linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Christian Lamparter <chunkeey@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: dev@aboehler.at, miquel.raynal@bootlin.com
Subject: [PATCH v2] Revert "mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash"
Date: Tue,  7 Jun 2022 20:59:18 +0200	[thread overview]
Message-ID: <20220607185918.1048204-1-chunkeey@gmail.com> (raw)
In-Reply-To: <20220607081342.174b9584@xps-13>

This reverts commit 3380557fc7e28d9bce7607e16d98f123d36da4ca.

It turned out this "4-byte" ID might have been an honest mistake.
Regrettably, the chip Andreas has might be a counterfeit or is
damaged in some other way and shouldn't have ended up in a router.

Andreas reported his chip is returning just four bytes:
"98 f1 80 15 00 00 00 00".

However, according to Kioxia/Toshiba's datasheet, there should
have been at least another byte that would have contained the
correct OOB size that Andreas needed.

Miquel and Andreas are both favoring reverting the patch over
further, possibly hacky modifications:
"[Reverting] is the safest option here. Apart from this device, we
do not know how many devices have these damaged/counterfeit chips.
If it is just a couple and only on Fritzboxes, as suggested in the
Github issue the patch could be carried through OpenWrt[...]"

Thanks to several users on the openwrt forum and github issue,
who stayed along for the ride:
 - Peter-vdL for reporting the issue and testing patches.
 - neg2led and Hannu Nyman who did all the
   datasheet digging and debugging.

Cc: Andreas Boehler <dev@aboehler.at>
Suggested-by: Andreas Boehler <dev@aboehler.at>
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://github.com/openwrt/openwrt/issues/9962
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---

v1->v2
 - replaced the o-umlaut in Andreas' last name with "oe"
   <https://en.wikipedia.org/wiki/%C3%96>
   "In other languages that do not have the letter as part of
   the regular alphabet or in limited character sets such as
   ASCII, o-umlaut is frequently replaced with the digraph oe"
 - added note about why the revert option was taken
  (If the shout-out at the end is a problem, please just drop it
   then. I don't want to cause any privacy related stomage aches).
---
 drivers/mtd/nand/raw/nand_ids.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index 88c2440b47d8..dacc5529b3df 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -29,9 +29,6 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"TC58NVG0S3E 1G 3.3V 8-bit",
 		{ .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} },
 		  SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), },
-	{"TC58NVG0S3HTA00 1G 3.3V 8-bit",
-		{ .id = {0x98, 0xf1, 0x80, 0x15} },
-		  SZ_2K, SZ_128, SZ_128K, 0, 4, 128, NAND_ECC_INFO(8, SZ_512), },
 	{"TC58NVG2S0F 4G 3.3V 8-bit",
 		{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
 		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
-- 
2.36.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2022-06-07 18:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-20 10:40 [PATCH] mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash Andreas Böhler
2022-04-21  7:36 ` Miquel Raynal
2022-06-05 15:31 ` Christian Lamparter
2022-06-06 13:59   ` Miquel Raynal
2022-06-06 19:29     ` [PATCH] Revert "mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash" Christian Lamparter
2022-06-07  6:13       ` Miquel Raynal
2022-06-07 18:59         ` Christian Lamparter [this message]
2022-06-09 13:10           ` [PATCH v2] " Miquel Raynal
2022-06-06 19:37     ` [PATCH] mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash Christian Lamparter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220607185918.1048204-1-chunkeey@gmail.com \
    --to=chunkeey@gmail.com \
    --cc=dev@aboehler.at \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).