Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	<linux-mtd@lists.infradead.org>
Subject: [PATCH v13 20/20] mtd: rawnand: Use the NAND framework user_conf object for ECC flags
Date: Thu, 27 Aug 2020 10:52:08 +0200
Message-ID: <20200827085208.16276-21-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20200827085208.16276-1-miquel.raynal@bootlin.com>

Instead of storing the ECC flags in chip->ecc.options, use
nanddev->ecc.user_conf.flags.

There is currently only one to save: NAND_ECC_MAXIMIZE.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/atmel/nand-controller.c |  3 ++-
 drivers/mtd/nand/raw/denali_pci.c            |  2 +-
 drivers/mtd/nand/raw/nand_base.c             | 14 +++++++-------
 drivers/mtd/nand/raw/sunxi_nand.c            |  3 ++-
 drivers/mtd/nand/raw/tegra_nand.c            |  5 +++--
 include/linux/mtd/rawnand.h                  |  1 -
 6 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 7fcc5e67163e..c3902e0e0b90 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1046,6 +1046,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
 	const struct nand_ecc_props *requirements =
 		nanddev_get_ecc_requirements(&chip->base);
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 	struct atmel_nand *nand = to_atmel_nand(chip);
 	struct atmel_nand_controller *nc;
 	struct atmel_pmecc_user_req req;
@@ -1070,7 +1071,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
 			chip->ecc.size = val;
 	}
 
-	if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+	if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
 		req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
 	else if (chip->ecc.strength)
 		req.ecc.strength = chip->ecc.strength;
diff --git a/drivers/mtd/nand/raw/denali_pci.c b/drivers/mtd/nand/raw/denali_pci.c
index 2f77ee55e1bf..20c085a30adc 100644
--- a/drivers/mtd/nand/raw/denali_pci.c
+++ b/drivers/mtd/nand/raw/denali_pci.c
@@ -100,7 +100,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto out_remove_denali;
 	}
 
-	dchip->chip.ecc.options |= NAND_ECC_MAXIMIZE;
+	dchip->chip.base.ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
 
 	dchip->nsels = nsels;
 
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 6a5f5699514f..10ac9c103237 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5017,9 +5017,6 @@ static int rawnand_dt_init(struct nand_chip *chip)
 	if (of_get_nand_on_flash_bbt(dn))
 		chip->bbt_options |= NAND_BBT_USE_FLASH;
 
-	if (of_property_read_bool(dn, "nand-ecc-maximize"))
-		chip->ecc.options |= NAND_ECC_MAXIMIZE;
-
 	of_get_nand_ecc_user_config(nand);
 	of_get_nand_ecc_legacy_user_config(chip);
 
@@ -5150,6 +5147,7 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
 static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
 	if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
@@ -5225,7 +5223,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 		 * used.
 		 */
 		if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
-		    ecc->options & NAND_ECC_MAXIMIZE) {
+		    nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
 			int steps, bytes;
 
 			/* Always prefer 1k blocks over 512bytes ones */
@@ -5465,11 +5463,12 @@ nand_maximize_ecc(struct nand_chip *chip,
  * @caps: ECC engine caps info structure
  * @oobavail: OOB size that the ECC engine can use
  *
- * Choose the ECC configuration according to following logic
+ * Choose the ECC configuration according to following logic.
  *
  * 1. If both ECC step size and ECC strength are already set (usually by DT)
  *    then check if it is supported by this controller.
- * 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength.
+ * 2. If the user provided the nand-ecc-maximize property, then select maximum
+ *    ECC strength.
  * 3. Otherwise, try to match the ECC step size and ECC strength closest
  *    to the chip's requirement. If available OOB size can't fit the chip
  *    requirement then fallback to the maximum ECC step size and ECC strength.
@@ -5480,6 +5479,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
 			 const struct nand_ecc_caps *caps, int oobavail)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 
 	if (WARN_ON(oobavail < 0 || oobavail > mtd->oobsize))
 		return -EINVAL;
@@ -5487,7 +5487,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
 	if (chip->ecc.size && chip->ecc.strength)
 		return nand_check_ecc_caps(chip, caps, oobavail);
 
-	if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+	if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
 		return nand_maximize_ecc(chip, caps, oobavail);
 
 	if (!nand_match_ecc_req(chip, caps, oobavail))
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index b7b764ef4b1d..2a7ca3072f35 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1609,12 +1609,13 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
 	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
 	struct mtd_info *mtd = nand_to_mtd(nand);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 	struct sunxi_nand_hw_ecc *data;
 	int nsectors;
 	int ret;
 	int i;
 
