* [PATCH v4 0/3] Add support for Sercomm partitions
@ 2022-05-10 16:16 Mikhail Zhilkin
2022-05-10 16:24 ` [PATCH v4 2/3] dt-bindings: mtd: partitions: Extend fixed-partitions binding Mikhail Zhilkin
2022-05-10 16:26 ` [PATCH v4 3/3] mtd: parsers: add support for Sercomm partitions Mikhail Zhilkin
0 siblings, 2 replies; 3+ messages in thread
From: Mikhail Zhilkin @ 2022-05-10 16:16 UTC (permalink / raw)
To: Rob Herring, Miquel Raynal, Richard Weinberger, Vignesh Raghavendra
Cc: Krzysztof Kozlowski, devicetree, linux-kernel, linux-mtd, Karim,
M, Mikhail Zhilkin
This patch series add support for Sercomm mtd partition table parser. It's
used in some Beeline, Netgear and Sercomm routers. The Sercomm partition
map table contains real partition offsets, which may differ from device to
device depending on the number and location of bad blocks on NAND.
Changes since:
v3:
- Fix commit message of the first patch
- Add Reviewed-by to the second patch
v2:
- Fix mistakes in dt-binding
- Add patch for new vendor prefix
- Add vendor prefix to scpart-id property
v1:
- Add dt-binding in a separate patch
- Remove redundant braces and logical NOT operator
- Define pr_fmt
- Replace kcalloc by kzalloc
- Use of_get_child_count() and alloc big enough array before the
for_each_child_of_node()
Mikhail Zhilkin (3):
dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
dt-bindings: mtd: partitions: Extend fixed-partitions binding
mtd: parsers: add support for Sercomm partitions
.../mtd/partitions/fixed-partitions.yaml | 55 +++-
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/mtd/parsers/Kconfig | 9 +
drivers/mtd/parsers/Makefile | 1 +
drivers/mtd/parsers/scpart.c | 240 ++++++++++++++++++
5 files changed, 305 insertions(+), 2 deletions(-)
create mode 100644 drivers/mtd/parsers/scpart.c
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v4 2/3] dt-bindings: mtd: partitions: Extend fixed-partitions binding
2022-05-10 16:16 [PATCH v4 0/3] Add support for Sercomm partitions Mikhail Zhilkin
@ 2022-05-10 16:24 ` Mikhail Zhilkin
2022-05-10 16:26 ` [PATCH v4 3/3] mtd: parsers: add support for Sercomm partitions Mikhail Zhilkin
1 sibling, 0 replies; 3+ messages in thread
From: Mikhail Zhilkin @ 2022-05-10 16:24 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Rob Herring
Cc: Krzysztof Kozlowski, Rafał Miłecki, linux-mtd,
devicetree, linux-kernel, Karim, M, Mikhail Zhilkin,
Krzysztof Kozlowski
Extend fixed-partitions binding for support of Sercomm partition parser
(add "sercomm,sc-partitions" compatible).
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../mtd/partitions/fixed-partitions.yaml | 55 ++++++++++++++++++-
1 file changed, 53 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index ea4cace6a955..ad3ccd250802 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -19,7 +19,11 @@ maintainers:
properties:
compatible:
- const: fixed-partitions
+ oneOf:
+ - const: fixed-partitions
+ - items:
+ - const: sercomm,sc-partitions
+ - const: fixed-partitions
"#address-cells": true
@@ -27,7 +31,24 @@ properties:
patternProperties:
"@[0-9a-f]+$":
- $ref: "partition.yaml#"
+ allOf:
+ - $ref: "partition.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: sercomm,sc-partitions
+ then:
+ properties:
+ sercomm,scpart-id:
+ description: Partition id in Sercomm partition map. Mtd
+ parser uses this id to find a record in the partition map
+ containing offset and size of the current partition. The
+ values from partition map overrides partition offset and
+ size defined in reg property of the dts. Frequently these
+ values are the same, but may differ if device has bad
+ eraseblocks on a flash.
