16-bit widths */
@@ -832,14 +786,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	info->mask_ale		= pdata->mask_ale ? : MASK_ALE;
 	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
 
-	/* Set address of hardware control function */
-	info->chip.legacy.cmd_ctrl	= nand_davinci_hwcontrol;
-	info->chip.legacy.dev_ready	= nand_davinci_dev_ready;
-
-	/* Speed up buffer I/O */
-	info->chip.legacy.read_buf     = nand_davinci_read_buf;
-	info->chip.legacy.write_buf    = nand_davinci_write_buf;
-
 	/* Use board-specific ECC config */
 	info->chip.ecc.mode	= pdata->ecc_mode;
 
-- 
2.25.3


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2020-05-01 10:08 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-01 10:07 [PATCH 0/5] mtd: rawnand: davinci: Convert to exec_op() Boris Brezillon
2020-05-01 10:07 ` [PATCH 1/5] mtd: rawnand: davinci: Inherit from nand_controller Boris Brezillon
2020-05-10 21:35   ` Miquel Raynal
2020-05-01 10:07 ` [PATCH 2/5] mtd: rawnand: davinci: Stop using nand_chip.legacy.IO_ADDR_{R, W} Boris Brezillon
2020-05-10 21:37   ` [PATCH 2/5] mtd: rawnand: davinci: Stop using nand_chip.legacy.IO_ADDR_{R,W} Miquel Raynal
2020-05-01 10:07 ` [PATCH 3/5] mtd: rawnand: davinci: Implement exec_op() Boris Brezillon
2020-05-01 10:07 ` Boris Brezillon [this message]
2020-05-10 21:38   ` [PATCH 4/5] mtd: rawnand: davinci: Get rid of the legacy interface implementation Miquel Raynal
2020-05-01 10:07 ` [PATCH 5/5] mtd: rawnand: davinci: Change the {read, write}_buf prototypes Boris Brezillon
2020-05-10 21:39   ` [PATCH 5/5] mtd: rawnand: davinci: Change the {read,write}_buf prototypes Miquel Raynal
2020-05-04 16:34 ` [PATCH 0/5] mtd: rawnand: davinci: Convert to exec_op() Bartosz Golaszewski
2020-05-04 20:06   ` Boris Brezillon
2020-05-09 14:13   ` Boris Brezillon
2020-05-12  8:40     ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200501100729.1237040-5-boris.brezillon@collabora.com \
    --to=boris.brezillon@collabora.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=nsekhar@ti.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).