Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-raid@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
	Minchan Kim <minchan@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	linux-kernel@vger.kernel.org, linux-block@vger.kernel.org,
	Song Liu <song@kernel.org>,
	dm-devel@redhat.com, linux-mtd@lists.infradead.org,
	linux-fsdevel@vger.kernel.org, cgroups@vger.kernel.org,
	linux-mm@kvack.org, drbd-dev@lists.linbit.com
Subject: [PATCH 10/14] bdi: remove BDI_CAP_SYNCHRONOUS_IO
Date: Fri, 24 Jul 2020 09:33:09 +0200
Message-ID: <20200724073313.138789-11-hch@lst.de> (raw)
In-Reply-To: <20200724073313.138789-1-hch@lst.de>

BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to
decided if ->rw_page can be used on a block device.  Just check up for
the method instead.  The only complication is that zram needs a second
set of block_device_operations as it can switch between modes that
actually support ->rw_page and those who don't.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/brd.c           |  1 -
 drivers/block/zram/zram_drv.c | 19 +++++++++++++------
 drivers/nvdimm/btt.c          |  2 --
 drivers/nvdimm/pmem.c         |  1 -
 include/linux/backing-dev.h   |  9 ---------
 mm/swapfile.c                 |  2 +-
 6 files changed, 14 insertions(+), 20 deletions(-)

diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 2723a70eb85593..cc49a921339f77 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -403,7 +403,6 @@ static struct brd_device *brd_alloc(int i)
 	disk->flags		= GENHD_FL_EXT_DEVT;
 	sprintf(disk->disk_name, "ram%d", i);
 	set_capacity(disk, rd_size * 2);
-	brd->brd_queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
 
 	/* Tell the block layer that this is not a rotational device */
 	blk_queue_flag_set(QUEUE_FLAG_NONROT, brd->brd_queue);
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 9100ac36670afc..d73ddf018fa65f 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -52,6 +52,9 @@ static unsigned int num_devices = 1;
  */
 static size_t huge_class_size;
 
+static const struct block_device_operations zram_devops;
+static const struct block_device_operations zram_wb_devops;
+
 static void zram_free_page(struct zram *zram, size_t index);
 static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
 				u32 index, int offset, struct bio *bio);
@@ -408,8 +411,7 @@ static void reset_bdev(struct zram *zram)
 	zram->backing_dev = NULL;
 	zram->old_block_size = 0;
 	zram->bdev = NULL;
-	zram->disk->queue->backing_dev_info->capabilities |=
-				BDI_CAP_SYNCHRONOUS_IO;
+	zram->disk->fops = &zram_devops;
 	kvfree(zram->bitmap);
 	zram->bitmap = NULL;
 }
@@ -528,8 +530,7 @@ static ssize_t backing_dev_store(struct device *dev,
 	 * freely but in fact, IO is going on so finally could cause
 	 * use-after-free when the IO is really done.
 	 */
-	zram->disk->queue->backing_dev_info->capabilities &=
-			~BDI_CAP_SYNCHRONOUS_IO;
+	zram->disk->fops = &zram_wb_devops;
 	up_write(&zram->init_lock);
 
 	pr_info("setup backing device %s\n", file_name);
@@ -1819,6 +1820,13 @@ static const struct block_device_operations zram_devops = {
 	.owner = THIS_MODULE
 };
 
+static const struct block_device_operations zram_wb_devops = {
+	.open = zram_open,
+	.submit_bio = zram_submit_bio,
+	.swap_slot_free_notify = zram_slot_free_notify,
+	.owner = THIS_MODULE
+};
+
 static DEVICE_ATTR_WO(compact);
 static DEVICE_ATTR_RW(disksize);
 static DEVICE_ATTR_RO(initstate);
@@ -1946,8 +1954,7 @@ static int zram_add(void)
 	if (ZRAM_LOGICAL_BLOCK_SIZE == PAGE_SIZE)
 		blk_queue_max_write_zeroes_sectors(zram->disk->queue, UINT_MAX);
 
-	zram->disk->queue->backing_dev_info->capabilities |=
-			(BDI_CAP_STABLE_WRITES | BDI_CAP_SYNCHRONOUS_IO);
+	zram->disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES;
 	device_add_disk(NULL, zram->disk, zram_disk_attr_groups);
 
 	strlcpy(zram->compressor, default_compressor, sizeof(zram->compressor));
diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
index 412d21d8f64351..b4184dc9b41eb4 100644
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -1540,8 +1540,6 @@ static int btt_blk_init(struct btt *btt)
 	btt->btt_disk->private_data = btt;
 	btt->btt_disk->queue = btt->btt_queue;
 	btt->btt_disk->flags = GENHD_FL_EXT_DEVT;
-	btt->btt_disk->queue->backing_dev_info->capabilities |=
-			BDI_CAP_SYNCHRONOUS_IO;
 
