linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <miquel.raynal@bootlin.com>, <boris.brezillon@collabora.com>
Cc: alexandre.belloni@bootlin.com, ludovic.desroches@microchip.com,
	linux-mtd@lists.infradead.org, nicolas.ferre@microchip.com,
	Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH v4 6/6] mtd: rawnand: atmel: Get rid of the legacy interface implementation
Date: Mon, 20 Jul 2020 07:27:59 +0300	[thread overview]
Message-ID: <20200720042759.1482341-7-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20200720042759.1482341-1-tudor.ambarus@microchip.com>

From: Boris Brezillon <boris.brezillon@collabora.com>

Now that exec_op() is implemented, we can get rid of all the legacy
hooks.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/nand/raw/atmel/nand-controller.c | 198 +------------------
 1 file changed, 1 insertion(+), 197 deletions(-)

diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index ffeda6a1d1b3..e660d442fcca 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -417,133 +417,6 @@ static int atmel_nand_dma_transfer(struct atmel_nand_controller *nc,
 	return -EIO;
 }
 
-static u8 atmel_nand_read_byte(struct nand_chip *chip)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-
-	return ioread8(nand->activecs->io.virt);
-}
-
-static void atmel_nand_write_byte(struct nand_chip *chip, u8 byte)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-
-	if (chip->options & NAND_BUSWIDTH_16)
-		iowrite16(byte | (byte << 8), nand->activecs->io.virt);
-	else
-		iowrite8(byte, nand->activecs->io.virt);
-}
-
-static void atmel_nand_read_buf(struct nand_chip *chip, u8 *buf, int len)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_nand_controller *nc;
-
-	nc = to_nand_controller(chip->controller);
-
-	/*
-	 * If the controller supports DMA, the buffer address is DMA-able and
-	 * len is long enough to make DMA transfers profitable, let's trigger
-	 * a DMA transfer. If it fails, fallback to PIO mode.
-	 */
-	if (nc->dmac && virt_addr_valid(buf) &&
-	    len >= MIN_DMA_LEN &&
-	    !atmel_nand_dma_transfer(nc, buf, nand->activecs->io.dma, len,
-				     DMA_FROM_DEVICE))
-		return;
-
-	if (chip->options & NAND_BUSWIDTH_16)
-		ioread16_rep(nand->activecs->io.virt, buf, len / 2);
-	else
-		ioread8_rep(nand->activecs->io.virt, buf, len);
-}
-
-static void atmel_nand_write_buf(struct nand_chip *chip, const u8 *buf, int len)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_nand_controller *nc;
-
-	nc = to_nand_controller(chip->controller);
-
-	/*
-	 * If the controller supports DMA, the buffer address is DMA-able and
-	 * len is long enough to make DMA transfers profitable, let's trigger
-	 * a DMA transfer. If it fails, fallback to PIO mode.
-	 */
-	if (nc->dmac && virt_addr_valid(buf) &&
-	    len >= MIN_DMA_LEN &&
-	    !atmel_nand_dma_transfer(nc, (void *)buf, nand->activecs->io.dma,
-				     len, DMA_TO_DEVICE))
-		return;
-
-	if (chip->options & NAND_BUSWIDTH_16)
-		iowrite16_rep(nand->activecs->io.virt, buf, len / 2);
-	else
-		iowrite8_rep(nand->activecs->io.virt, buf, len);
-}
-
-static int atmel_nand_dev_ready(struct nand_chip *chip)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-
-	return gpiod_get_value(nand->activecs->rb.gpio);
-}
-
-static void atmel_nand_select_chip(struct nand_chip *chip, int cs)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-
-	if (cs < 0 || cs >= nand->numcs) {
-		nand->activecs = NULL;
-		chip->legacy.dev_ready = NULL;
-		return;
-	}
-
-	nand->activecs = &nand->cs[cs];
-
-	if (nand->activecs->rb.type == ATMEL_NAND_GPIO_RB)
-		chip->legacy.dev_ready = atmel_nand_dev_ready;
-}
-
-static int atmel_hsmc_nand_dev_ready(struct nand_chip *chip)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_hsmc_nand_controller *nc;
-	u32 status;
-
-	nc = to_hsmc_nand_controller(chip->controller);
-
-	regmap_read(nc->base.smc, ATMEL_HSMC_NFC_SR, &status);
-
-	return status & ATMEL_HSMC_NFC_SR_RBEDGE(nand->activecs->rb.id);
-}
-
-static void atmel_hsmc_nand_select_chip(struct nand_chip *chip, int cs)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_hsmc_nand_controller *nc;
-
-	nc = to_hsmc_nand_controller(chip->controller);
-
-	atmel_nand_select_chip(chip, cs);
-
-	if (!nand->activecs)
-		return;
-
-	if (nand->activecs->rb.type == ATMEL_NAND_NATIVE_RB)
-		chip->legacy.dev_ready = atmel_hsmc_nand_dev_ready;
-
-	regmap_update_bits(nc->base.smc, ATMEL_HSMC_NFC_CFG,
-			   ATMEL_HSMC_NFC_CFG_PAGESIZE_MASK |
-			   ATMEL_HSMC_NFC_CFG_SPARESIZE_MASK |
-			   ATMEL_HSMC_NFC_CFG_RSPARE |
-			   ATMEL_HSMC_NFC_CFG_WSPARE,
-			   ATMEL_HSMC_NFC_CFG_PAGESIZE(mtd->writesize) |
-			   ATMEL_HSMC_NFC_CFG_SPARESIZE(mtd->oobsize) |
-			   ATMEL_HSMC_NFC_CFG_RSPARE);
-}
-
 static int atmel_nfc_exec_op(struct atmel_hsmc_nand_controller *nc, bool poll)
 {
 	u8 *addrs = nc->op.addrs;
@@ -594,53 +467,6 @@ static int atmel_nfc_exec_op(struct atmel_hsmc_nand_controller *nc, bool poll)
 	return ret;
 }
 