-	if (ecc->options & NAND_ECC_MAXIMIZE) {
+	if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
 		int bytes;
 
 		ecc->size = 1024;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 100c18ef8fe8..fbf67722a049 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,9 +840,10 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
 				   int strength_len, int bits_per_step,
 				   int oobsize)
 {
+	struct nand_device *base = mtd_to_nanddev(nand_to_mtd(chip));
 	const struct nand_ecc_props *requirements =
-		nanddev_get_ecc_requirements(&chip->base);
-	bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
+		nanddev_get_ecc_requirements(base);
+	bool maximize = base->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH;
 	int i;
 
 	/*
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 671e60948deb..aac07940de09 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -98,7 +98,6 @@ struct nand_chip;
  * pages and you want to rely on the default implementation.
  */
 #define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
-#define NAND_ECC_MAXIMIZE		BIT(1)
 
 /*
  * Option constants for bizarre disfunctionality and real
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply index

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-27  8:51 [PATCH v13 00/20] Introduction of the generic ECC framework Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 01/20] mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration Miquel Raynal
2020-09-07  7:25   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 02/20] mtd: rawnand: Rename the ECC algorithm enumeration items Miquel Raynal
2020-09-07  7:25   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 03/20] mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 04/20] mtd: nand: Add a NAND page I/O request type Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 05/20] dt-bindings: mtd: Document nand-ecc-placement Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 06/20] dt-bindings: mtd: Document nand-ecc-engine Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 07/20] dt-bindings: mtd: Document boolean NAND ECC properties Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 08/20] mtd: nand: Introduce the ECC engine framework Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 09/20] mtd: rawnand: Separate the ECC engine type and the ECC byte placement Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-10-14 21:36   ` Han Xu
2020-10-15  1:35     ` Fabio Estevam
2020-10-15  3:09       ` Han Xu
2020-10-15  7:25         ` Miquel Raynal
2020-10-16 17:09           ` Han Xu
2020-10-16 17:14             ` Miquel Raynal
2020-10-16 17:51               ` Han Xu
2020-10-16 18:00                 ` Miquel Raynal
2020-10-16 21:03                 ` Fabio Estevam
2020-10-19 15:51                   ` Han Xu
2020-10-19 16:52                     ` Fabio Estevam
2020-08-27  8:51 ` [PATCH v13 10/20] mtd: rawnand: Use the new ECC engine type enumeration Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:51 ` [PATCH v13 11/20] mtd: nand: Create a helper to extract the ECC configuration Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:52 ` [PATCH v13 12/20] mtd: spinand: Use nanddev_get_ecc_conf() when relevant Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:52 ` [PATCH v13 13/20] mtd: nand: Create helpers to set/extract the ECC requirements Miquel Raynal
2020-09-07  7:24   ` Miquel Raynal
2020-08-27  8:52 ` [PATCH v13 14/20] mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant Miquel Raynal
2020-09-07  7:23   ` Miquel Raynal
2020-08-27  8:52 ` [PATCH v13 15/20] mtd: nand: Use the new generic ECC object Miquel Raynal
2020-09-07  7:23   ` Miquel Raynal
2020-08-27  8:52 ` [PATCH v13 16/20] mtd: rawnand: Make use of the ECC framework Miquel Raynal
2020-09-07  7:23   ` Miquel Raynal
2020-08-27  8:52 ` [PATCH v13 17/20] mtd: rawnand: Use the ECC framework OOB layouts Miquel Raynal
2020-09-07  7:23   ` Miquel Raynal
2020-09-20 12:21   ` Janusz Krzysztofik
2020-09-29  8:15     ` Miquel Raynal
2020-09-29 21:26       ` Janusz Krzysztofik
2020-08-27  8:52 ` [PATCH v13 18/20] mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper Miquel Raynal
2020-09-07  7:23   ` Miquel Raynal
2020-08-27  8:52 ` [PATCH v13 19/20] mtd: rawnand: Use the ECC framework user input parsing bits Miquel Raynal
2020-09-07  7:23   ` Miquel Raynal
2020-09-21  9:36   ` Sascha Hauer
2020-09-28 15:18     ` Miquel Raynal
2020-08-27  8:52 ` Miquel Raynal [this message]
2020-09-07  7:23   ` [PATCH v13 20/20] mtd: rawnand: Use the NAND framework user_conf object for ECC flags Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200827085208.16276-21-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git