linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@collabora.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Rickard x Andersson <rickaran@axis.com>,
	Michal Simek <monstr@monstr.eu>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Richard Weinberger <richard@nod.at>,
	Naga Sureshkumar Relli <nagasure@xilinx.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-mtd@lists.infradead.org
Subject: Re: [PATCH v7 26/28] mtd: rawnand: toshiba: Choose the interface configuration for TH58NVG2S3HBAI4
Date: Fri, 29 May 2020 13:33:11 +0200	[thread overview]
Message-ID: <20200529133311.28a8123d@collabora.com> (raw)
In-Reply-To: <20200529111322.7184-27-miquel.raynal@bootlin.com>

On Fri, 29 May 2020 13:13:20 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> From: Rickard x Andersson <rickaran@axis.com>
> 
> The Kioxia/Toshiba TH58NVG2S3HBAI4 NAND memory is not ONFI compliant.
> The timings of the NAND chip memory are quite close to ONFI mode 4 but
> is breaking that spec.
> 
> By providing our own set of timings, erase block read speed is increased
> from 6910 kiB/s to 13490 kiB/s and erase block write speed is increased
> from 3350 kiB/s to 4410 kiB/s.
> 
> Tested on IMX6SX which has a NAND controller supporting EDO mode.
> 
> Signed-off-by: Rickard x Andersson <rickaran@axis.com>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

> ---
>  drivers/mtd/nand/raw/nand_ids.c     |  3 +++
>  drivers/mtd/nand/raw/nand_toshiba.c | 38 +++++++++++++++++++++++++++++
>  2 files changed, 41 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
> index 3b890d55703d..b9945791a9d7 100644
> --- a/drivers/mtd/nand/raw/nand_ids.c
> +++ b/drivers/mtd/nand/raw/nand_ids.c
> @@ -51,6 +51,9 @@ struct nand_flash_dev nand_flash_ids[] = {
>  		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
>  		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
>  		  NAND_ECC_INFO(40, SZ_1K) },
> +	{"TH58NVG2S3HBAI4 4G 3.3V 8-bit",
> +		{ .id = {0x98, 0xdc, 0x91, 0x15, 0x76} },
> +		  SZ_2K, SZ_512, SZ_128K, 0, 5, 128, NAND_ECC_INFO(8, SZ_512) },
>  
>  	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
>  	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
> diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
> index 6d53f9b7a817..f746c19f3b2c 100644
> --- a/drivers/mtd/nand/raw/nand_toshiba.c
> +++ b/drivers/mtd/nand/raw/nand_toshiba.c
> @@ -212,6 +212,33 @@ tc58nvg0s3e_choose_interface_config(struct nand_chip *chip,
>  	return nand_choose_best_sdr_timings(chip, iface, NULL);
>  }
>  
> +static int
> +th58nvg2s3hbai4_choose_interface_config(struct nand_chip *chip,
> +					struct nand_interface_config *iface)
> +{
> +	struct nand_sdr_timings *sdr = &iface->timings.sdr;
> +
> +	/* Start with timings from the closest timing mode, mode 4. */
> +	onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4);
> +
> +	/* Patch timings that differ from mode 4. */
> +	sdr->tALS_min = 12000;
> +	sdr->tCHZ_max = 20000;
> +	sdr->tCLS_min = 12000;
> +	sdr->tCOH_min = 0;
> +	sdr->tDS_min = 12000;
> +	sdr->tRHOH_min = 25000;
> +	sdr->tRHW_min = 30000;
> +	sdr->tRHZ_max = 60000;
> +	sdr->tWHR_min = 60000;
> +
> +	/* Patch timings not part of onfi timing mode. */
> +	sdr->tPROG_max = 700000000;
> +	sdr->tBERS_max = 5000000000;
> +
> +	return nand_choose_best_sdr_timings(chip, iface, sdr);
> +}
> +
>  static int tc58teg5dclta00_init(struct nand_chip *chip)
>  {
>  	struct mtd_info *mtd = nand_to_mtd(chip);
> @@ -232,6 +259,14 @@ static int tc58nvg0s3e_init(struct nand_chip *chip)
>  	return 0;
>  }
>  
> +static int th58nvg2s3hbai4_init(struct nand_chip *chip)
> +{
> +	chip->ops.choose_interface_config =
> +		&th58nvg2s3hbai4_choose_interface_config;
> +
> +	return 0;
> +}
> +
>  static int toshiba_nand_init(struct nand_chip *chip)
>  {
>  	if (nand_is_slc(chip))
> @@ -247,6 +282,9 @@ static int toshiba_nand_init(struct nand_chip *chip)
>  	if (!strncmp("TC58NVG0S3E", chip->parameters.model,
>  		     sizeof("TC58NVG0S3E") - 1))
>  		tc58nvg0s3e_init(chip);
> +	if (!strncmp("TH58NVG2S3HBAI4", chip->parameters.model,
> +		     sizeof("TH58NVG2S3HBAI4") - 1))
> +		th58nvg2s3hbai4_init(chip);
>  
>  	return 0;
>  }