+ $ref: /schemas/types.yaml#/definitions/uint32
required:
- "#address-cells"
@@ -52,6 +73,7 @@ examples:
reg = <0x0100000 0x200000>;
};
};
+
- |
partitions {
compatible = "fixed-partitions";
@@ -64,6 +86,7 @@ examples:
reg = <0x00000000 0x1 0x00000000>;
};
};
+
- |
partitions {
compatible = "fixed-partitions";
@@ -82,6 +105,7 @@ examples:
reg = <0x2 0x00000000 0x1 0x00000000>;
};
};
+
- |
partitions {
compatible = "fixed-partitions";
@@ -119,3 +143,30 @@ examples:
};
};
};
+
+ - |
+ partitions {
+ compatible = "sercomm,sc-partitions", "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ sercomm,scpart-id = <0>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "dynamic partition map";
+ reg = <0x100000 0x100000>;
+ sercomm,scpart-id = <1>;
+ };
+
+ partition@200000 {
+ label = "Factory";
+ reg = <0x200000 0x100000>;
+ sercomm,scpart-id = <2>;
+ read-only;
+ };
+ };
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v4 3/3] mtd: parsers: add support for Sercomm partitions
2022-05-10 16:16 [PATCH v4 0/3] Add support for Sercomm partitions Mikhail Zhilkin
2022-05-10 16:24 ` [PATCH v4 2/3] dt-bindings: mtd: partitions: Extend fixed-partitions binding Mikhail Zhilkin
@ 2022-05-10 16:26 ` Mikhail Zhilkin
1 sibling, 0 replies; 3+ messages in thread
From: Mikhail Zhilkin @ 2022-05-10 16:26 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra
Cc: Mikhail Zhilkin, Hauke Mehrtens, NOGUCHI Hiroshi,
INAGAKI Hiroshi, linux-kernel, linux-mtd, Karim, M
This adds an MTD partition parser for the Sercomm partition table that
is used in some Beeline, Netgear and Sercomm routers.
The Sercomm partition map table contains real partition offsets, which
may differ from device to device depending on the number and location of
bad blocks on NAND.
This is essentially the same code as proposed by NOGUCHI Hiroshi:
Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
---
drivers/mtd/parsers/Kconfig | 9 ++
drivers/mtd/parsers/Makefile | 1 +
drivers/mtd/parsers/scpart.c | 240 +++++++++++++++++++++++++++++++++++
3 files changed, 250 insertions(+)
create mode 100644 drivers/mtd/parsers/scpart.c
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index 23763d16e4f9..851f4670d89b 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -186,3 +186,12 @@ config MTD_QCOMSMEM_PARTS
help
This provides support for parsing partitions from Shared Memory (SMEM)
for NAND and SPI flash on Qualcomm platforms.
+
+config MTD_SERCOMM_PARTS
+ tristate "Sercomm partition table parser"
+ depends on MTD
+ help
+ This provides partitions table parser for devices with Sercomm
+ partition map. This partition table contains real partition
+ offsets, which may differ from device to device depending on the
+ number and location of bad blocks on NAND.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index 2e98aa048278..2fcf0ab9e7da 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
+obj-$(CONFIG_MTD_SERCOMM_PARTS) += scpart.o
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o
diff --git a/drivers/mtd/parsers/scpart.c b/drivers/mtd/parsers/scpart.c
new file mode 100644
index 000000000000..d7bb736c9f2a
--- /dev/null
+++ b/drivers/mtd/parsers/scpart.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/mtd/scpart.c: Sercomm Partition Parser
+ *
+ * Copyright (C) 2018 NOGUCHI Hiroshi
+ * Copyright (C) 2022 Mikhail Zhilkin
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/module.h>
+
+#define MOD_NAME "scpart"
+
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+
+#define pr_fmt(fmt) MOD_NAME ": " fmt
+
+static const char sc_part_magic[] = {
+ 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
+};
+#define PART_MAGIC_LEN sizeof(sc_part_magic)
+
+/* assumes that all fields are set by CPU native endian */
+struct sc_part_desc {
+ uint32_t part_id;
+ uint32_t part_offs;
+ uint32_t part_bytes;
+};
+#define ID_ALREADY_FOUND 0xFFFFFFFFUL
+
+#define MAP_OFFS_IN_BLK 0x800
+
+#define MAP_MIRROR_NUM 2
+
+static int scpart_desc_is_valid(struct sc_part_desc *pdesc)
+{
+ return ((pdesc->part_id != 0xFFFFFFFFUL) &&
+ (pdesc->part_offs != 0xFFFFFFFFUL) &&
+ (pdesc->part_bytes != 0xFFFFFFFFUL));
+}
+
+static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
+ struct sc_part_desc **ppdesc)
+{
+ uint8_t *buf;
+ loff_t offs;
+ size_t retlen;
+ struct sc_part_desc *pdesc = NULL;
+ struct sc_part_desc *tmpdesc;
+ int cnt = 0;
+ int res2;
+ int res = 0;
+
+ buf = kzalloc(master->erasesize, GFP_KERNEL);
+ if (!buf) {
