linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Miaoqian Lin <linmq006@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Paul Cercueil <paul@crapouillou.net>,
	Miaoqian Lin <linmq006@gmail.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Pratyush Yadav <p.yadav@ti.com>,
	Artem Bityutskiy <artem.bityutskiy@linux.intel.com>,
	Bastian Hecht <hechtb@googlemail.com>,
	Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3] mtd: rawnand: Fix return value check of wait_for_completion_timeout
Date: Tue, 12 Apr 2022 08:34:31 +0000	[thread overview]
Message-ID: <20220412083435.29254-1-linmq006@gmail.com> (raw)
In-Reply-To: <20220412102832.09957c35@xps13>

wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.

Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
---
change in v2:
- initialize ret to 1.
---
changes in v3:
- initialize ret to 0, now ret==0 means success.
- update condition check in caller.
---
 drivers/mtd/nand/raw/sh_flctl.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index b85b9c6fcc42..a278829469d6 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -384,7 +384,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
 	dma_addr_t dma_addr;
 	dma_cookie_t cookie;
 	uint32_t reg;
-	int ret;
+	int ret = 0;
+	unsigned long time_left;
 
 	if (dir == DMA_FROM_DEVICE) {
 		chan = flctl->chan_fifo0_rx;
@@ -425,13 +426,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
 		goto out;
 	}
 
-	ret =
+	time_left =
 	wait_for_completion_timeout(&flctl->dma_complete,
 				msecs_to_jiffies(3000));
 
-	if (ret <= 0) {
+	if (time_left == 0) {
 		dmaengine_terminate_all(chan);
 		dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
+		ret = -ETIMEDOUT;
 	}
 
 out:
@@ -441,7 +443,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
 
 	dma_unmap_single(chan->device->dev, dma_addr, len, dir);
 
-	/* ret > 0 is success */
+	/* ret == 0 is success */
 	return ret;
 }
 
@@ -465,7 +467,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
 
 	/* initiate DMA transfer */
 	if (flctl->chan_fifo0_rx && rlen >= 32 &&
-		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
+		!flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
 			goto convert;	/* DMA success */
 
 	/* do polling transfer */
@@ -524,7 +526,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
 
 	/* initiate DMA transfer */
 	if (flctl->chan_fifo0_tx && rlen >= 32 &&
-		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
+		!flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
 			return;	/* DMA success */
 
 	/* do polling transfer */
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2022-04-12  8:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-12  2:08 [PATCH] mtd: rawnand: Fix return value check of wait_for_completion_timeout Miaoqian Lin
2022-04-12  5:01 ` kernel test robot
2022-04-12  6:36   ` [PATCH v2] " Miaoqian Lin
2022-04-12  7:06     ` Miquel Raynal
2022-04-12  7:42       ` Miaoqian Lin
2022-04-12  7:48         ` Miquel Raynal
2022-04-12  8:23           ` Miaoqian Lin
2022-04-12  8:28             ` Miquel Raynal
2022-04-12  8:34               ` Miaoqian Lin [this message]
2022-04-21  7:35                 ` [PATCH v3] " Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220412083435.29254-1-linmq006@gmail.com \
    --to=linmq006@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=artem.bityutskiy@linux.intel.com \
    --cc=g.liakhovetski@gmx.de \
    --cc=hechtb@googlemail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=paul@crapouillou.net \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).