-static void atmel_hsmc_nand_cmd_ctrl(struct nand_chip *chip, int dat,
-				     unsigned int ctrl)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_hsmc_nand_controller *nc;
-
-	nc = to_hsmc_nand_controller(chip->controller);
-
-	if (ctrl & NAND_ALE) {
-		if (nc->op.naddrs == ATMEL_NFC_MAX_ADDR_CYCLES)
-			return;
-
-		nc->op.addrs[nc->op.naddrs++] = dat;
-	} else if (ctrl & NAND_CLE) {
-		if (nc->op.ncmds > 1)
-			return;
-
-		nc->op.cmds[nc->op.ncmds++] = dat;
-	}
-
-	if (dat == NAND_CMD_NONE) {
-		nc->op.cs = nand->activecs->id;
-		atmel_nfc_exec_op(nc, true);
-	}
-}
-
-static void atmel_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				unsigned int ctrl)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_nand_controller *nc;
-
-	nc = to_nand_controller(chip->controller);
-
-	if ((ctrl & NAND_CTRL_CHANGE) && nand->activecs->csgpio) {
-		if (ctrl & NAND_NCE)
-			gpiod_set_value(nand->activecs->csgpio, 0);
-		else
-			gpiod_set_value(nand->activecs->csgpio, 1);
-	}
-
-	if (ctrl & NAND_ALE)
-		writeb(cmd, nand->activecs->io.virt + nc->caps->ale_offs);
-	else if (ctrl & NAND_CLE)
-		writeb(cmd, nand->activecs->io.virt + nc->caps->cle_offs);
-}
-
 static void atmel_nand_data_in(struct atmel_nand *nand, void *buf,
 			       unsigned int len, bool force_8bit)
 {
@@ -1721,19 +1547,9 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
 	mtd->dev.parent = nc->dev;
 	nand->base.controller = &nc->base;
 
-	chip->legacy.cmd_ctrl = atmel_nand_cmd_ctrl;
-	chip->legacy.read_byte = atmel_nand_read_byte;
-	chip->legacy.write_byte = atmel_nand_write_byte;
-	chip->legacy.read_buf = atmel_nand_read_buf;
-	chip->legacy.write_buf = atmel_nand_write_buf;
-	chip->legacy.select_chip = atmel_nand_select_chip;
-
 	if (!nc->mck || !nc->caps->ops->setup_interface)
 		chip->options |= NAND_KEEP_TIMINGS;
 
-	/* Some NANDs require a longer delay than the default one (20us). */
-	chip->legacy.chip_delay = 40;
-
 	/*
 	 * Use a bounce buffer when the buffer passed by the MTD user is not
 	 * suitable for DMA.
@@ -1772,18 +1588,6 @@ static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
 				   smc_nc->ebi_csa->nfd0_on_d16);
 }
 
-static void atmel_hsmc_nand_init(struct atmel_nand_controller *nc,
-				 struct atmel_nand *nand)
-{
-	struct nand_chip *chip = &nand->base;
-
-	atmel_nand_init(nc, nand);
-
-	/* Overload some methods for the HSMC controller. */
-	chip->legacy.cmd_ctrl = atmel_hsmc_nand_cmd_ctrl;
-	chip->legacy.select_chip = atmel_hsmc_nand_select_chip;
-}
-
 static int atmel_nand_controller_remove_nand(struct atmel_nand *nand)
 {
 	struct nand_chip *chip = &nand->base;
@@ -2568,7 +2372,7 @@ static const struct atmel_nand_controller_ops atmel_hsmc_nc_ops = {
 	.probe = atmel_hsmc_nand_controller_probe,
 	.remove = atmel_hsmc_nand_controller_remove,
 	.ecc_init = atmel_hsmc_nand_ecc_init,
-	.nand_init = atmel_hsmc_nand_init,
+	.nand_init = atmel_nand_init,
 	.setup_interface = atmel_hsmc_nand_setup_interface,
 	.exec_op = atmel_hsmc_nand_exec_op,
 };
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

      parent reply	other threads:[~2020-07-20  4:29 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-20  4:27 [PATCH v4 0/6] mtd: rawnand: atmel: Convert the driver to exec_op() Tudor Ambarus
2020-07-20  4:27 ` [PATCH v4 1/6] mtd: rawnand: atmel: Enable the NFC controller at probe time Tudor Ambarus
2020-07-20  4:27 ` [PATCH v4 2/6] mtd: rawnand: atmel: Drop redundant nand_read_page_op() Tudor Ambarus
2020-07-20  4:27 ` [PATCH v4 3/6] mtd: rawnand: atmel: Use nand_{write,read}_data_op() Tudor Ambarus
2020-07-20  4:27 ` [PATCH v4 4/6] mtd: rawnand: atmel: Use nand_prog_page_end_op() Tudor Ambarus
2020-07-20  4:27 ` [PATCH v4 5/6] mtd: rawnand: atmel: Convert the driver to exec_op() Tudor Ambarus
2020-07-20 11:52   ` Boris Brezillon
2020-07-20  4:27 ` Tudor Ambarus [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200720042759.1482341-7-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=nicolas.ferre@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).