[PATCH v2 3/3] mtd: mchp48l640: Add SPI ID table

[Mark Brown <broonie@kernel.org>]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/mtd/devices/mchp48l640.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/mtd/devices/mchp48l640.c b/drivers/mtd/devices/mchp48l640.c
index 231a10790196..b9cf2b4415a5 100644
--- a/drivers/mtd/devices/mchp48l640.c
+++ b/drivers/mtd/devices/mchp48l640.c
@@ -359,6 +359,15 @@ static const struct of_device_id mchp48l640_of_table[] = {
 };
 MODULE_DEVICE_TABLE(of, mchp48l640_of_table);
 
+static const struct spi_device_id mchp48l640_spi_ids[] = {
+	{
+		.name = "48l640",
+		.driver_data = (kernel_ulong_t)&mchp48l640_caps,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, mchp48l640_spi_ids);
+
 static struct spi_driver mchp48l640_driver = {
 	.driver = {
 		.name	= "mchp48l640",
@@ -366,6 +375,7 @@ static struct spi_driver mchp48l640_driver = {
 	},
 	.probe		= mchp48l640_probe,
 	.remove		= mchp48l640_remove,
+	.id_table	= mchp48l640_spi_ids,
 };
 
 module_spi_driver(mchp48l640_driver);
-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/