Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Fabio Estevam <festevam@gmail.com>, miquel.raynal@bootlin.com
Cc: vigneshr@ti.com, richard@nod.at, boris.brezillon@collabora.com,
	linux-mtd@lists.infradead.org, kernel@pengutronix.de,
	han.xu@nxp.com
Subject: Re: [PATCH v3] mtd: rawnand: mxc: Move the ECC engine initialization to the right place
Date: Mon, 26 Oct 2020 18:45:32 +0100
Message-ID: <20201026174532.6090-1-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20201016213613.1450-1-festevam@gmail.com>

On Fri, 2020-10-16 at 21:36:13 UTC, Fabio Estevam wrote:
> No ECC initialization should happen during the host controller probe.
> 
> In fact, we need the probe function to call nand_scan() in order to:
> 
> - identify the device, its capabilities and constraints (nand_scan_ident())
> - configure the ECC engine accordingly (->attach_chip())
> - scan its content and prepare the core (nand_scan_tail())
> 
> Moving these lines to mxcnd_attach_chip() fixes a regression caused by
> a previous commit supposed to clarify these steps.
> 
> When moving the ECC initialization from probe() to attach(), get rid
> of the pdata usage to determine the engine type and let the core decide
> instead.
> 
> Tested on a imx27-pdk board.
> 
> Reported-by: Fabio Estevam <festevam@gmail.com>
> Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
> Tested-by: Martin Kaiser <martin@kaiser.cx>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 21:36 Fabio Estevam
2020-10-18 19:42 ` Fabio Estevam
2020-10-19  9:13 ` Sascha Hauer
2020-10-25 18:01   ` Martin Kaiser
2020-10-26 17:45 ` Miquel Raynal [this message]
2020-10-26 17:49   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201026174532.6090-1-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=boris.brezillon@collabora.com \
    --cc=festevam@gmail.com \
    --cc=han.xu@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git