 	blk_queue_logical_block_size(btt->btt_queue, btt->sector_size);
 	blk_queue_max_hw_sectors(btt->btt_queue, UINT_MAX);
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 94790e6e0e4ce1..436b83fb24ad61 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -478,7 +478,6 @@ static int pmem_attach_disk(struct device *dev,
 	disk->queue		= q;
 	disk->flags		= GENHD_FL_EXT_DEVT;
 	disk->private_data	= pmem;
-	disk->queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
 	nvdimm_namespace_disk_name(ndns, disk->disk_name);
 	set_capacity(disk, (pmem->size - pmem->pfn_pad - pmem->data_offset)
 			/ 512);
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 52583b6f2ea05d..860ea33571bce5 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -122,9 +122,6 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
  * BDI_CAP_NO_WRITEBACK:   Don't write pages back
  * BDI_CAP_NO_ACCT_WB:     Don't automatically account writeback pages
  * BDI_CAP_STRICTLIMIT:    Keep number of dirty pages below bdi threshold.
- *
- * BDI_CAP_SYNCHRONOUS_IO: Device is so fast that asynchronous IO would be
- *			   inefficient.
  */
 #define BDI_CAP_NO_ACCT_DIRTY	0x00000001
 #define BDI_CAP_NO_WRITEBACK	0x00000002
@@ -132,7 +129,6 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
 #define BDI_CAP_STABLE_WRITES	0x00000008
 #define BDI_CAP_STRICTLIMIT	0x00000010
 #define BDI_CAP_CGROUP_WRITEBACK 0x00000020
-#define BDI_CAP_SYNCHRONOUS_IO	0x00000040
 
 #define BDI_CAP_NO_ACCT_AND_WRITEBACK \
 	(BDI_CAP_NO_WRITEBACK | BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_ACCT_WB)
@@ -174,11 +170,6 @@ static inline int wb_congested(struct bdi_writeback *wb, int cong_bits)
 long congestion_wait(int sync, long timeout);
 long wait_iff_congested(int sync, long timeout);
 
-static inline bool bdi_cap_synchronous_io(struct backing_dev_info *bdi)
-{
-	return bdi->capabilities & BDI_CAP_SYNCHRONOUS_IO;
-}
-
 static inline bool bdi_cap_stable_pages_required(struct backing_dev_info *bdi)
 {
 	return bdi->capabilities & BDI_CAP_STABLE_WRITES;
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 6c26916e95fd4a..18eac97b10e502 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -3230,7 +3230,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
 	if (bdi_cap_stable_pages_required(inode_to_bdi(inode)))
 		p->flags |= SWP_STABLE_WRITES;
 
-	if (bdi_cap_synchronous_io(inode_to_bdi(inode)))
+	if (p->bdev && p->bdev->bd_disk->fops->rw_page)
 		p->flags |= SWP_SYNCHRONOUS_IO;
 
 	if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) {
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24  7:32 bdi cleanups v3 Christoph Hellwig
2020-07-24  7:33 ` [PATCH 01/14] fs: remove the unused SB_I_MULTIROOT flag Christoph Hellwig
2020-07-24  7:33 ` [PATCH 02/14] drbd: remove dead code in device_to_statistics Christoph Hellwig
2020-07-28 12:14   ` Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 03/14] drbd: remove RB_CONGESTED_REMOTE Christoph Hellwig
2020-07-24  7:33 ` [PATCH 04/14] bdi: initialize ->ra_pages in bdi_init Christoph Hellwig
2020-07-28 12:15   ` Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 05/14] md: update the optimal I/O size on reshape Christoph Hellwig
2020-07-28 12:18   ` Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 06/14] block: lift setting the readahead size into the block layer Christoph Hellwig
2020-07-28 12:23   ` Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 07/14] block: make QUEUE_SYSFS_BIT_FNS a little more useful Christoph Hellwig
2020-07-24  7:33 ` [PATCH 08/14] block: add helper macros for queue sysfs entries Christoph Hellwig
2020-07-24  7:33 ` [PATCH 09/14] bdi: remove BDI_CAP_CGROUP_WRITEBACK Christoph Hellwig
2020-07-24  7:33 ` Christoph Hellwig [this message]
2020-07-28 12:26   ` [PATCH 10/14] bdi: remove BDI_CAP_SYNCHRONOUS_IO Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 11/14] mm: use SWP_SYNCHRONOUS_IO more intelligently Christoph Hellwig
2020-07-28 12:28   ` Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 12/14] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag Christoph Hellwig
2020-07-28 12:54   ` Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 13/14] bdi: invert BDI_CAP_NO_ACCT_WB Christoph Hellwig
2020-07-28 12:32   ` Johannes Thumshirn
2020-07-24  7:33 ` [PATCH 14/14] bdi: replace BDI_CAP_NO_{WRITEBACK, ACCT_DIRTY} with a single flag Christoph Hellwig
2020-07-28 12:56   ` Johannes Thumshirn
2020-07-28 15:41 ` bdi cleanups v3 Jens Axboe
2020-07-28 19:20   ` Jens Axboe
  -- strict thread matches above, loose matches on Subject: below --
2020-07-26 15:03 Christoph Hellwig
2020-07-26 15:03 ` [PATCH 10/14] bdi: remove BDI_CAP_SYNCHRONOUS_IO Christoph Hellwig
2020-07-26 19:06   ` Minchan Kim
2020-07-27  7:58     ` Christoph Hellwig
2020-07-22  6:25 bdi cleanups v2 Christoph Hellwig
2020-07-22  6:25 ` [PATCH 10/14] bdi: remove BDI_CAP_SYNCHRONOUS_IO Christoph Hellwig
2020-07-20  7:51 bdi cleanups Christoph Hellwig
2020-07-20  7:51 ` [PATCH 10/14] bdi: remove BDI_CAP_SYNCHRONOUS_IO Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200724073313.138789-11-hch@lst.de \
    --to=hch@lst.de \
    --cc=axboe@kernel.dk \
    --cc=cgroups@vger.kernel.org \
    --cc=dm-devel@redhat.com \
    --cc=drbd-dev@lists.linbit.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=minchan@kernel.org \
    --cc=richard@nod.at \
    --cc=song@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git