+ res = -ENOMEM;
+ goto out;
+ }
+
+ res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
+ if (res2 || retlen != master->erasesize) {
+ res = -EIO;
+ goto free;
+ }
+
+ offs = MAP_OFFS_IN_BLK;
+ while (offs < (master->erasesize - sizeof(*tmpdesc))) {
+ tmpdesc = (struct sc_part_desc *)&(buf[offs]);
+ if (!scpart_desc_is_valid(tmpdesc))
+ break;
+ cnt++;
+ offs += sizeof(*tmpdesc);
+ }
+
+ if (cnt > 0) {
+ int bytes = cnt * sizeof(*pdesc);
+
+ pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
+ if (!pdesc) {
+ res = -ENOMEM;
+ goto free;
+ }
+ memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
+
+ *ppdesc = pdesc;
+ res = cnt;
+ }
+
+free:
+ kfree(buf);
+
+out:
+ return res;
+}
+
+static int scpart_find_partmap(struct mtd_info *master,
+ struct sc_part_desc **ppdesc)
+{
+ loff_t offs;
+ uint8_t rdbuf[PART_MAGIC_LEN];
+ size_t retlen;
+ int magic_found = 0;
+ int res2;
+ int res = 0;
+
+ offs = 0;
+ while ((magic_found < MAP_MIRROR_NUM) &&
+ (offs < master->size) && !mtd_block_isbad(master, offs)) {
+ res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
+ if (res2 || (retlen != PART_MAGIC_LEN)) {
+ res = -EIO;
+ goto out;
+ }
+ if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
+ pr_debug("Signature found at 0x%llx\n", offs);
+ magic_found++;
+ res = scpart_scan_partmap(master, offs, ppdesc);
+ if (res > 0)
+ goto out;
+ }
+ offs += master->erasesize;
+ }
+
+out:
+ if (res > 0)
+ pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
+ else
+ pr_info("No valid 'SC PART MAP' was found\n");
+
+ return res;
+}
+
+static int scpart_parse(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct sc_part_desc *scpart_map = NULL;
+ struct mtd_partition *parts = NULL;
+ struct device_node *mtd_node;
+ struct device_node *ofpart_node;
+ struct device_node *pp;
+ const char *partname;
+ int nr_scparts;
+ int nr_parts = 0;
+ int n;
+ int res = 0;
+
+ mtd_node = mtd_get_of_node(master);
+ if (!mtd_node)
+ goto out;
+
+ ofpart_node = of_get_child_by_name(mtd_node, "partitions");
+ if (!ofpart_node)
+ goto out;
+
+ nr_scparts = scpart_find_partmap(master, &scpart_map);
+ if (nr_scparts <= 0) {
+ res = nr_scparts;
+ goto free;
+ }
+
+ parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
+ GFP_KERNEL);
+ if (!parts) {
+ res = -ENOMEM;
+ goto out;
+ }
+
+ for_each_child_of_node(ofpart_node, pp) {
+ u32 scpart_id;
+
+ if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
+ continue;
+
+ for (n = 0 ; n < nr_scparts ; n++)
+ if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
+ (scpart_id == scpart_map[n].part_id))
+ break;
+ if (n >= nr_scparts)
+ /* not match */
+ continue;
+
+ /* add the partition found in OF into MTD partition array */
+ parts[nr_parts].offset = scpart_map[n].part_offs;
+ parts[nr_parts].size = scpart_map[n].part_bytes;
+ parts[nr_parts].of_node = pp;
+
+ if (!of_property_read_string(pp, "label", &partname))
+ parts[nr_parts].name = partname;
+ if (of_property_read_bool(pp, "read-only"))
+ parts[nr_parts].mask_flags |= MTD_WRITEABLE;
+ if (of_property_read_bool(pp, "lock"))
+ parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
+
+ /* mark as 'done' */
+ scpart_map[n].part_id = ID_ALREADY_FOUND;
+
+ nr_parts++;
+ }
+
+ if (nr_parts > 0) {
+ *pparts = parts;
+ res = nr_parts;
+ } else
+ pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
+
+ of_node_put(pp);
+
+free:
+ kfree(scpart_map);
+ if (res <= 0)
+ kfree(parts);
+
+out:
+ return res;
+}
+
+static const struct of_device_id scpart_parser_of_match_table[] = {
+ { .compatible = "sercomm,sc-partitions" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
+
+static struct mtd_part_parser scpart_parser = {
+ .parse_fn = scpart_parse,
+ .name = "scpart",
+ .of_match_table = scpart_parser_of_match_table,
+};
+module_mtd_part_parser(scpart_parser);
+
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("scpart");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
+MODULE_DESCRIPTION("Sercomm partition parser");
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-05-10 16:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-10 16:16 [PATCH v4 0/3] Add support for Sercomm partitions Mikhail Zhilkin
2022-05-10 16:24 ` [PATCH v4 2/3] dt-bindings: mtd: partitions: Extend fixed-partitions binding Mikhail Zhilkin
2022-05-10 16:26 ` [PATCH v4 3/3] mtd: parsers: add support for Sercomm partitions Mikhail Zhilkin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).