linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	<linux-mtd@lists.infradead.org>
Cc: Naga Sureshkumar Relli <nagasure@xilinx.com>,
	Michal Simek <monstr@monstr.eu>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH 1/5] dt-binding: mtd: nand: Document gpio-cs property
Date: Fri,  2 Apr 2021 08:49:11 +0200	[thread overview]
Message-ID: <20210402064915.220781-2-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20210402064915.220781-1-miquel.raynal@bootlin.com>

To reach higher capacities, arrays of chips are now pretty common.
Unfortunately, most of the controllers have been designed a decade ago
and did not all anticipate the need for several chip-selects. The new
cs-gpios property allows to workaround this limitation by adding as many
GPIO chip-select as needed.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 .../devicetree/bindings/mtd/nand-controller.yaml | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d0e422f4b3e0..6238ce683903 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -38,6 +38,15 @@ properties:
 
   ranges: true
 
+  cs-gpios:
+    description:
+      Array of chip-select available to the controller. The first
+      entries are a 1:1 mapping of the available chip-select on the
+      NAND controller (even if they are not used). As many additional
+      chip-select as needed may follow and should be phandles of GPIO
+      lines. 'reg' entries of the NAND chip subnodes become indexes of
+      this array when this property is present.
+
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -157,14 +166,19 @@ examples:
     nand-controller {
       #address-cells = <1>;
       #size-cells = <0>;
+      gpio-cs = <0>, <&gpioA 1>; /* A single native CS is available */
 
       /* controller specific properties */
 
       nand@0 {
-        reg = <0>;
+        reg = <0>; /* Native CS */
         nand-use-soft-ecc-engine;
         nand-ecc-algo = "bch";
 
         /* controller specific properties */
       };
+
+      nand@1 {
+        reg = <1>; /* GPIO CS */
+      };
     };
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2021-04-02  6:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-02  6:49 [PATCH 0/5] Bring GPIO CS support to the Arasan controller driver Miquel Raynal
2021-04-02  6:49 ` Miquel Raynal [this message]
2021-04-02  6:49 ` [PATCH 2/5] mtd: rawnand: Move struct gpio_desc declaration to the top Miquel Raynal
2021-04-02  6:49 ` [PATCH 3/5] mtd: rawnand: Add a helper to parse the gpio-cs DT property Miquel Raynal
2021-04-02  6:49 ` [PATCH 4/5] mtd: rawnand: arasan: Ensure proper configuration for the asserted target Miquel Raynal
2021-04-02  6:49 ` [PATCH 5/5] mtd: rawnand: arasan: Leverage additional GPIO CS Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210402064915.220781-2-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=monstr@monstr.eu \
    --cc=nagasure@xilinx.com \
    --cc=richard@nod.at \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).