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-05-29 11:33 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-29 11:12 [PATCH v7 00/28] Allow vendor drivers to propose their own timings Miquel Raynal
2020-05-29 11:12 ` [PATCH v7 01/28] mtd: rawnand: Use unsigned types for nand_chip unsigned values Miquel Raynal
2020-06-15  9:07   ` Miquel Raynal
2020-05-29 11:12 ` [PATCH v7 02/28] mtd: rawnand: Only use u8 instead of uint8_t in nand_chip structure Miquel Raynal
2020-06-15  9:07   ` Miquel Raynal
2020-05-29 11:12 ` [PATCH v7 03/28] mtd: rawnand: Create a nand_chip operations structure Miquel Raynal
2020-06-15  9:07   ` Miquel Raynal
2020-05-29 11:12 ` [PATCH v7 04/28] mtd: rawnand: Rename the manufacturer structure Miquel Raynal
2020-06-15  9:06   ` Miquel Raynal
2020-05-29 11:12 ` [PATCH v7 05/28] mtd: rawnand: Declare the nand_manufacturer structure out of nand_chip Miquel Raynal
2020-06-15  9:06   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 06/28] mtd: rawnand: Reorganize the nand_chip structure Miquel Raynal
2020-06-15  9:06   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 07/28] mtd: rawnand: Compare the actual timing values Miquel Raynal
2020-06-15  9:06   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 08/28] mtd: rawnand: Use the data interface mode entry when relevant Miquel Raynal
2020-06-15  9:06   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 09/28] mtd: rawnand: Rename nand_has_setup_data_iface() Miquel Raynal
2020-06-15  9:05   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 10/28] mtd: rawnand: Fix nand_setup_data_interface() description Miquel Raynal
2020-06-15  9:05   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 11/28] mtd: rawnand: Rename nand_init_data_interface() Miquel Raynal
2020-06-15  9:05   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 12/28] mtd: rawnand: timings: Update onfi_fill_data_interface() kernel doc Miquel Raynal
2020-06-15  9:05   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 13/28] mtd: rawnand: timings: Provide onfi_fill_data_interface() with a data interface Miquel Raynal
2020-06-15  9:05   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 14/28] mtd: rawnand: timings: onfi_fill_data_interface timing mode is unsigned Miquel Raynal
2020-05-29 11:28   ` Boris Brezillon
2020-06-15  9:05   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 15/28] mtd: rawnand: timings: Add a helper to find the closest ONFI mode Miquel Raynal
2020-06-15  9:04   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 16/28] mtd: rawnand: timings: Avoid redefining tR_max and tCCS_min Miquel Raynal
2020-05-29 11:25   ` Boris Brezillon
2020-06-15  9:04   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 17/28] mtd: rawnand: timings: Use default values for tPROG_max and tBERS_max Miquel Raynal
2020-06-15  9:04   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 18/28] mtd: rawnand: Hide the chip->data_interface indirection Miquel Raynal
2020-05-29 11:26   ` Boris Brezillon
2020-06-15  9:04   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 19/28] mtd: rawnand: s/data_interface/interface_config/ Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 20/28] mtd: rawnand: timings: Make onfi_fill_interface_config() a void helper Miquel Raynal
2020-05-29 11:29   ` Boris Brezillon
2020-06-15  9:04   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 21/28] mtd: rawnand: Introduce nand_choose_best_sdr_timings() Miquel Raynal
2020-05-29 11:30   ` Boris Brezillon
2020-06-15  9:04   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 22/28] mtd: rawnand: Add the ->choose_interface_config() hook Miquel Raynal
2020-05-29 11:31   ` Boris Brezillon
2020-05-29 11:32     ` Miquel Raynal
2020-06-15  9:03   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 23/28] mtd: rawnand: toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 Miquel Raynal
2020-06-15  9:03   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 24/28] mtd: rawnand: toshiba: Implement ->choose_interface_config() for TC58NVG0S3E Miquel Raynal
2020-06-15  9:03   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 25/28] mtd: rawnand: hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC Miquel Raynal
2020-06-15  9:03   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 26/28] mtd: rawnand: toshiba: Choose the interface configuration for TH58NVG2S3HBAI4 Miquel Raynal
2020-05-29 11:33   ` Boris Brezillon [this message]
2020-06-15  9:03   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 27/28] mtd: rawnand: Get rid of the default ONFI timing mode Miquel Raynal
2020-06-15  9:02   ` Miquel Raynal
2020-05-29 11:13 ` [PATCH v7 28/28] mtd: rawnand: Allocate the interface configurations dynamically Miquel Raynal
2020-05-29 11:37   ` Boris Brezillon
2020-05-29 11:41     ` Boris Brezillon
2020-05-29 11:43       ` Miquel Raynal
2020-05-29 11:49         ` Boris Brezillon
2020-05-29 11:52           ` Miquel Raynal
2020-06-15  9:02   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200529133311.28a8123d@collabora.com \
    --to=boris.brezillon@collabora.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=monstr@monstr.eu \
    --cc=nagasure@xilinx.com \
    --cc=richard@nod.at \
    --cc=rickaran@axis.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).